Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) Service Manual ▷ View online
MX-5141N MX-FN18 (SADDLE STITCH FINISHER) 14 – 5
2)
Remove the screw, and remove the connector cover on rear
side of the finisher.
side of the finisher.
3)
Check that the center of the screw hole of the finisher is in the
range of specification of an oval hole of the connection fixture
that exist on main body rear side.
range of specification of an oval hole of the connection fixture
that exist on main body rear side.
* When not the range of specification, execute the following
adjustment. If the adjustment is not required, Progress to the
procedure of "I. Connection of the saddle stitch finisher".
procedure of "I. Connection of the saddle stitch finisher".
E. Adjustment
1)
Remove the finisher from the main unit.
2)
Open the front door.
3)
Remove the cabinet fixing screw.
4)
Remove the screw, and remove the front lower cabinet 1.
Remove the fixing screw of the front lower cabinet 2.
Remove the fixing screw of the front lower cabinet 2.
MX-5141N MX-FN18 (SADDLE STITCH FINISHER) 14 – 6
5)
Remove the screws, and slide to the left the front lower cabinet
2, and remove it.
2, and remove it.
6)
Remove the fixing tapes.
7)
Remove the screws, and remove the rear lower cover.
8)
Remove the fixing tapes.
9)
Loosen the caster fixing screws.
10) Remove the screw, and remove the spanner installed inside
the front door.
MX-5141N MX-FN18 (SADDLE STITCH FINISHER) 14 – 7
11) Turn the bolt for which the adjustment is necessary, and adjust
to become it within the range of specification.
12) Check to insure that the upper and lower clearances between
the main unit and the finisher are even.
13) Tighten the caster fixing screws so that the indicator scale is
fit.
14) Install the rear lower cover with the fixing screws.
15) Install the front lower cabinet 2 with the fixing screws.
MX-5141N MX-FN18 (SADDLE STITCH FINISHER) 14 – 8
16) Install the front lower cabinet 1 with the fixing screws.
17) Attach the cabinet fixing screw.
18) Install the spanner for adjustment to inside the front door with
screw.
19) Close the front door.
F. Connection of the saddle stitch finisher
1)
Engage the saddle stitch finisher to the main unit.
2)
Fix the saddle stitch finisher to the main unit with the step
screw B (Packed items (No.4)).
screw B (Packed items (No.4)).
3)
Close the front cover.
Click on the first or last page to see other MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) service manuals if exist.