Sharp PN-60TA3 (serv.man7) User Manual / Operation Manual ▷ View online
•
When using proxy server or HTTP1.1 is enabled in Internet Explorer settings, it may display
“Scanner is not displayed by auto search” or “It shows following error by manual search”.
“Scanner is not displayed by auto search” or “It shows following error by manual search”.
In this case follow below countermeasure.
[Countermeasure]
1. Add applicable MFP IP address to proxy exceptional list.
2. Enable HTTP1.1 check box in Internet Explorer settings.
1. Add applicable MFP IP address to proxy exceptional list.
2. Enable HTTP1.1 check box in Internet Explorer settings.
Add applicable MFP IP address to proxy exceptional list
1. Launch Internet Explorer; Select “Tools” “Internet Options”.
2. Select “Connections” tab “LAN settings”
2. Select “Connections” tab “LAN settings”
Network Scanner Tool Lite User’s Guide
9
3. Select Advanced button.
4. Enter MFP IP Address in [Not to use proxy for this address]
Network Scanner Tool Lite User’s Guide
10
Enable the check box of HTTP1.1
1. Launch Internet Explorer; Select “Tools” “Internet Options”.
2. Select “Advanced” tab.
3. Enable “Use HTTP1.1”.
2. Select “Advanced” tab.
3. Enable “Use HTTP1.1”.
Network Scanner Tool Lite User’s Guide
11
Technical Information
During the automated setup process, the Network Scanner Tool Lite determines the addressing
methods used by scanners and PCs using the following logic.
methods used by scanners and PCs using the following logic.
1. If the address of the scanner is in the DNS table, “Host Name” is used for the “Scanner
Setting”.
2. If the address of DNS server on the scanner web page is not blank, and the current PC is listed
in the DNS table, “Host Name” is used for the “PC Setting”.
Network Scanner Tool Lite User’s Guide
12
Click on the first or last page to see other PN-60TA3 (serv.man7) service manuals if exist.