DOWNLOAD Panasonic KV-S5055C (serv.man2) Service Manual ↓ Size: 8.38 MB | Pages: 127 in PDF or view online for FREE

69

1. Remove the 2 screws on the left of the scanner.

2. Push the ADF Door Release to open the ADF Door.

3. Remove the screw.

4. While releasing the 3 claws, pull the Left Cover forward.

70

1. Remove the Left Cover. (See 8.5.9.)

2. Disconnect the 5 connectors.

3. Remove the 2 screws on the USR RELAY Board.

1. Remove the Left Cover. (See 8.5.9.)

2. Loosen the 2 screws. Push down the lever until the belt goes
    slack, and then tighten the screws to hold the lever in place.

3. Remove the Drive Belt.

a. Reattach the Drive Belt as shown in the following figure.
b. Loosen the 2 screws. (Loosening the 2 screws will make
    the belt tighten properly.)
c. Tighten the 2 screws.

71

1. Push the ADF Door Release to open the ADF Door.

2. Open and remove the Double-feed Prevention Cover.

3. While releasing the claw, remove the Double-feed Prevention
    Roller.

72

1. Remove the Double-feed Prevention Roller. (See 8.5.12.)

2. Remove the screw.

3. While releasing the 3 claws on the bottom of Hopper Plate
    Assembly and pushing down the top of the Gate, pull and
     remove the assembly forward.

   (1) While pull the Hopper Plate Assembly forward, release 
          the 3 claws (Claw1).
   (2) While pull the Hopper Plate Assembly upward, release
          the 2 claws (Claw2) to remove the assembly.

4. Remove the screw with a ground-lug and connector on the
    bottom of the assembly to release the assembly from the
    scanner.