Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man9) Service Manual ▷ View online
MX-2300/2700 N/G SIMULATION 7 – 18
9
9-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and detectors in the duplex section
and its control circuit.
and its control circuit.
Section
Duplex
Item
Operation
Operation/Procedure
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
9-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the loads
in the duplex section and the control cir-
cuits.
cuits.
Section
Duplex
Item
Operation
Operation/Procedure
1) Select the item to be operation tested with the buttons on the
1) Select the item to be operation tested with the buttons on the
touch panel.
2) Press [EXECUTE] button.
The selected load operation is performed.
When [EXECUTE] button is pressed, the output is terminated.
When [EXECUTE] button is pressed, the output is terminated.
10
10-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the toner
motor and the related circuit.
Section
Process (Developing)
Item
Operation
Operation/Procedure
* Before execution of this simulation, remove the toner cartridges.
1)
* Before execution of this simulation, remove the toner cartridges.
1)
Select the item to be checked with the buttons on the touch
panel.
panel.
2)
Press [EXECUTE] button.
* The selected load operation is performed for 10 sec.
* When [EXECUTE] button is pressed, the operation is termi-
* The selected load operation is performed for 10 sec.
* When [EXECUTE] button is pressed, the operation is termi-
nated.
13
13--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "U1" trouble.
Section
Section
FAX
Item
Trouble
Operation/Procedure
1)
1)
Press [EXECUTE] button.
2)
Press [YES] button to execute cancellation of the trouble.
DSW_ADU
ADU transport open/close detection
APPD1
ADU transport path detection 1
APPD2
ADU transport path detection 2
ADUM_L
ADU motor lower
0
ADU SENSOR CHECK
1/1
CLOSE
SIMULATION NO.09㧙02
TEST
1/1
DSW_ADU
APPD1
APPD2
0
SIMULATION NO.09-03
TEST
ADU LOAD CHECK
EXECUTE
1/1
ADUM_L
CLOSE
TNM_K
Toner motor K
TNM_C
Toner motor C
TNM_M
Toner motor M
TNM_Y
Toner motor Y
0
SIMULATION NO.10-01
TEST
TONER MOTOR ACTIVATION
EXECUTE
1/1
TNM_K
CLOSE
TNM_C
TNM_M
TNM_Y
0
SIMULATION NO.13
TEST
U1 TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
MX-2300/2700 N/G SIMULATION 7 – 19
14
14--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel excluding the self-diag U1/
LCC/U2/PF troubles.
Section
—
Item
Trouble
Operation/Procedure
1) Press [EXECUTE] button.
2) Press [YES] button to execute cancellation of the trouble.
1) Press [EXECUTE] button.
2) Press [YES] button to execute cancellation of the trouble.
15
15--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "U6-09" (large
capacity paper feed tray) trouble.
Section
LCC
Item
Trouble
Operation/Procedure
1) Press [EXECUTE] button.
2) Press [YES] button to execute cancellation of the trouble.
1) Press [EXECUTE] button.
2) Press [YES] button to execute cancellation of the trouble.
16
16--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag U2 trouble.
Section
Section
MFPcnt PWB / PCU PWB / SCU PWB
Item
Trouble
Operation/Procedure
1) Press [EXECUTE] button.
2) Press [YES] button to execute cancellation of the trouble.
1) Press [EXECUTE] button.
2) Press [YES] button to execute cancellation of the trouble.
17
17--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag PF.
Section
Section
Communication unit (RIC/MODEM)
Item
Trouble
Operation/Procedure
1)
1)
Press [EXECUTE] button.
2)
Press [YES] button to execute cancellation of the trouble.
21
21-1
Purpose
Setting
Function (Purpose) Used to set the maintenance cycle.
Section
Section
—
Item
Specifications
Operation/Procedure
1)
1)
Select an item corresponding to the set contents with [
↑] [↓]
buttons.
