Panasonic KV-S5055C (serv.man2) Service Manual ▷ View online
73
8.5.14. Paper Sensor
8.5.15. USR SENSOR Board
1. Remove the Hopper Plate Assembly. (See 8.5.13.)
2. Remove the screw to release the Paper Sensor with plate from
the Hopper Plate Assembly.
the Hopper Plate Assembly.
3. Remove the screw to separate the sensor from the plate.
1. Remove the Hopper Plate Assembly. (See 8.5.13.)
2. Remove the screw, and then disconnect the connector.
74
8.5.16. DFP Pressure Motor
1. Remove the Left Cover. (See 8.5.9.)
2. Remove the Hopper Plate Assembly. (See 8.5.13.)
3. Remove the screw (a) and 4 screws (b) on the Reinforcement
Plate.
Plate.
4. Remove the screw (a) on the left side.
5. Pull upward and remove the Reinforcement Plate.
6. Remove the 4 screws, and then raise the DFP Pressure Motor
with plate.
with plate.
75
8.5.17. DFP HOME SENSOR Board
8.5.18. Inner Cover C
7. Disconnect the connector, and then remove the 2 screws to
release the motor from the plate.
release the motor from the plate.
1. Remove the DFP Pressure Motor. (See 8.5.16.)
2. Remove the screw, and then disconnect the connector of the
DFP HOME SENSOR Board.
DFP HOME SENSOR Board.
1. Remove the 2 screws that fasten the Inner Cover C to the
scanner.
scanner.
2. Push down the cover to remove it.
76
8.5.19. Discharge Brush
8.5.20. Conveyor Motor
1. Remove the Inner Cover C. (See 8.5.18.)
2. Remove the 2 screws that fasten the Discharge Brush.
1. Remove the Drive Belt. (See 8.5.11.)
2. Remove the Inner Cover C. (See 8.5.18.)
3. Remove the Inner Cover L.
4. Remove the 2 screws that fasten the Heatsink for Conveyor
Motor.
Motor.
5. Remove the 2 screws that fasten the Conveyor Motor in place.
Click on the first or last page to see other KV-S5055C (serv.man2) service manuals if exist.