Sharp VENTA HANDHELD (serv.man8) Service Manual ▷ View online
3. Before the system can be used configuration must be done. After selecting
Configuration the following is displayed. Ensure the cursor is focused on
the input box before entry.
the input box before entry.
Sharp Electronics (UK) Ltd – Paul Burton
20 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
4. The password is defaulted to nothing. However to ensure users cannot
access the configuration settings a password should be set. This will then
allow the configuration screen to accessed
allow the configuration screen to accessed
Under the Trading tab the following options are available
a. Top List Number – This sets the start-up screen of Venta
+
. This
screen is programmed in the normal way in Venta POS
b. Use Covers – These enables the entry of covers on Venta
+
c. Use Passwords – This allows the server passwords set on the POS
to be used on Venta
+
d. Table reopen after Send – This setting when not set returns the
unit to the table entry screen after order send. If set the unit
remains in the selection screen.
remains in the selection screen.
e. Allow Payments – This flag allows entry into the payment screen or
not
f. EXIT OS – Allows the application to be exited and the OS tobe
displayed
Sharp Electronics (UK) Ltd – Paul Burton
21 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Under the Device tab the following can be set
a. POS IP Address – This should be set to the IP address of the
Control POS that is being used to manage the Venta
+
Application on
the terminal being configured
b. Device ID Number – This is the number of the HHT device ALL HHT
devices on the system should be numbered differently
c. Proxy Till Number – This setting allows the HHT to carry the
settings of another POS Terminal on the system that is not the HHT
POS Control Terminal. This allows print Jobs to be made as if they
POS Control Terminal. This allows print Jobs to be made as if they
had taken place at that POS terminal set as the proxy. In a section
controlled restaurant the setting will allow receipts and bills to be
printed at a POS nearest to the section being serviced by the waiter
printed at a POS nearest to the section being serviced by the waiter
Sharp Electronics (UK) Ltd – Paul Burton
22 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Under the Registration tab Venta
+
can be registered
a. Registration Lock - This screen is used to register the Venta
+
Application for use. The application will function for 15 days from
installation with out the need for registration
installation with out the need for registration
IMPORTANT NOTE
Take a note of the Registration Keys for
each Handheld Device. If the battery is
discharged in the UPX200 the unit will
reset to factory defaults and Venta+
will have to be re-installed. The
Registration Key will have to be
re-entered
Sharp Electronics (UK) Ltd – Paul Burton
23 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Click on the first or last page to see other VENTA HANDHELD (serv.man8) service manuals if exist.