2)
Enter the value corresponding to the maintenance timing with
10-key.
10-key.
3)
Press [OK] button to save the entered conditions in step 2).
0
SI MU LA TI O N N O. 1 4
TEST
TROUBLE CANCELLATION(OTHER)
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
0
SIMULATION NO.15
TEST
LCC TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
Item
Display
Content
Set range
Default
value
A
MAINTENANCE
COUNTER
(TOTAL)
COUNTER
(TOTAL)
Maintenance
counter
(total)
counter
(total)
0: DEFAULT,
1 – 300: 1K – 300K
999: FREE
1 – 300: 1K – 300K
999: FREE
100K
B
MAINTENANCE
COUNTER
(COLOR)
COUNTER
(COLOR)
Maintenance
counter
(color)
counter
(color)
0: DEFAULT,
1 – 300: 1K – 300K
999: FREE
1 – 300: 1K – 300K
999: FREE
60K
0
SIMULATION NO.16
TEST
U2 TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
0
SIMULATION NO.17
TEST
PF TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
MX-2300/2700 N/G SIMULATION 7 – 20
22
22-1
Purpose
Adjustment/Setup/Operation data check
Function (Purpose) Used to check the print count value in each
section and each operation mode. (Used to
check the maintenance timing.)
check the maintenance timing.)
Section
—
Item
Counter
Operation/Procedure
Change the display page with [
Change the display page with [
↑] [↓] buttons.
Press [COLOR] or [BLACK] button to print.
22-2
Purpose
Adjustment/Setup/Operation data check
Function (Purpose) Used to check the total numbers of misfeed
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
jam is considerably great, it is judged as
necessary for repair.)
Section
—
Item
Counter
Operation/Procedure
The paper jam/trouble counter value is displayed.
Press [COLOR] or [BLACK] button to print.
The paper jam/trouble counter value is displayed.
Press [COLOR] or [BLACK] button to print.
22-3
Purpose
Adjustment/Setup/Operation data check
Function (Purpose) Used to check misfeed positions and the
misfeed count of each position.
Section
—
Item
Trouble
Operation/Procedure
The history of paper jams and misfeed is displayed.
The above histories are displayed from the newest one to the old-
est in this sequence. The max. 50 items are saved. (The oldest one
is sequentially erased.)
* List of JAM codes: Refer to "2. Paper JAM code" in the "[12]
The history of paper jams and misfeed is displayed.
The above histories are displayed from the newest one to the old-
est in this sequence. The max. 50 items are saved. (The oldest one
is sequentially erased.)
* List of JAM codes: Refer to "2. Paper JAM code" in the "[12]
OTHERS."
TOTAL OUT(BW)
Total output quantity of black
TOTAL OUT(COL)
Total output quantity of color
TOTAL(BW)
Total use quantity of black
TOTAL(COL)
Total use quantity of color
TOTAL(2COL)
Total use quantity of 2-color
TOTAL(SGL_COL)
Total use quantity of single color
COPY(BW)
Black copy counter
COPY(COL)
Color copy counter
COPY(2COL)
2-color copy counter
COPY(SGL_COL)
Single color copy counter
PRINT(BW)
Black print counter
PRINT(COL)
Color print counter
DOC FIL(BW)
Black document filing print counter
DOC FIL(COL)
Color document filing print counter
DOC FIL(2COL)
2-color document filing print counter
DOC FIL(SGL COL)
Single-color document filing print counter
OTHER(BW)
Black other counter
OTHER(COL)
