Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V MX-RB25 N (PAPER PASS UNIT) 9 – 5
16) Cut the section where the harness gets through with the nipper.
17) Secure the harness of the interface unit with the screw (Packed
items No.3 x1), and connect the connector.
18) Remove two screws of the rear cabinet of the main unit and attach
the step screw at one place.
19) Fix it with the screw.
20) Insert the harness fixing plate to the groove of main unit and fix
the harness fixing plate with the screw B (Packed items No.3).
21) Connect the connector to the PWB.
22) Pass the harness of the relay unit through the wire saddle.
23) Secure the connector cover with the screw (x1).
Remove two screws
Fix it with the screwB
(Packed items No.3)
Fix it with the screwC
(Packed items No.4)
Screw B(No.3)
Insert the harness fixing plate to
the groove of main unit.
the groove of main unit.
Connect the connector to the PWB.
MX-4070V MX-FN28 (FINISHER) 10 – 1
MX-4070V
Service Manual
[10] MX-FN28 (FINISHER)
1. Unpacking
A. Packed items check
B. Removal of the finisher
NOTE: It is recommendable to work by two or more persons.
1)
Cut the tapes at four corners, and remove the fixture.
2)
Take off the top case, and remove the cushioning materials.
3)
Take out the finisher from the plastic bag.
While holding the upper parts of the finisher by two people, pull up
the finisher, and then make it stand upright.
the finisher, and then make it stand upright.
C. Removal of the fixing tape and protection
material
1)
Remove the fixing tape/protection materials.
2)
Open the front upper cover, and remove the fixing tape/protection
materials.
materials.
No.
Name
Quantity
1
Shift tray
1
2
Guide plate
1
3
Screw (M3x6)
5
4
Screw (M4x8)
1
5
Screw (M4x12)
4
6
Earth plate
1
7
Bracket
1
1
2
3
4
5
6
7
MX-4070V MX-FN28 (FINISHER) 10 – 2
2. Installation
A. Installation of earth plate
1)
Install the earth plate (Packed items (No.6)) with the screws
(Packed item (No.3 M3x6)).
(Packed item (No.3 M3x6)).
B. Installation of the guide plate
1)
Install the guide plate (Packed items (No.2)) with the screws
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
C. Installation of the shift tray
1)
Insert the shift tray (Packed item No.1) into the finisher of the main
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
MX-4070V MX-FN28 (FINISHER) 10 – 3
D. Installation of the bracket
1)
Install the bracket (Packed item No.7) with the screw (Packed
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
E. Installation of the finisher
1)
Attach the connector of the finisher and fix it with the screw.
2)
Open the front cover.
3)
Remove the screw fixing the finisher in the picture below.
Pull out the lock lever, and lower it
Ĭ
ĭ
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.