DOWNLOAD Sharp AR-M620 (serv.man161) Service Manual ↓ Size: 339.86 KB | Pages: 8 in PDF or view online for FREE

Model
AR-M620 (serv.man161)
Pages
8
Size
339.86 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / 031-Measures against misfeeding at POD1_N, due to breaking chipping of the upper fuser pawls and the drum pick off pawls.
File
ar-m620-sm161.pdf
Date

Sharp AR-M620 (serv.man161) Service Manual / Technical Bulletin ▷ View online

Sharp Electronics (UK) Ltd., Technical Services Group
ARE722
2-2. The form of the separator pawl shaft cap has been changed to a separator pawl
shaft pick, at the same time the shape of the separator pawl solenoid fixing plate has
been changed to allow an improved movement of the drum separator pawl.
Please refer to the improvement procedure for the process unit.
Action, running changes from March 2004 production.
Improvement procedure for process unit.
1.  Remove the screw that fixes the process transport pass cover and remove the cover
by sliding it to the rear side.
Sharp Electronics (UK) Ltd., Technical Services Group
ARE722
2.  Remove the connector of the separator pawl solenoid, and remove the two screws
that fix the process harness guide. (rear side)
3.  Remove the screw that fixes the separator pawl arm, once the screw has been
removed remove the separator pawl arm and the separator pawl solenoid. Replace
the separator pawl solenoid fixing plate of the separator pawl solenoid.
4.  Remove the separator pawl solenoid return spring.
5.  Remove the separator pawl shaft.
Sharp Electronics (UK) Ltd., Technical Services Group
ARE722
5-1.  Pull out the separator pawl shaft from the hole of the process unit by sliding it to the
rear side, and pull away from the separator pawl shaft earth spring at the same time.
5-2.  Pull out the separator pawl shaft from the hole of the process unit by sliding it to the
front side.
6.  All four of the e type rings and SP pins of the separator pawl shaft are removed, once
removed replace the separator pawl shaft cap with the new separator pawl shaft pick.
6-1.  Remove the e type rings, separator pawl shaft caps and pins, this process is
repeated four times.
7. 
After inserting the SP pin until it ends protrudes to the one side, the separator pawl
shaft pick can be inserted, this process is repeated four times.
Sharp Electronics (UK) Ltd., Technical Services Group
ARE722
8.  Insert the separator pawl shaft in the reverse order, note that the separator pawl shaft
pick is to fitted face up.
9.  Remove the screw of the separator pawl waver bearing B and slide the separator
pawl waver bearing B to the front side.
 
10.  When the separator pawl waver bearing B has slid to the front face the separator
pawl shaft pick downwards.  Be sure to insert the boss portion of the separator pawl
pick to the in side of the separator pawl holder.
11.  Restore the separator pawl waver bearing B as before and secure with screw.
12. Assemble by following the procedure from No.1- No. 4 in reverse order.
Page of 8
Display

Sharp AR-M620 (serv.man161) Service Manual / Technical Bulletin ▷ Download