AR-M35, AR-M450 (serv.man77). Updated ROM version — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
AR-M35 AR-M450 (serv.man77)
Pages
7
Size
279.85 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Updated ROM version
File
ar-m35-ar-m450-sm77.pdf
Date

View Sharp AR-M35 / AR-M450 (serv.man77) Technical Bulletin online

ARE370
Sharp Electronics (UK) Ltd., Technical Services Group
1.Model Name:
AR-P350/P450/M350/M450,
AR-P12,AR-M11/EF1
2.Description:
To improve the software, the ROM version was upgraded.
[Main upgrade]
(1) Added [LINE THICKNESS] to the Default settings of the printer condition settings
(2) Added [EXTRA PRINT MODE] to the Default settings of the printer condition settings
(3) Added [DISABLING OF BYPASS PRINTING] to key operator programs
(4) Beep setting
(5) Modified the Initial resolution setting screen of the Operation settings for fax/image
transmission (for the network scanner setting)
(6) Modified the default file format setting for fax/image transmission (for the network
scanner setting)
(7) 180-Degree image rotation with custom-size paper
(8) Changed the OUTPUTTRAY SETTINGS of INITIAL STATUS SETTINGS for copy
mode
(9) Changed the process when exceeding staple capacity for saddle stitching
(10) The image location in the self-printing 70 for the simulation and the dialog mode
was improved. (Except AR-P350/P450,)
(11) If the amount of paper exceeds the capacity before printing in saddle stitch B
mode, the job stops.
(12) If the job was stopped/resumed after several copies in simplex/staple mode, the
machine stopped because the machine understood the stapler was full. This was
corrected.
(13) ”7: 100K” was added for a value of Sim21-1 Maintenance Cycle setting.
(14) Control level on outside counter when double-counted in duplex printing mode
was improved. (Except AR-P350/P450,)
New ROM Version]
Model Name
AR-P350/P450   AR-P12
Main
PCU
ROM Control
No.G00
VeA.08
V7.02
Model Name
AR-M350/M450   AR-M11/EF1
Main
Boot
PCU
Scanner
ROM Control
No.G00
VmA.08
Vm4.00
V7.02
V05.06
3.Action:
Starting with March 2002 production (except products for sale in China).
UPDATED ROM VERSION
TECHNICAL BULLETIN
Date:
22 May 2002
Model: ARM350/450
Ref.:
031
Colour: White
Page:
1 of 7
ARE370
Sharp Electronics (UK) Ltd., Technical Services Group
ARE370
Sharp Electronics (UK) Ltd., Technical Services Group
ARE370
Sharp Electronics (UK) Ltd., Technical Services Group
[Details on upgraded user interface]
1. Line Thickness  
This function is used to adjust the line thickness of the vector graphics for printing.
Note) Normally, there is no need to change the line thickness because it is defined by the
printer core.
However, this function would be useful for CAD or other particular purposes where
adjusting the line thickness is required.
The list below shows the relationship between the setting value and the enlargement ratio
of line thickness.
For example, when the Line Thickness is set to “4”, the thickness of the printed line will be
0.95 times as thick as the standard thickness defined by the printer core. When the
setting is 9, the result will be 1.5 times as thick as the standard thickness, and so forth. It
should be noted that each line will be printed as “1 dot line” when it is set to 0.
Setting
0
1
2
3
4
5
6
7
8
9
Enlargement ratio
All 1dot
0.5
0.75
0.9
0.95
1
1.05
1.10
1.25
1.5
ARE370
Sharp Electronics (UK) Ltd., Technical Services Group
*Operation via MFP operation panel
(1) Press the [PRINTER] key on the operation panel to access the printer mode screen.
(2) Press [CONDITION SETTINGS] on the printer mode screen to access the printer
operation condition settings screen.
(3) Press [DEFAULT SETTINGS] on the condition settings screen to access the default
settings screen.
(4) Press [LINE THICKNESS] on the second page of the default settings screen to access
the line thickness setting screen.
(5) Press the [UP]/[DOWN] key to select the setting you want, and then press [OK].
*Operation via printer engine
(1) Press [Menu], select [SET CONDITION SETTINGS], and then press [OK].
(2) Press [DEFAULT SETTINGS], and then [OK].
(3) Select [LINE THICKNESS] by pressing the [UP]/[DOWN] key, and then press [OK].
(4) Press the [UP]/[DOWN] key to select the setting you want, and then press [OK].
2. Extra Print Mode
*This function is used to improve the printing efficiency for continuously sent jobs in the
same format when printing out documents from a user application.
Note) When outputting normal office documents, the print job contains multiple pages,
therefore there is no need to set this function.
With the printout system on current Tiger series, the engine does not start processing the
next print job until it completely outputs the pages for the current print job. In a printing
environment where most of the print jobs contain a single page, this system decreases
the printing efficiency because it can cause an increased number of pauses between print
jobs.
*This function is used to reduce the waiting time between print jobs to increase printing
efficiency by recognizing some jobs as a series of print jobs.
*The print job name to which this mode is applied is changed to [CONTINUOUS PRINT]
to be displayed on the status screen.
*Operation specifications
Factory Default setting: OFF (MFP: The check box is not checked/ Printer: OFF)
*Operation via MFP operation panel
(1) Press the [PRINTER] key on the operation panel to access the printer mode screen.
(2) Press [CONDITION SETTINGS] on the printer mode screen to access the condition
settings screen for the printer.
(3) Press [DEFAULT SETTINGS] on the condition settings screen to access the default
settings screen.
(4) Check the [EXTRA PRINT MODE] check box on the second page of the default
settings screen.
*Operation via printer engine
(1) Press [Menu], select [SET CONDITION SETTINGS], and then press [OK].
(2) Press [DEFAULT SETTINGS], and then [OK].
(3) Select [EXTRA PRINT MODE] by pressing the [UP]/[DOWN] key, and then press [OK].
(4) Press the [UP]/[DOWN] key to select ON, and then press [OK].
*The following conditions must be met to start the extra print mode.
(1) There must be a 3 sec. + pause between jobs.
(2) In duplex mode, the document must end with an odd numbered page.
*Limitations
(1) Under any of the following conditions the EXTRA PRINT MODE does not work.
The EXTRA PRINT MODE does not work with the auditing mode on.
The EXTRA PRINT MODE does not work when 2+ copies are set via the printer driver.

Download Sharp AR-M35 / AR-M450 (serv.man77) Technical Bulletin

Here you can view online or download Sharp AR-M35 / AR-M450 (serv.man77) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp AR-M35 / AR-M450 (serv.man77) Copying Equipment. Information contained in Sharp AR-M35 / AR-M450 (serv.man77) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).