DOWNLOAD Sharp BD-HP21H (serv.man10) Service Manual ↓ Size: 7.48 MB | Pages: 48 in PDF or view online for FREE

r

Power supply

AC 100-240V, 50/60Hz

Power consumption (Normal)

26 W

Power consumption (Standby)

0.5 W (When “QUICK START” is set to “NO”)

Dimensions

Approx. 430 mm 

g 68 mm g 335 mm (W g H g D)

Weight

Approx. 4.0 kg

Operating temperature

5°C to 35°C

Storage temperature

–20°C to 55°C

Operating humidity

10 % to 80 % (no condensation)

TV systems

PAL system/NTSC system
(The system recorded on the disc is output.)

Playable discs

BD-ROM, BD-RE Dual Layer (BDMV format), BD-R Dual Layer (BDMV format), 
DVD Video, DVD+RW/+R/-RW/-R/-R Dual Layer (Video/VR format), 
Audio CD (CD-DA), CD-RW/R (CD-DA, JPEG file format)

HDMI

HDMI 19-pin standard connector (1080p 24Hz output)
HDMI™ (V.1.3 with x.v.Colour, Dolby TrueHD, DTS-HD Advanced Digital Out )

Component video output

Output level:
 

Y: 1 Vp-p (75 ohms)

 

P

B

/C

B

, P

R

/C

R

: 0.7 Vp-p (75 ohms)

Jacks: RCA jack

Video output

Output level: 1 Vp-p (75 ohms)
Jack: RCA-pin jack

Digital audio optical output

Terminal: Square Optical terminal

Audio output

Output level: 2 V rms (Output impedance: 1K ohms)
Jacks: RCA jack

USB input

USB 2.0 High Speed (480Mbit/s) correspondence (for Local storage/Software 
update)

Specifications are subject to change without notice.

BD-HP21H_en.indd   43

BD-HP21H_en.indd   43

2008/08/05   15:56:46

2008/08/05   15:56:46

BD-HP21H_en.indd   44

BD-HP21H_en.indd   44

2008/08/05   15:56:46

2008/08/05   15:56:46

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse 
need to be replaced, a BSI or ASTA approved BS 1362 fuse marked     or      and of the same rating as above, which is 
also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use 
the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with 
the plug supplied, cut-off the mains plug and fit an appropriate type.

Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the 
replacement, of this product subject to the conditions listed below:-

1. This guarantee shall only apply to faults which are due to inferior workmanship or 

materials. It does not cover faults or damage caused by accident, misuse, fair wear 
and tear, neglect, tampering with the product, or repair other than by a Service Facility 
appointed by Sharp. 

2. As this product is intended for private domestic use only, the guarantee will not apply if 

the product is used in the course of a business, trade or profession.

3. To benefi t from this guarantee, any fault which occurs must be notifi ed to Sharp, or its 

appointed Service Facility within one year from the date this product was purchased. 
Proof of purchase must be provided. 

4. The guarantee does not cover carriage costs. 

5. In the unlikely event of this product requiring repair, please contact the supplier from 

whom it was purchased. Where this is not possible, please contact the Sharp Customer 
Information Centre on the telephone number given below. 

6. No person has any authority to vary the terms or conditions of this guarantee. 

7. This guarantee is offered as an additional benefi t to your statutory rights, and does not 

affect these rights in any way. 

If you have any difficulty operating this product, or would like information on other Sharp 
products, 
please telephone the Sharp Customer Information Centre on the number given below. 

Sharp Customer Information Centre - Telephone 0845 880 0421 

(or (01) 676 0648 if telephoning from Ireland) 

0201

OPERATION MANUAL

Printed in Malaysia

TINSEA144WJQZ

08P08-MA-NG

Sharp Electronics (U.K.) Ltd.

4 Furzeground Way, Stockley Park, Uxbridge, Middlesex UB11 1EZ

SHARP CORPORATION