Color other counter
MAINTENANCE ALL
Maintenance counter (Total)
MAINTENANCE COL
Maintenance counter (Color)
TC1 BELT
Primary transfer unit print counter
TC1 BELT RANGE
Primary transfer unit accumulated traveling
distance (cm)
distance (cm)
TC1 BELT DAY
Use day of primary transfer (Day)
TC2 BELT
Secondary transfer unit print counter
TC2 BELT RANGE
Secondary transfer unit accumulated traveling
distance (cm)
distance (cm)
TC2 BELT DAY
Use day of secondary transfer unit (Day)
FUSER UNIT
Fuser unit print counter
FUSER ACUM DAY
Use day of fuser unit (Day)
DRUM LIFE(K)
Accumulated number of drum rotations (K)
DRUM LIFE(C)
Accumulated number of drum rotations (C)
DRUM LIFE(M)
Accumulated number of drum rotations (M)
DRUM LIFE(Y)
Accumulated number of drum rotations (Y)
DEVE LIFE(K)
Accumulated number of developer rotations (K)
DEVE LIFE(C)
Accumulated number of developer rotations (C)
DEVE LIFE(M)
Accumulated number of developer rotations (M)
DEVE LIFE(Y)
Accumulated number of developer rotations (Y)
0
A
A: 0
B: 0
; MAINTENANCE COUNTER (TOTAL)
; MAINTENANCE COUNTER (COLOR)
; MAINTENANCE COUNTER (COLOR)
SIMULATION NO.21-01
MAINTENANCE CYCLE SETUP
0
[ 1~300]
OK
TEST
CLOSE
MACHINE JAM
Machine JAM counter
RSPF/DSPF JAM
SPF JAM counter
TROUBLE
Trouble counter
TOTAL OUT(BW)
SIMULATION NO.22-01
TEST
COUNTER DISPLAY
CLOSE
TOTAL(SGL_COL)
TOTAL OUT(COL)
COPY(BW)
TOTAL(BW)
COPY(COL)
TOTAL(COL)
COPY(2COL)
TOTAL(2COL)
: 00000000
: 00000000
: 00000000
: 00000000
: 00000000
: 00000000
: 00000000
: 00000000
: 00000000
: 00000000
COPY(SGL_COL)
1/3
0
MACHINE JAM
SIMULATION NO.22-02
TEST
JAM/TROUBLE COUNTER DISPLAY
CLOSE
RSPF/DSPF JAM
TROUBLE
: 00000000
: 00000000
: 00000000
1/1
0
0
CLOSE
JAM HISTORY DATA DISPLAY
1/1
SIMULATION NO.22-03
TEST
1/1
PPD2_N1
CPFD2_S2
MFT
TRAY3
PPD2_N1
CPFD2_S2
APPD3_S
DPFD2_S4
LCC
PPD2_PRI
CPID2_S2
CPID2_S2
CPFD1_N1
PPD2_PRI
TRAY3
APPD3_S
TRAY2
MFT
MX-2300/2700 N/G SIMULATION 7 – 21
22-4
Purpose
Adjustment/Setup/Operation data check
Function (Purpose) Used to check the trouble (self diag) his-
tory.
Section
—
Item
Trouble
Operation/Procedure
The trouble history is displayed.
The trouble history is displayed sequentially from the latest one.
The max. 30 items can be stored. (The oldest one is deleted
sequentially.)
Press [COLOR] or [BLACK] button to print.
* Trouble code list: Refer to "2. Trouble code list" in the "[8] SELF
The trouble history is displayed.
The trouble history is displayed sequentially from the latest one.
The max. 30 items can be stored. (The oldest one is deleted
sequentially.)
Press [COLOR] or [BLACK] button to print.
* Trouble code list: Refer to "2. Trouble code list" in the "[8] SELF
DIAG AND TROUBLE CODE".
22-5
Purpose
Others
Function (Purpose) Used to check the ROM version of each
unit (section).
Section
—
Item
Software
Operation/Procedure
The ROM version can be checked with [
The ROM version can be checked with [
↑] [↓] buttons.
When there is any problem in the software, use this simulation to
check the ROM version of each section and revise the version if
necessary.
Press [COLOR] or [BLACK] button to print.
check the ROM version of each section and revise the version if
necessary.
Press [COLOR] or [BLACK] button to print.
