Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V MX-FN27 N (FINISHER) 7 – 3
10) Attach the sheet (Packed item No.22) to the paper guide.
11) Attach the Mylar to the main unit. (with reference to the edge of
the upper left).
12) Mount the screw bracket to the main unit while sliding it from the
left side.
13) Attach the positioning plate to the main unit.(Package item No.6)
Affixation reference line
MX-4070V MX-FN27 N (FINISHER) 7 – 4
14) Set the lower part of the positioning plate to the lower part of the
delivery unit.
15) Raise the positioning plate, and then slightly lift up the positioning
plate F side while sliding it to F side.
16) Insert the pawl of the positioning plate R side into the socket on
the main unit side.
17) Insert the pawl of the plate F side into the socket on the main unit
side.
18) Insert the pawl into the section between ▲ marks of the main unit
side.
19) Fit the plate to the dowel, and fix it with the screw (Package item
No.14).
20) Attach the front cabinet (Package item No.10), and fix it with the
screws (Package item No.18 x2).
MX-4070V MX-FN27 N (FINISHER) 7 – 5
21) Attach the base plate to the main unit (Package item No.7).
22) Fix the plate with the screws (Package item No.13 x2).
Rear side
Front side
23) Attach the dummy punch unit (Package item No.3).
24) Fix the dummy punch unit with the screws (Package item No. 15
x1).
#NKIPVJGJQNGQHVJGRNCVG
YKVJVJGDQUUQHVJG
RNCVGOQWPVGFHKTUV
YKVJVJGDQUUQHVJG
RNCVGOQWPVGFHKTUV
MX-4070V MX-FN27 N (FINISHER) 7 – 6
25) Attach the punch unit cover (Package item No.4), and fix it with
the screw (Package item No.15 x1).
26) Take the orange parts(x2) out of the inner finisher.
*Keep the orange part if finisher will be transferred to the other
location.
location.
27) Attach the connector cover (Packed items No.12) to the inner fin-
isher with the screws (Packed items No.15).
28) Mount the inner finisher while sliding it from the left side of the
main unit.
29) Fix the inner finisher with the screws (Package item No17 x2).
Rear side
Front side
Ĭ
ĭ
Finisher attaching
direction
direction
The harnesses could be pinched at the red frame part
shown in the figure during attaching the finisher and hook
the harness with the rein parts.
shown in the figure during attaching the finisher and hook
the harness with the rein parts.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.