Sharp AR-M165-207 (serv.man20) User Manual / Operation Manual ▷ View online
23
SETUP IN A WINDOWS ENVIRONMENT
2
17
Configure the settings and then click
the [Update] button.
the [Update] button.
Be sure to ask your network administrator for the
correct IP address, subnet mask, and default
gateway to be entered.
correct IP address, subnet mask, and default
gateway to be entered.
18
Your changes to the settings appear.
Make sure that the changes are
correct and then click the [OK] button.
Make sure that the changes are
correct and then click the [OK] button.
19
Restart the machine.
Power off the machine and then power it back on.
20
Select [Search] from the [File] menu.
The IP address that you entered will appear.
Make sure that it is correct.
Make sure that it is correct.
This completes the procedure for setting the IP
address.
address.
Pegasus-E_Setup_Eng.book 23 ページ ２００４年８月１９日 木曜日 午後３時４６分
24
INSTALLING THE SOFTWARE
INSTALLING THE PRINTER DRIVER (STANDARD
INSTALLATION)
INSTALLATION)
1
Insert the network expansion kit
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
2
Click the [start] button, click [My
Computer] (
Computer] (
), and then double-click
the [CD-ROM] icon (
).
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer] and then double-click the
[CD-ROM] icon.
[My Computer] and then double-click the
[CD-ROM] icon.
3
Double-click the [Setup] icon (
).
4
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
5
Read the message in the "Welcome"
window and then click the [Next]
button.
window and then click the [Next]
button.
6
Click the [Printer Driver] button.
To view information on the software, click the
[Display Readme] button.
[Display Readme] button.
• If you wish to install the printer status monitor,
click the [Printer Status Monitor] button in this
window and follow the on-screen instructions.
window and follow the on-screen instructions.
• If you wish to install the printer administration
utility, click the [Administrator Tools] button in
this window and then click the [Printer
Administration Utility] button and follow the
on-screen instructions.
this window and then click the [Printer
Administration Utility] button and follow the
on-screen instructions.
7
Click the [Next] button.
8
Click the [Standard installation]
button.
button.
If you wish to install the display font or specify the machine's IP address by direct entry when installing the printer
driver, select [Custom installation]. (Page 26)
driver, select [Custom installation]. (Page 26)
To use the machine as a network printer in Windows NT 4.0, "TCP/IP Protocol" must be installed on your
computer. If this is not installed, see Windows NT 4.0 Help to install them.
computer. If this is not installed, see Windows NT 4.0 Help to install them.
Note
Caution
If the language selection screen appears
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
Note
Chapter02.fm 24 ページ ２００４年１１月２６日 金曜日 午後３時１８分
25
SETUP IN A WINDOWS ENVIRONMENT
2
9
Printers connected to the network are
detected. Select the machine and click
the [Next] button.
detected. Select the machine and click
the [Next] button.
10
A confirmation window will appear.
Check the contents and then click the
[Next] button.
Check the contents and then click the
[Next] button.
11
When the printer driver selection
window appears, select the printer
driver to be installed and click the
[Next] button.
window appears, select the printer
driver to be installed and click the
[Next] button.
Select the checkboxes of the printer drivers to be
installed.
installed.
12
Select whether or not you wish the
printer to be your default printer and
click the [Next] button.
printer to be your default printer and
click the [Next] button.
If you are installing multiple printer drivers, select
the printer that you wish to use as your default
printer.
If you do not wish to set either printer driver as
the default printer, select [No].
the printer that you wish to use as your default
printer.
If you do not wish to set either printer driver as
the default printer, select [No].
13
Check the contents of the window and
click the [Next] button.
click the [Next] button.
Installation of the printer driver begins.
14
When "The installation of the SHARP
software is complete" appears, click
the [OK] button.
software is complete" appears, click
the [OK] button.
15
Click the [Close] button.
This completes the installation of the software.
After installation, see "CONFIGURING THE PRINTER
DRIVER" (page 42) to check the printer driver settings.
After installation, see "CONFIGURING THE PRINTER
DRIVER" (page 42) to check the printer driver settings.
If the machine is not found, make sure that
the machine is powered on and that the
machine and your computer are connected
to the network, and then search again. If the
machine is still not found, use the custom
installation procedure to directly specify the
IP address. (Page 26)
the machine is powered on and that the
machine and your computer are connected
to the network, and then search again. If the
machine is still not found, use the custom
installation procedure to directly specify the
IP address. (Page 26)
To use the PS printer driver, the PS3
expansion kit must be installed.
expansion kit must be installed.
Note
Note
If you are using Windows 2000/XP/Server
2003
2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
If you installed the PS printer driver, the PS
display font can be installed from the
"PRINTER UTILITIES" CD-ROM that
accompanies the PS3 expansion kit. (Page
30)
display font can be installed from the
"PRINTER UTILITIES" CD-ROM that
accompanies the PS3 expansion kit. (Page
30)
Caution
Note
Note
Pegasus-E_Setup_Eng.book 25 ページ ２００４年８月１９日 木曜日 午後３時４６分
26
SETUP IN A WINDOWS ENVIRONMENT
CUSTOM INSTALLATION
If you wish to install the display font or specify the machine's IP address by direct entry when installing the printer
driver, select [Custom installation].
driver, select [Custom installation].
1
Insert the network expansion kit
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
2
Click the [start] button, click [My
Computer] (
Computer] (
), and then double-click
the [CD-ROM] icon (
).
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer] and then double-click the
[CD-ROM] icon.
[My Computer] and then double-click the
[CD-ROM] icon.
3
Double-click the [Setup] icon (
).
4
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
5
Read the message in the "Welcome"
window and then click the [Next]
button.
window and then click the [Next]
button.
6
Click the [Printer Driver] button.
To view information on the software, click the
[Display Readme] button.
[Display Readme] button.
• If you wish to install the printer status monitor,
click the [Printer Status Monitor] button in this
window and follow the on-screen instructions.
window and follow the on-screen instructions.
• If you wish to install the printer administration
utility, click the [Administrator Tools] button in
this window and then click the [Printer
Administration Utility] button and follow the
on-screen instructions.
this window and then click the [Printer
Administration Utility] button and follow the
on-screen instructions.
7
Click the [Next] button.
8
Click the [Custom installation] button.
9
Select [LPR Direct Print] and click the
[Next] button.
[Next] button.
10
Printers connected to the network are
detected. Select the machine and click
the [Next] button.
detected. Select the machine and click
the [Next] button.
If you wish to directly specify the IP address, click
the [Specify Address] button, enter the IP
address, and click the [Search] button.
the [Specify Address] button, enter the IP
address, and click the [Search] button.
If the language selection screen appears
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
Note
Chapter02.fm 26 ページ ２００４年９月１日 水曜日 午後４時３２分
Click on the first or last page to see other AR-M165-207 (serv.man20) service manuals if exist.