Panasonic KV-S5055C (serv.man2) Service Manual ▷ View online
81
8.5.25. Reference Plate (F)
1. Remove the Light Unit (B). (See 8.5.24.)
2. Remove the 2 springs (1 from each side of the Reference
Plate (F)).
Plate (F)).
Disassembling Note: How to remove springs
Refer to 8.4.6.
3. Release the 2 poly-sliders on both sides that fasten the
Reference Plate (F) to the scanner.
Reference Plate (F) to the scanner.
4. Remove the Gear and poly-slider.
5. Slide and remove the plate.
Reassembling Note: How to attach the spring
Refer to 8.4.6.
82
8.5.26. Conveyor 1
8.5.27. Drive Roller 2
1. Remove the Left Cover. (See 8.5.9.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the screw with a washer on the right, as seen from
the back.
the back.
5. Remove the screw on the left, as seen from the back.
6. Remove the Conveyor 1.
1. Remove the Drive Belt. (See 8.5.11.)
2. Remove the Conveyor 1. (See 8.5.26.)
3. Pull out the Drive Roller 2 in the direction of the arrow.
83
8.5.28. Ionizer L and Ionizer R
8.5.29. Drive Roller 1
1. Remove the Drive Roller 2. (See 8.5.27.)
2. Remove the 2 screws (1 from each Ionizer).
3. Remove the 2 screws with ground-lugs (1 from each Ionizer).
4. Pull the Ionizer L and Ionizer R.
1. Remove the Left Cover. (See 8.5.9.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Drive Belt. (See 8.5.11.)
4. Remove the Hopper Plate Assembly. (See 8.5.13.)
5. Pull out the Drive Roller 1 in the direction of the arrow.
84
8.5.30. Conveyor 2
8.5.31. Drive Roller 3
1. Remove the Left Cover. (See 8.5.9.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the screw with a washer on the right, as seen from
the back.
the back.
5. Remove the screw on the left, as seen from the back.
6. Remove the Conveyor 2.
1. Remove the Conveyor 2. (See 8.5.30.)
2. Remove the Power Box. (See 8.5.6.)
3. Remove the Drive Belt. (See 8.5.11.)
4. Remove the spring, and then pull out the Drive Roller 3.
Click on the first or last page to see other KV-S5055C (serv.man2) service manuals if exist.