Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V MX-LC17 N (LARGE CAPACITY TRAY) 6 – 3
5)
Temporarily fix the fixing screw B (Packed item No.5) midway.
6)
Insert the temporarily fixed screw B into the key hole in the con-
nection unit and temporarily fix the connection unit.
nection unit and temporarily fix the connection unit.
7)
Fix the other fixing screw B and tighten the temporarily fixed
screw B securely.
screw B securely.
8)
Attach the right under cover back to the main unit.
9)
Fix the fixing screw, and attach the screw cap back to the main
unit.
unit.
10) While lifting the section marked with ○ insert the connection unit
into the large capacity tray unit and fix the fixing screw C (Packed
item No.6) at the mark A on the connection unit.
item No.6) at the mark A on the connection unit.
C. Height adjustment
1)
Put the large capacity tray unit closer to the main unit.
Ĭ
ĭ
ĭ
Ĭ
Ĭ
ĭ
Ĭ
Ĭ
ĭ
A
B
MX-4070V MX-LC17 N (LARGE CAPACITY TRAY) 6 – 4
2)
Check to insure that the height adjustment check rib of the large
capacity tray unit and the axis line of the mounting plate upper
mounted to the main unit are in the same line.
capacity tray unit and the axis line of the mounting plate upper
mounted to the main unit are in the same line.
3)
If the height adjustment is not required, insert the large capacity
tray unit further more.
tray unit further more.
If the height adjustment is required, perform the adjustment pro-
cedure from 4).
cedure from 4).
4)
Loosen the adjustment screw on the F side.
NOTE: Use the adjustment screw on the front side for the adjust-
ment. Do not touch the screw on the rear side.
NOTE: If the screw is loosened or removed when servicing, be
sure to execute C Height adjustment after completion of
servicing.
servicing.
5)
In the case of a shift to the right, press the front upper section and
fit the height adjustment check rib so that it is in the same line with
the axis line of the mounting plate upper. Insert the large capacity
tray unit into the main unit.
fit the height adjustment check rib so that it is in the same line with
the axis line of the mounting plate upper. Insert the large capacity
tray unit into the main unit.
6)
In the case of a shift to the left, lift the grid so that the height
adjustment check rib is in the same line with the axis line of the
mounting plate upper and insert the large capacity tray unit.
adjustment check rib is in the same line with the axis line of the
mounting plate upper and insert the large capacity tray unit.
7)
Tighten the loosened screw.
OK
NG
NG
MX-4070V MX-LC17 N (LARGE CAPACITY TRAY) 6 – 5
D. Connector connection
1)
Remove the connector cover.
Do not use the connector cover removed.
2)
Connect the connector.
If the heater kit is not installed, there is no need to connect the
heater connector to the connector.
heater connector to the connector.
E. Paper size switch
1)
Remove Rear cabinet.
2)
Remove fixing screw (4 pcs of blue screw) on upper and lower
side of Side plate F and Side plate R.
side of Side plate F and Side plate R.
3)
Insert the lower side according to the engraved mark on the lower
side of Side plate F and Side plate R. Tighten upper and lower
side using the fixing screws being removed.
side of Side plate F and Side plate R. Tighten upper and lower
side using the fixing screws being removed.
Ĭ
ĭ
.%%JCTPGUUKUEQXGTGFYKVJCEQPPGEVQTEQXGT
The dehumidifier heater connector
MX-LC17 connector
Ĭ
ĭ
Ĭ
ĭ
Ĭ
Ĭ
Ĭ
Ĭ
Ĭ
Ĭ
Ĭ
ĭ
F side
R side
MX-4070V MX-LC17 N (LARGE CAPACITY TRAY) 6 – 6
4)
Switching Rear edge plate
Remove the blue screws fixing the upper and lower Rear edge
plate respectively.
plate respectively.
5)
Insert Size guide according to the engraved mark. Tighten upper
and lower side using the fixing screws being removed (A4).
and lower side using the fixing screws being removed (A4).
(LT)
(B5)
In the case of A4 size
Screw
When it be sawed from the top, the line of the hole almost
overlaps with bold line of each size and sees it.
overlaps with bold line of each size and sees it.
Screw
In the case of LT size
Screw
In the case of B5 size
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.