JBL SB 300 (serv.man6) EMC - CB Certificate ▷ View online
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 2 of 97
Declaration
Neutron
represents to the client that testing is done in accordance with standard procedures as applicable
and that test instruments used has been calibrated with the standards traceable to National Measurement
Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A.
Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A.
Neutron
's reports apply only to the specific samples tested under conditions. It is manufacture’s
responsibility to ensure that additional production units of this model are manufactured with the identical
electrical and mechanical components. Neutron shall have no liability for any declarations, inferences or
generalizations drawn by the client or others from Neutron issued reports.
electrical and mechanical components. Neutron shall have no liability for any declarations, inferences or
generalizations drawn by the client or others from Neutron issued reports.
Neutron
’s reports must not be used by the client to claim product endorsement by the authorities or any
agency of the Government.
This report is the confidential property of the client. As a mutual protection to the clients, the public and
Neutron-self
Neutron-self
, extracts from the test report shall not be reproduced except in full with Neutron’s authorized
written approval.
Neutron
’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025
requirements, and accredited by the conformity assessment authorities listed in this test report.
Limitation
For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this
test report is (are) included in the conformity assessment authorities acceptance respective.
test report is (are) included in the conformity assessment authorities acceptance respective.
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 3 of 97
Table of Contents
Page
1. CERTIFICATION
6
2. SUMMARY OF TEST RESULTS
7
2.1 TEST FACILITY
8
2.2 MEASUREMENT UNCERTAINTY
8
3. GENERAL INFORMATION
9
3.1 GENERAL DESCRIPTION OF EUT
9
3.2 DESCRIPTION OF TEST MODES
10
3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED
12
3.4 DESCRIPTION OF SUPPORT UNITS
13
4. EMC EMISSION TEST
14
4.1 MAINS TERMINAL DISTURBANCE VOLTAGE MEASUREMENT
14
4.1.1 LIMITS OF DISTURBANCE VOLTAGE AT THE MAINS TERMINALS
14
4.1.2 MEASUREMENT INSTRUMENTS LIST
14
4.1.3 TEST PROCEDURE
15
4.1.4 DEVIATION FROM TEST STANDARD
15
4.1.5 TEST SETUP
15
4.1.6 BLOCK DIAGRAM OF TEST SETUP
16
4.1.7 EUT OPERATING CONDITIONS
16
4.1.8 TEST RESULTS
17
4.2 DISTURBANCE POWER MEASUREMENT
29
4.2.1 LIMITS OF DISTURBANCE POWER
29
4.2.2 MEASUREMENT INSTRUMENTS LIST
29
4.2.3 TEST PROCEDURE
29
4.2.4 DEVIATION FROM TEST STANDARD
30
4.2.5 TEST SETUP-CLAMP
30
4.2.6 BLOCK DIAGRAM OF TEST SETUP-CLAMP
30
4.2.7 EUT OPERATING CONDITIONS
30
4.2.8 TEST RESULTS
31
4.3 RADIATED DISTURBANCE MEASUREMENT
37
4.3.1 LIMITS OF RADIATED DISTURBANCE MEASUREMENT
37
4.3.2 MEASUREMENT INSTRUMENTS LIST
38
4.3.3 TEST PROCEDURE
39
4.3.4 DEVIATION FROM TEST STANDARD
39
4.3.5 TEST SETUP-SEMI-ANECHOIC CHAMBER
40
4.3.6 BLOCK DIAGRAM OF TEST SETUP-OS
40
Neutron Engineering Inc.
Report No.: NEI-EMC-1-1009C113 Page 4 of 97
Table of Contents
Page
4.3.7 EUT OPERATING CONDITIONS
40
4.3.8 TEST RESULTS
41
4.4 HARMONICS CURRENT MEASUREMENT
42
4.4.1 LIMITS OF HARMONICS CURRENT MEASUREMENT
42
4.4.2 MEASUREMENT INSTRUMENTS LIST
42
4.4.3 TEST PROCEDURE
43
4.4.4 DEVIATION FROM TEST STANDARD
43
4.4.5 TEST SETUP
43
4.4.6 EUT OPERATING CONDITIONS
43
4.4.7 TEST RESULTS
44
4.5 VOLTAGE FLUCTUATION AND FLICKS MEASUREMENT
56
4.5.1 LIMITS OF VOLTAGE FLUCTUATION AND FLICKSMEASUREMENT
56
4.5.2 MEASUREMENT INSTRUMENTS LIST
56
4.5.3 TEST PROCEDURE
56
4.5.4 DEVIATION FROM TEST STANDARD
56
4.5.5 TEST SETUP
57
4.5.6 EUT OPERATING CONDITIONS
57
4.5.7 TEST RESULTS
58
5. IMMUNITY TEST
62
5.1 GENERAL DESCRIPTION
62
5.2 GENERAL PERFORMANCE CRITERIA
63
5.3 TEST SETUP
63
5.4 IMMUNITY AGAINST RFI VOLTAGES (S2a)
64
5.4.1 TEST LIMIT
64
5.4.2 TEST INSTRUMENTS
65
5.4.3 TEST PROCEDURE
65
5.4.4 DEVIATION FROM TEST STANDARD
65
5.4.5 TEST SETUP
66
5.4.6 TEST RESULTS (Refer to ATTACHMENT A)
66
5.5 IMMUNITY AGAINST RFI RADIATED RFI (S3)
67
5.5.1 TEST LIMIT
67
5.5.2 TEST INSTRUMENTS
67
5.5.3 TEST PROCEDURE
67
5.5.4 DEVIATION FROM TEST STANDARD
67
5.5.5 TEST SETUP
68
5.5.6 TEST RESULTS (Refer to ATTACHMENT A)
68
5.6 IMMUNITY TO ELECTROMAGNETIC FIELDS KEYED CARRIER (S5)
69
5.6.1 TEST SPECIFICATION
69
5.6.2 TEST INSTRUMENTS
69