JBL SB 300 (serv.man6) EMC - CB Certificate ▷ View online
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 25 of 97
E.U.T :
Powered soundbar with
powered woofer
powered woofer
Model Name :
SB300
Temperature :
25°C
Relative Humidity : 54 %
Pressure :
1010 hPa
Test Voltage :
AC 230V/50Hz
Test Mode :
Optical IN / CNTR, TianBao
Freq.
Terminal
Margin
(MHz)
L/N
QP-Mode
AV-Mode
QP-Mode
AV-Mode
(dB)
1.03
Line
42.62
*
56.00
46.00
-13.38
(QP)
1.66
Line
46.52
38.56
56.00
46.00
-7.44
(AV)
2.02
Line
45.92
34.17
56.00
46.00
-10.08
(QP)
2.45
Line
46.52
35.69
56.00
46.00
-9.48
(QP)
14.77
Line
54.32
36.92
60.00
50.00
-5.68
(QP)
24.58
Line
48.38
46.48
60.00
50.00
-3.52
(AV)
Measured(dBuV)
Limits(dBuV)
Note
Remark
:
:
(1) Reading in which marked as QP means measurements by using are Quasi-Peak Mode with
Detector BW=9KHz;SPA setting in RBW=10KHz,VBW =10KHz, Swp. Time = 0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
(2) All readings are QP Mode value unless otherwise stated AVG in column of『Note』. If the QP
Mode Measured value compliance with the QP Limits and lower than AVG Limits, the EUT
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
(3) Measuring frequency range from 150KHz to 30MHz。
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 26 of 97
E.U.T :
Powered soundbar with
powered woofer
powered woofer
Model Name :
SB300
Temperature :
25°C
Relative Humidity : 54 %
Pressure :
1010 hPa
Test Voltage :
AC 230V/50Hz
Test Mode :
Optical IN / CNTR, TianBao
Freq.
Terminal
Margin
(MHz)
L/N
QP-Mode
AV-Mode
QP-Mode
AV-Mode
(dB)
1.03
Neutral
44.51
33.17
56.00
46.00
-11.49
(QP)
1.58
Neutral
47.33
32.61
56.00
46.00
-8.67
(QP)
1.66
Neutral
47.59
33.14
56.00
46.00
-8.41
(QP)
2.30
Neutral
46.81
35.44
56.00
46.00
-9.19
(QP)
14.75
Neutral
53.01
32.96
60.00
50.00
-6.99
(QP)
24.58
Neutral
48.90
46.58
60.00
50.00
-3.42
(AV)
Measured(dBuV)
Limits(dBuV)
Note
Remark
:
:
(1) Reading in which marked as QP means measurements by using are Quasi-Peak Mode with
Detector BW=9KHz;SPA setting in RBW=10KHz,VBW =10KHz, Swp. Time = 0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
(2) All readings are QP Mode value unless otherwise stated AVG in column of『Note』. If the QP
Mode Measured value compliance with the QP Limits and lower than AVG Limits, the EUT
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
(3) Measuring frequency range from 150KHz to 30MHz。
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 27 of 97
E.U.T :
Powered soundbar with
powered woofer
powered woofer
Model Name :
SB300
Temperature :
25°C
Relative Humidity : 54 %
Pressure :
1010 hPa
Test Voltage :
AC 230V/50Hz
Test Mode :
Optical IN / CNTR, HanWei
Freq.
Terminal
Margin
(MHz)
L/N
QP-Mode
AV-Mode
QP-Mode
AV-Mode
(dB)
0.17
Line
59.82
37.15
65.16
55.16
-5.34
(QP)
0.20
Line
55.23
34.16
63.69
53.69
-8.46
(QP)
0.77
Line
43.04
*
56.00
46.00
-12.96
(QP)
1.53
Line
36.42
*
56.00
46.00
-19.58
(QP)
2.31
Line
36.36
*
56.00
46.00
-19.64
(QP)
27.65
Line
44.08
*
60.00
50.00
-15.92
(QP)
Measured(dBuV)
Limits(dBuV)
Note
Remark
:
:
(1) Reading in which marked as QP means measurements by using are Quasi-Peak Mode with
Detector BW=9KHz;SPA setting in RBW=10KHz,VBW =10KHz, Swp. Time = 0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
(2) All readings are QP Mode value unless otherwise stated AVG in column of『Note』. If the QP
Mode Measured value compliance with the QP Limits and lower than AVG Limits, the EUT
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
(3) Measuring frequency range from 150KHz to 30MHz。
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 28 of 97
E.U.T :
Powered soundbar with
powered woofer
powered woofer
Model Name :
SB300
Temperature :
25°C
Relative Humidity : 54 %
Pressure :
1010 hPa
Test Voltage :
AC 230V/50Hz
Test Mode :
Optical IN / CNTR, HanWei
Freq.
Terminal
Margin
(MHz)
L/N
QP-Mode
AV-Mode
QP-Mode
AV-Mode
(dB)
0.17
Neutral
59.78
36.75
65.16
55.16
-5.38
(QP)
0.20
Neutral
55.64
33.62
63.53
53.53
-7.89
(QP)
0.23
Neutral
51.38
32.43
62.31
52.31
-10.93
(QP)
0.77
Neutral
42.89
*
56.00
46.00
-13.11
(QP)
1.54
Neutral
34.73
*
56.00
46.00
-21.27
(QP)
24.58
Neutral
44.80
*
60.00
50.00
-15.20
(QP)
Measured(dBuV)
Limits(dBuV)
Note
Remark
:
:
(1) Reading in which marked as QP means measurements by using are Quasi-Peak Mode with
Detector BW=9KHz;SPA setting in RBW=10KHz,VBW =10KHz, Swp. Time = 0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
Reading in which marked as AV means measurements by using are Average Mode with
instrument setting in RBW=10KHz,VBW=10KHz, Swp. Time =0.3 sec./MHz。
(2) All readings are QP Mode value unless otherwise stated AVG in column of『Note』. If the QP
Mode Measured value compliance with the QP Limits and lower than AVG Limits, the EUT
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
shall be deemed to meet both QP & AVG Limits and then only QP Mode was measured,
but AVG Mode didn‘t perform。In this case, a “ * ” marked in AVG Mode column of
Interference Voltage Measured。
(3) Measuring frequency range from 150KHz to 30MHz。
Click on the first or last page to see other SB 300 (serv.man6) service manuals if exist.