Sharp AR-M165-207 (serv.man20) User Manual / Operation Manual ▷ View online
27
SETUP IN A WINDOWS ENVIRONMENT
2
11
A confirmation window appears.
Check the contents and then click the
[Next] button.
Check the contents and then click the
[Next] button.
12
When the printer driver selection
window appears, select the printer
driver to be installed and click the
[Next] button.
window appears, select the printer
driver to be installed and click the
[Next] button.
Select the checkboxes of the printer drivers to be
installed.
installed.
13
Select whether or not you wish the
printer to be your default printer and
click the [Next] button.
printer to be your default printer and
click the [Next] button.
If you are installing multiple printer drivers, select
the printer that you wish to use as your default
printer.
If you do not wish to set either printer driver as
the default printer, select [No].
the printer that you wish to use as your default
printer.
If you do not wish to set either printer driver as
the default printer, select [No].
14
When the printer name window
appears, click the [Next] button.
appears, click the [Next] button.
If you wish to change the printer name, enter the
desired name.
desired name.
15
Select whether or not you wish to
install the display font and click the
[Next] button.
install the display font and click the
[Next] button.
16
Check the contents of the window and
click the [Next] button.
click the [Next] button.
Installation of the printer driver begins.
17
When "The installation of the SHARP
software is complete" appears, click
the [OK] button.
software is complete" appears, click
the [OK] button.
18
Click the [Close] button.
This completes the installation.
After the installation, see "CONFIGURING THE
PRINTER DRIVER" (page 42) to check the printer
driver settings.
After the installation, see "CONFIGURING THE
PRINTER DRIVER" (page 42) to check the printer
driver settings.
To use the PS printer driver, the PS3
expansion kit must be installed.
expansion kit must be installed.
Note
If you are using Windows 2000/XP/Server
2003
2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
If you installed the PS printer driver, the PS
display font can be installed from the
"PRINTER UTILITIES" CD-ROM that
accompanied the PS3 expansion kit. (Page
30)
display font can be installed from the
"PRINTER UTILITIES" CD-ROM that
accompanied the PS3 expansion kit. (Page
30)
Caution
Note
Note
Pegasus-E_Setup_Eng.book 27 ページ 2004年8月19日 木曜日 午後3時46分
28
SETUP IN A WINDOWS ENVIRONMENT
USING THE MACHINE AS A SHARED PRINTER VIA A
SERVER
SERVER
If the printer server in a Windows NT server environment, NetWare server environment, or other environment is
configured to share the printer (the machine), follow the steps below to install the printer driver in each client
computer.
Ask your network administrator for the server name and printer name of the machine on the network.
configured to share the printer (the machine), follow the steps below to install the printer driver in each client
computer.
Ask your network administrator for the server name and printer name of the machine on the network.
1
Insert the network expansion kit
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
2
Click the [start] button, click [My
Computer] (
Computer] (
), and then double-click
the [CD-ROM] icon (
).
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer] and then double-click the
[CD-ROM] icon.
[My Computer] and then double-click the
[CD-ROM] icon.
3
Double-click the [Setup] icon (
).
4
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
5
Read the message in the "Welcome"
window and then click the [Next]
button.
window and then click the [Next]
button.
6
Click the [Printer Driver] button.
To view information on the software, click the
[Display Readme] button.
[Display Readme] button.
• If you wish to install the printer status monitor,
click the [Printer Status Monitor] button in this
window and follow the on-screen instructions.
window and follow the on-screen instructions.
• If you wish to install the printer administration
utility, click the [Administrator Tools] button in
this window and then click the [Printer
Administration Utility] button and follow the
on-screen instructions.
this window and then click the [Printer
Administration Utility] button and follow the
on-screen instructions.
7
Click the [Next] button.
8
Click the [Custom installation] button.
For the procedures for configuring settings on the printer server, see "Operation Manual (for printer and
scanner)" on the "Software CD-ROM (1)" that accompanies the machine.
