Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V MX-RB25 N (PAPER PASS UNIT) 9 – 1
MX-4070V
Service Manual
[9] MX-RB25 N (PAPER PASS UNIT)
1. Unpacking
1)
Open the box.
2)
Take the unit out of the box, and remove the plastic bag.
3)
Remove the tape.
2. Packed items check
Bundled Parts are only the screws.
Bundled parts
No.
Name
QTY
1
Main unit of interface unit
1
2
Screw A (S Tight Bind 4-6)
2
3
Screw B (S Tight Cup 3-8)
5
4
Screw C (S Tight Bind 3-30)
1
5
Fin relay harness unit
1
6
Reverse gate tray
1
7
Base resting cushion
1
8
Harness A
(Not used)
1
9
Harness B
(Not used)
1
10
Harness C
(Not used)
1
1
2
3
4
5
6
7
8
9
10
MX-4070V MX-RB25 N (PAPER PASS UNIT) 9 – 2
3. Installation
1)
Pull out the paper tray1, and remove the screw (x1) fixing the left
cabinet.
cabinet.
2)
Open the front cabinet, and remove the screw (x1) fixing the left
cabinet.
cabinet.
3)
Pull out the grip at the left side of the main unit, and remove the
left cabinet while sliding it to the front side.
left cabinet while sliding it to the front side.
4)
Remove the left cabinet upper from the left cabinet.
MX-4070V MX-RB25 N (PAPER PASS UNIT) 9 – 3
5)
Mount the left cabinet, and fix it with the screws (x2).
6)
Put the grip back to the original position
Close the paper tray1.
Close the paper tray1.
7)
Remove four lower kick-out sponge rollers.
Be sure not to leave the pieces of the sponge.
8)
Adjust the front and rear position of the shifter by aligning the
edge of the recessed part with the triangular marking position.
edge of the recessed part with the triangular marking position.
9)
Mount the interface unit from the left side of main unit while sliding
it on the basis of the back side.
it on the basis of the back side.
MX-4070V MX-RB25 N (PAPER PASS UNIT) 9 – 4
10) Fix the interface unit with the screws (Packed items No.2 x2).
11) Fix the interface unit with the screws (Packed items No.3 x2).
12) Close the front cabinet.
13) Affix base resting cushion on back side of reverse gate tray.
14) Attach the reverse gate tray (Packed item No.6)
15) Remove the connector cover of the rear side of the main unit.
0mm
2.0mm
2.0mm
0mm
Reference position
(Hole edge face)
Reference position (Hole edge face)
Ĭ
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.