Sharp VENTA HANDHELD (serv.man8) Service Manual ▷ View online
Venta
+
Configuration 1
Master and Slave connected via RJ45 Hub/Switch and Wireless
Access Point
Sharp Electronics (UK) Ltd – Paul Burton
4 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Venta
+
Configuration 2
Master and Slave connected via Wireless to Wireless
Access Point
Sharp Electronics (UK) Ltd – Paul Burton
5 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
The diagrams shows a POS system connected to a Venta
+
waiter ordering
system, the number of HHT is determined using a number of factors :-
1. Environment – More than one access point (AP) maybe required if the
installation environment has many Wi-Fi restrictions. The system will
however operate under the standard Wi-Fi spec which allows 100m
indoors with no wireless restrictions such as thick walls or a high level
of reflective substances such as mirrors. The installing company will
of reflective substances such as mirrors. The installing company will
need to ensure this compatibility.
2. POS Resources – If only one POS is installed and the system relies on
it for receipt, Bill and Kitchen printing, it maybe be necessary to install
a secondary POS device to manage the printing if many HHTs are
a secondary POS device to manage the printing if many HHTs are
connected.
N.B It is possible with the system to install a number of HHT linked POS
terminals. For example in a multi floor building two systems can be adopted
terminals. For example in a multi floor building two systems can be adopted
by installing multiple access points or two systems one for the ground floor
and one for the first floor, this would also utilise the POS “Multi Master”
concept on Venta PRO.
concept on Venta PRO.
Sharp Electronics (UK) Ltd – Paul Burton
7 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Click on the first or last page to see other VENTA HANDHELD (serv.man8) service manuals if exist.