Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V Heater kit 5 – 9
For Taiwan, South africa.
9-a Remove the harness.
9-b Install the core to the harness. Be aware of the direction
of the core.
Protrusions on the core should be placed in the right
direction.
of the core.
Protrusions on the core should be placed in the right
direction.
9-c Return the harness to the original position.
10) Remove the dark sheet from the LSU.
11) Add the LSU plate to the LSU.
MX-4070V Heater kit 5 – 10
12) Re-attach the LSU.
13) Attach the LSU. Secure it with the screw and connect the connec-
tors.
14) Attach the cabinet lower.
15) Secure the left cabinet cover with the screw.
16) Close the front cover.
17) Secure the left cabinet cover with the screw.
ĭ
ĭ
Į
Ĭ
Ĭ
ĭ
Į
Į
MX-4070V Heater kit 5 – 11
18) Close the 1 cassette.
B. Heater electric component kit installation
(1)
WH PWB attachment
1)
Remove the rear cabinet.
2)
Remove the harness form the guide.
Attach the harness to the guide when attach the connector.
3)
Disconnect the connector.
4)
Remove the harness form the saddle.
5)
Remove the three screws.
Ĭ
Ĭ
Ĭ
Ĭ
Ĭ
Ĭ
ĭ
MX-4070V Heater kit 5 – 12
6)
Open the MC cover.
7)
Remove the two screws.
8)
Open the PCU cover.
9)
Remove the snap band. And remove the connecter.
10) Attach the 4 supporters.
11) Attach the WH PWB.
12) Re-connect the connector.
Ĭ
ĭ
Ĭ
ĭ
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.