Sharp AR-M165-207 (serv.man20) User Manual / Operation Manual ▷ View online
11
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
1
10
The files required for installation of
the MFP driver are copied (if "MFP
Driver" was selected in Step 8).
the MFP driver are copied (if "MFP
Driver" was selected in Step 8).
Follow the on-screen instructions.
When you are asked how the printer is
connected, select [Connected to this computer]
and click the [Next] button.
When you are asked how the printer is
connected, select [Connected to this computer]
and click the [Next] button.
When "The installation of the SHARP software is
complete" appears, click the [OK] button.
complete" appears, click the [OK] button.
11
If you wish to install Button Manager
or Sharpdesk, click the [Utility
Software] button in step 8.
or Sharpdesk, click the [Utility
Software] button in step 8.
12
Click the [Button Manager] or
[Sharpdesk] button.
[Sharpdesk] button.
To view information on the software, click the
[Display Readme] button.
Follow the on-screen instructions.
[Display Readme] button.
Follow the on-screen instructions.
13
Click the [Close] button.
14
Connect the machine to your
computer with the interface cable.
(Page 44)
computer with the interface cable.
(Page 44)
• If you are using a USB cable, make sure the
machine power is turned on and then connect
the cable.
the cable.
• If you are using a parallel cable, turn off both the
machine power and the computer power and then
connect the cable. Turn the machine power on
first and then turn on your computer. The machine
is found and a plug and play window appears. If
you are using a parallel cable, go to step 16.
connect the cable. Turn the machine power on
first and then turn on your computer. The machine
is found and a plug and play window appears. If
you are using a parallel cable, go to step 16.
15
Installation of the scanner driver
begins. (only when using a USB cable).
begins. (only when using a USB cable).
"SHARP AR-XXXX" will appear in the "Found New
Hardware Wizard" dialog box. Select [Install the
software automatically (Recommended)], click the
[Next] button, and follow the on-screen instructions.
Hardware Wizard" dialog box. Select [Install the
software automatically (Recommended)], click the
[Next] button, and follow the on-screen instructions.
16
Installation of the printer driver
begins.
begins.
"SHARP AR-XXXX" will appear in the "Found New
Hardware Wizard" dialog box. Select [Install the
software automatically (Recommended)], click the
[Next] button, and follow the on-screen instructions.
Hardware Wizard" dialog box. Select [Install the
software automatically (Recommended)], click the
[Next] button, and follow the on-screen instructions.
This completes the installation.
• If you installed the MFP Driver, see "CONFIGURING
THE PRINTER DRIVER" (page 42) to configure the
printer driver settings.
printer driver settings.
• If you installed Button Manager, see "SETTING UP
BUTTON MANAGER" (page 18) to set up Button
Manager.
Manager.
If a warning message regarding the
Windows logo test appears while the MFP
driver files are being copied (the warning
message may appear several times), be
sure to click the [Continue Anyway] button.
Windows logo test appears while the MFP
driver files are being copied (the warning
message may appear several times), be
sure to click the [Continue Anyway] button.
• If you are using a parallel cable, do not
select "Button Manager". This feature is
not supported when a parallel cable is
used.
not supported when a parallel cable is
used.
• When a message appears prompting you
to connect the USB cable, click the [OK]
button. For the software that can be
installed, see "INSTALLATION
ENVIRONMENT AND USEABLE
SOFTWARE" (page 7).
button. For the software that can be
installed, see "INSTALLATION
ENVIRONMENT AND USEABLE
SOFTWARE" (page 7).
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
Caution
Note
Note
If the following message appears on
your computer screen, close it.
your computer screen, close it.
• A window regarding "HI-SPEED USB
Device" will then appear. Close the window.
• This message appears when the machine's
USB mode is not set to "Hi-Speed" mode.
For information on switching the USB 2.0
mode, see the "Key operator's guide".
For information on switching the USB 2.0
mode, see the "Key operator's guide".
If a warning window appears regarding the
"Windows logo test", be sure to click the
[Continue Anyway] button.
"Windows logo test", be sure to click the
[Continue Anyway] button.
If a warning window appears regarding the
"Windows logo test", be sure to click the
[Continue Anyway] button.
"Windows logo test", be sure to click the
[Continue Anyway] button.
If the dual function board is installed, the
"AR-XXXX (EB)" printer driver and scanner
driver will be installed.
"AR-XXXX (EB)" printer driver and scanner
driver will be installed.
Caution
Caution
Caution
Note
Chapter01.fm 11 ページ 2004年9月1日 水曜日 午後4時31分
12
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
INSTALLATION METHOD 3
Use this procedure to install the software in the following environments:
1. The printer is connected by USB cable.
2. Windows version: Windows 98/Windows Me/Windows 2000*
2. Windows version: Windows 98/Windows Me/Windows 2000*
1
Make sure that the USB cable is not
connected to the machine.
connected to the machine.
If the cable is connected, a Plug and Play window
will appear. If this happens, click the [Cancel]
button to close the window and disconnect the
cable.
will appear. If this happens, click the [Cancel]
button to close the window and disconnect the
cable.
2
Insert the "Software CD-ROM (1)" that
accompanies the machine into your
computer's CD-ROM drive.
accompanies the machine into your
computer's CD-ROM drive.