22-6
Purpose
Adjustment/Setup/Operation data check
Function (Purpose) Used to output the list of the setting and
adjustment data (simulations, FAX soft
switch, counters).
switch, counters).
Section
—
Item
Data (Setting, adjustment data)
Operation/Procedure
* When installing or servicing, this simulation is executed to print
* When installing or servicing, this simulation is executed to print
the adjustment data and set data for use in the next servicing.
(Memory trouble, PWB replacement, etc.)
(Memory trouble, PWB replacement, etc.)
1)
Select the print mode with 10-key.
2)
Press [EXECUTE] button.
The list print selected in step 1) is started.
* When [C] key, [CA] key, [SYSTEM SETTINGS] key, or [EXE-
The list print selected in step 1) is started.
* When [C] key, [CA] key, [SYSTEM SETTINGS] key, or [EXE-
CUTE] button is pressed during printing, the operation is ter-
minated.
minated.
22-8
Purpose
Adjustment/Setup/Operation data check
Function (Purpose) Used to check the number of use of the fin-
isher, the RSPF, and the scan (reading)
unit.
unit.
Section
—
Item
Counter
Operation/Procedure
The values of the finisher counter, the RSPF counter, and the scan-
ner (read) related counters are displayed.
Press [COLOR] or [BLACK] button to print.
The values of the finisher counter, the RSPF counter, and the scan-
ner (read) related counters are displayed.
Press [COLOR] or [BLACK] button to print.
S/N
Serial No.
ICU(MAIN)
ICU (Main section)
ICU(BOOT)
ICU (Boot section)
LANGUAGE
Language support data version
GRAPHIC
Graphic data for LCD
IMG DATA ROM
ImageASIC FlashROM data
COLOR PROFILE
Color profile
PCU
PCU
SCU
SCU
SPF
SPF
FAX1(MAIN)
FAX1 line (Main section)
FAX2(MAIN)
FAX2 line (Main section)
DESK
Desk unit
LCC
Side LCC
FINISHER
Finisher
SADDLE
Saddle unit
PUNCH
Punch unit
NIC
NIC
POWER-CON
Power controller
E-MANUAL
Operation manual (HDD storage)
0
CLOSE
TROUBLE CODE DATA DISPLAY
SIMULATION NO.22-04
TEST
1/2
E7-23
F9-20
F2-39
L4-31
F1-50
L4-02
F2-39
F1-50
F1-50
L4-02
F1-61
F1-50
F1-50
F2-39
H5-01
E7-23
U5-12
F2-39
L1-00
E7-23
Item
Display item &
detail display
Description
Set
range
Default
value
A
DATA PATTERN
Data pattern selection
1: List print
2: List print (Sim50-24)
1: List print
2: List print (Sim50-24)
1 to 2
1
RSPF/DSPF
Document feed quantity
SCAN
Number of scan
STAPLER
Staple counter
PUNCHER
Puncher counter
STAMP
Stamp counter
SADDLE STAPLER
Saddle staple counter
OC_OPEN
OC open/close counter
RSPF/DSPF_OPEN
RSPF/DSPF open/close counter
OC LAMP_TIME
Total lighting time of the lamp in OC section
SIMULATION NO.22-05
S/N : **********
TEST
CLOSE
0
ICU(MAIN)
: 00.00.00
ICU(BOOT)
: 00.00.00
LANGUAGE
: 00.00.00
GRAPHIC
: 00.00.00
IMG DATA ROM : 00.00.00
COLOR PROFILE : 00.00.00
PCU
: 00.00.00
SCU
: 00.00.00
SPF
: NONE
FAX1(MAIN)
: NONE
1/2
0
A:
A: 1
; DATA PATTERN
SIMULATION NO.22-06
DATA PRINT MODE
1
[ 1~ 2 ]
OK
TEST
EXECUTE
CLOSE
.jpg "View file")
