Panasonic KV-S5055C (serv.man2) Service Manual ▷ View online
61
5. Disconnect the connector to the SLIP DETECT SENSOR
Board.
Board.
6. Remove the screw on the SLIP DETECT SENSOR Board.
62
8.5.
Lower Block
8.5.1.
Right Cover (with Right Front Cover)
1. Remove the 2 screws on the right side of the scanner.
2. Push the ADF Door Release to open the ADF Door
3. Remove the screw (a) and screw (b).
4. While slightly flexing the rear of the Right Cover in the
direction of the arrow (1) and holding up the cover in the
direction of the arrow (2), pull the cover forward.
direction of the arrow (1) and holding up the cover in the
direction of the arrow (2), pull the cover forward.
63
5. Disconnect the connector from the PANEL Board to release
the Right Cover (with Right Front Cover) from the scanner.
the Right Cover (with Right Front Cover) from the scanner.
64
8.5.2.
Right Front Cover
8.5.3.
PANEL Board
1. Remove the Right Cover with Right Front Cover. (See 8.5.1.)
2. Remove the 3 screws to release the Right Front Cover from
the Right Cover.
the Right Cover.
1. Remove the Right Front Cover. (See 8.5.2.)
2. Remove the 4 screws to release the Panel Cover from the
Right Front Cover.
Right Front Cover.
3. Remove the 3 screws on the PANEL Board.
Click on the first or last page to see other KV-S5055C (serv.man2) service manuals if exist.