Sharp VENTA HANDHELD (serv.man8) Service Manual ▷ View online
3. Installation
Installation Basics
Before attempting to install as below a wireless access point should be
connected on the network to be used as shown in the configuration diagram.
connected on the network to be used as shown in the configuration diagram.
Many different types of access point are available in the market place and as
long as the one selected is Wi-Fi compatible and complies with IEEE 802.11b
long as the one selected is Wi-Fi compatible and complies with IEEE 802.11b
the system should work. DO NOT select an AP that complies ONLY with
802.11G or “Extreme G”
The access points that have been tested are :-
D-Link DWL-2000AP+
D-Link DWL-700AP
Appendix A shows the basic set-up required to make the AP connect. The
method of encryption should be determined by the installing company.
method of encryption should be determined by the installing company.
However it is recommended that 64bit encryption is used as a minimum this
is set on the AP and is compatible with the UPX200 40bit encryption which
requires a 10 digit code to be input at both the AP (which should be done
requires a 10 digit code to be input at both the AP (which should be done
first) and the UPX200. This will ensure only devices with this code can
communicate with each other.
communicate with each other.
Venta PRO V2 Installation
This system will only function using the Venta PRO V2 software. This must be
installed in accordance with the Venta PRO V2 installation procedure.
When Venta PRO V2 is installed the HHT system will work in a “unregistered”
condition, however if the system is registered it MUST be registered with the
Handheld option set. If the flag is not set the HHT system will not work.
Handheld option set. If the flag is not set the HHT system will not work.
Venta
+
will also need to be registered
Once Venta PRO POS is set-up NO other configuration is required, devices
attached will connect automatically.
Sharp Electronics (UK) Ltd – Paul Burton
8 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
4. UPX200 HHT Wireless Network Installation
1. Unpack the UPX200 and ensure it is fully charged. If the unit has been
used before please follow the instructions for UPX200 Resetting
2. Switch on the UPX200 using the green “On/Off” switch the following
screen will be displayed
3. Using Control Panel Date/Time to enter the current Date & Time. To avoid
errors please enter the “Time Zone” first followed by the Date & Time
Using the supplied stylus pen for ease double click the my computer Icon on
the desktop and select the windows folder the following screen will be
displayed
displayed
Sharp Electronics (UK) Ltd – Paul Burton
9 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
4. Double click the EVMON Icon and then close the Explorer window. After a
few moments an Icon will appear in the system tray at the bottom right
hand side of the screen as follows.
hand side of the screen as follows.
5. If this icon is pressed once the following is displayed, select “Find WLANs”
Sharp Electronics (UK) Ltd – Paul Burton
10 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
6. Selecting this will detect any Wireless LANs in the vicinity. Once this
process is complete the following will be displayed in this case a wireless
network called “default” is available. It is likely that this will be called
network called “default” is available. It is likely that this will be called
something different at each site, the most probable name would be that of
the site. This name is set on the “Access Point” when it is set-up.
the site. This name is set on the “Access Point” when it is set-up.
7. Select the wireless network that is required and then select “connect” the
following is displayed. The password is a security setting to disable non
password holders to change the wireless settings. If no password is
required press OK
required press OK
Sharp Electronics (UK) Ltd – Paul Burton
11 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Click on the first or last page to see other VENTA HANDHELD (serv.man8) service manuals if exist.