"Print server" as explained here is a computer that is directly connected to the machine, and a "Client" is any
other computer that is connected to the same network.
scanner)" on the "Software CD-ROM (1)" that accompanies the machine.
"Print server" as explained here is a computer that is directly connected to the machine, and a "Client" is any
other computer that is connected to the same network.
Note
If the language selection screen appears
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
Note
Pegasus-E_Setup_Eng.book 28 ページ 2004年8月19日 木曜日 午後3時46分
29
SETUP IN A WINDOWS ENVIRONMENT
2
9
Select [Shared Printer] and click the
[Next] button.
[Next] button.
10
For the port to be used, select the
machine (configured as a shared
printer), and click the [Next] button.
machine (configured as a shared
printer), and click the [Next] button.
You can also click the [Add Network Port] button
and select the printer to be shared (the machine)
by browsing the network in the window that
appears.
and select the printer to be shared (the machine)
by browsing the network in the window that
appears.
11
When the model selection window
appears, select model name of your
machine and click the [Next] button.
appears, select model name of your
machine and click the [Next] button.
12
When the printer driver selection
window appears, select the printer
driver to be installed and click the
[Next] button.
window appears, select the printer
driver to be installed and click the
[Next] button.
Be sure to select the same printer driver as that
of the shared printer (the machine).
of the shared printer (the machine).
13
Follow the on-screen instructions.
This completes the installation.
After installation, see "CONFIGURING THE PRINTER
DRIVER" (page 42) to check the printer driver settings.
After installation, see "CONFIGURING THE PRINTER
DRIVER" (page 42) to check the printer driver settings.
If the shared printer does not appear in the
list, check the settings on the printer server.
list, check the settings on the printer server.
Note
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
If you installed the PS printer driver, the PS
display font can be installed from the
"PRINTER UTILITIES" CD-ROM that
accompanied the PS3 expansion kit. (Page
30)
display font can be installed from the
"PRINTER UTILITIES" CD-ROM that
accompanied the PS3 expansion kit. (Page
30)
Note
Note
Pegasus-E_Setup_Eng.book 29 ページ 2004年8月19日 木曜日 午後3時46分
30
SETUP IN A WINDOWS ENVIRONMENT
INSTALLING THE PS DISPLAY FONTS
The fonts used by the PS printer driver are contained in the "PRINTER UTILITIES" CD-ROM that accompanied the
PS3 expansion kit (AR-PK1/N). Install these fonts as needed for the PS printer driver.
PS3 expansion kit (AR-PK1/N). Install these fonts as needed for the PS printer driver.
1
Insert the PS3 expansion kit
(AR-PK1/N) "PRINTER UTILITIES"
CD-ROM into your computer's
CD-ROM drive.
(AR-PK1/N) "PRINTER UTILITIES"
CD-ROM into your computer's
CD-ROM drive.
If your computer is configured for CD-ROM auto
start, the installation window appears. Go to step
4.
start, the installation window appears. Go to step
4.
2
Click the [start] button, click [My
Computer] (
Computer] (
), and then double-click
the [CD-ROM] icon (
).
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer] and then double-click the
[CD-ROM] icon.
[My Computer] and then double-click the
[CD-ROM] icon.
3
Double-click the [Setup] icon (
).
4
Select [PS Display Font] and click the
[Next] button.
[Next] button.
5
Follow the on-screen instructions.
If the language selection screen appears
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
after you double click the [Setup] icon,
select the language that you wish to use and
click the [Next] button. (Normally the correct
language is selected automatically.)
• Do not select [PS Printer Driver].
• The PS printer driver for the
• The PS printer driver for the
machine is installed from the
"Software CD-ROM (1)" that
accompanies the network
expansion kit (AR-NB3).
"Software CD-ROM (1)" that
accompanies the network
expansion kit (AR-NB3).
Note
Caution
Chapter02.fm 30 ページ 2004年9月1日 水曜日 午後4時32分
Click on the first or last page to see other AR-M165-207 (serv.man20) service manuals if exist.