3
Double-click [My Computer] and then
double-click the [CD-ROM] icon.
double-click the [CD-ROM] icon.
4
Follow steps 4 through 7 in
"INSTALLATION METHOD 2".
"INSTALLATION METHOD 2".
5
If you wish to install the MFP driver,
click the [MFP Driver (Printer/Scanner)]
button.
click the [MFP Driver (Printer/Scanner)]
button.
To view information on the software, click the
[Display Readme] button.
[Display Readme] button.
6
Click the [Next] button.
7
The files required for installation of
the MFP driver are copied (if "MFP
Driver" was selected in Step 5).
the MFP driver are copied (if "MFP
Driver" was selected in Step 5).
Follow the on-screen instructions.
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
When the interface selection screen appears,
select [USB].
select [USB].
When "The MFP driver installation is complete."
appears, click the [OK] button.
appears, click the [OK] button.
* To install this software, you must have administrator's rights.
Note
The cable will be connected in step 11.
Note
If you are using Windows 2000
If you are using Windows 2000 and a
warning message regarding the digital
signature appears while the MFP driver files
are being copied (the warning message may
appear several times), be sure to click the
[Continue Anyway] button.
warning message regarding the digital
signature appears while the MFP driver files
are being copied (the warning message may
appear several times), be sure to click the
[Continue Anyway] button.
Caution
Pegasus-E_Setup_Eng.book 12 ページ 2004年8月19日 木曜日 午後3時46分
13
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
1
8
If you wish to install Button Manager
or Sharpdesk, click the [Utility
Software] button in step 5.
or Sharpdesk, click the [Utility
Software] button in step 5.
If you do not wish to install either, go to step 10.
9
Click the [Button Manager] or
[Sharpdesk] button.
[Sharpdesk] button.
• To view information on the software, click the
[Display Readme] button.
• Follow the on-screen instructions.
10
Click the [Close] button.
11
Connect the machine to your
computer with the USB cable. (Page
44)
computer with the USB cable. (Page
44)
Make sure that the machine is powered on. The
machine is found and a plug and play window
appears. Follow the on-screen instructions.
machine is found and a plug and play window
appears. Follow the on-screen instructions.
This completes the installation.
• If you installed the MFP Driver, see "CONFIGURING
THE PRINTER DRIVER" (page 42) to configure the
printer driver settings.
printer driver settings.
• If you installed Button Manager, see "SETTING UP
BUTTON MANAGER" (page 18) to set up Button
Manager.
Manager.
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
If you are using Windows 2000
If a warning message regarding the digital
signature appears, be sure to click the [Yes]
button.
signature appears, be sure to click the [Yes]
button.
If the dual function board is installed, the
"AR-XXXX (EB)" printer driver and scanner
driver will be installed.
"AR-XXXX (EB)" printer driver and scanner
driver will be installed.
Note
Caution
Note
Pegasus-E_Setup_Eng.book 13 ページ 2004年8月19日 木曜日 午後3時46分
14
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
INSTALLATION METHOD 4
Use this procedure to install the software in the following environments:
1.The printer is connected by parallel cable.
2.Windows version: Windows 95/Windows 98/Windows Me/Windows NT 4.0*/Windows 2000*
2.Windows version: Windows 95/Windows 98/Windows Me/Windows NT 4.0*/Windows 2000*
1
Make sure that the parallel cable is not
connected to the machine and your
computer before proceeding.
connected to the machine and your
computer before proceeding.
If the cable is connected, a Plug and Play window
will appear. If this happens, click the [Cancel]
button to close the window and disconnect the
cable.
will appear. If this happens, click the [Cancel]
button to close the window and disconnect the
cable.
2
Insert the "Software CD-ROM (1)" that
accompanies the machine into your
computer's CD-ROM drive.
accompanies the machine into your
computer's CD-ROM drive.
3
Double-click [My Computer] and then
double-click the [CD-ROM] icon.
double-click the [CD-ROM] icon.
4
Follow steps 4 through 7 in
"INSTALLATION METHOD 2".
"INSTALLATION METHOD 2".
5
If you wish to install the MFP driver,
click the [MFP Driver (Printer/Scanner)]
button.
click the [MFP Driver (Printer/Scanner)]
button.
To view information on the software, click the
[Display Readme] button.
[Display Readme] button.
6
Click the [Next] button.
7
Installation of the MFP driver (printer
driver) begins (if "MFP Driver" was
selected in Step 5).
driver) begins (if "MFP Driver" was
selected in Step 5).
Follow the on-screen instructions. If you are using
Windows 95/NT 4.0, go to step 10.
Windows 95/NT 4.0, go to step 10.
8
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
connected, select [Connected to this
computer] and click the [Next] button.
9
When the interface selection screen
appears, select [Parallel] and click the
[Next] button.
appears, select [Parallel] and click the
[Next] button.
* To install this software, you must have administrator's rights.
Note
The cable will be connected in step 17.
Note
Pegasus-E_Setup_Eng.book 14 ページ 2004年8月19日 木曜日 午後3時46分
Click on the first or last page to see other AR-M165-207 (serv.man20) service manuals if exist.