DOWNLOAD Sony DCR-TRV9 / DCR-TRV9E Service Manual ↓ Size: 34.67 MB | Pages: 127 in PDF or view online for FREE

5-54

Set the CB AD OUT level.

Mode

VTR stop

Signal

75% color bar (Video signal terminal
of AUDIO/VIDEO jack)

Measurement Point

DDS display of LCD or TV monitor

Measuring Instrument

(Note 1)

Adjustment Page

D

Adjustment Address

9D

Specified Value

4D to 4F (NTSC)
53 to 55 (PAL)

The two digits of the display data of the LCD and TV monitor is
the object data.

 HI XX XXXX

Object data

Use the 75% color bar signal shown in Fig. 5-3-17.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: D, address: 11, set data: 24, and press the PAUSE
button of the adjustment remote commander.

3)

Select page: 2, address: 96, and set data: 40.

4)

Select page: 2, address: 97, and set data: C0 (NTSC) or B0
(PAL).

5)

Select page: D, address: 9D, change the data and adjust the
DDS display data (Note 1) to the specified value.

6)

Press the PAUSE button of the adjustment remote commander.

Processing after Completing Adjustments:
1)

Select page: D, address: 11, set data: 00, and press the PAUSE
button of the adjustment remote commander.

2)

Select page: 0, address: 01, and set data: 00.

3)

Select page: 2, address: 96, and set data: 00.

4)

Select page: 2, address: 97, and set data: 00.

5-55

1)

Set the POWER switch to VTR (or PLAYER) position.

2)

Connect the adjustment remote commander and set the HOLD
switch to HOLD (SERVICE) position.

3)

Playback the BIST check tape. (XH5-6 (NTSC), XH5-6P
(PAL))

4)

Select page: 4, address: 11, and set data: 04, then press the
PAUSE button.

5)

Select page: 4, address: 11, and set data: 00, then press the
PAUSE button.

6)

Select page: 4, address: 13, and set data: 03, then press the
PAUSE button.
(The data will be automatically return to “00”.)

7)

When the IC1701 (D1) 

→

 IC1601 (U1) playback system is

normal, following data will be displayed in page: 4, address:
14 and 15.

8)

When the IC1701 (D1) 

→

 IC3501 (INDI) playback system is

normal, following data will be displayed in page: 4, address:
16 and 17.

9)

When the IC1701 (D1) 

→

 IC1901 (A1) playback system is

normal, following data will be displayed in page: 4, address:
18 and 19.

10) Select page: 4, address: 11, and set data: 10, then press the

PAUSE button.

11) Select page: 4, address: 11, and set data: 00, then press the

PAUSE button.

12) Select page: 4, address: 13, and set data: 04, then press the

PAUSE button.
(The data will be automatically return to “00”.)

13) When the IC1901 (A1) playback system is normal, following

data will be displayed in page: 4, address: 14 and 15.

14) Select page: 4, address: 11, and set data: 08, then press the

PAUSE button.

15) Select page: 4, address: 13, and set data: 07, then press the

PAUSE button.
(The data will be automatically return to “00”.)

16) Select page: 4, address: 11, and set data: 00, then press the

PAUSE button.

17) Perform “Recording System Check”.

4

4

15

14

E5 (NTSC), 27 (PAL)

11 (NTSC), CA (PAL)

4

4

17

16

C0 or BA (NTSC), DC (PAL)

6E or 04 (NTSC), 44 (PAL)

4

4

19

18

33 or B2 (NTSC), A2 (PAL)

59 or 19 (NTSC), 03 (PAL)

4

4

15

14

7B (NTSC), CC (PAL)

B5 (NTSC), C0 (PAL)

5-56

Perform “Playback System Check” before this check.

1)

Playback the BIST check tape.

2)

Input the following data in order.

Press the PAUSE button each time set the data.

3)

While keep the HOLD switch of the adjustment remote
commander at ON (SERVICE) position, eject the BIST check
tape and insert a tape for recording in place of the tape.

4)

Select page: 0, address: 01, and set data: 01.

5)

Only for AEP and UK model, select page: D, address: 14, after
memorizing the data, set the bit value of bit 0 to “1”, and then
press the PAUSE button. (Refer to “4-3, 3. Bit value
discrimination” of “5-4. Service Mode”).

6)

Select page: D, address: 15, after memorizing the data, set data:
07 and then press the PAUSE button.

7)

While keep the HOLD switch of the adjustment remote
commander at ON (SERVICE) position, set to the VTR
recording mode. (Use the wireless remote commander of 8mm
VCR, only for AEP and UK model.)

8)

Select page: 4, address: 11, and set data: 02, then press the
PAUSE button.

9)

Select page: 4, address: 13, and set data: 02, then press the
PAUSE button.

10) Select page: 4, address: 11, and set data: 00, then press the

PAUSE button.

11) Select page: 3, address: 01, and set data: 0D, then press the

PAUSE button.

12) Select page: 4, address: 1C, and set data: FF, then press the

PAUSE button.

13) Select page: 4, address: 11, and set data: 04, then press the

PAUSE button.

14) Select page: 4, address: 11, and set data: 00, then press the

PAUSE button.

15) Select page: 4, address: 13, and set data: 03, then press the

PAUSE button.
(The data will be automatically return to “00”.)

16) When the IC1601 (U1) 

→

 IC1701 (D1) recording system is

normal, following data will be displayed in page: 4, address:
14 and 15.

4

4

4

4

4

4

4

4

4

4

4

4

41

0F

0E

40

0F

40

40

0F

40

40

0F

40

01

02

01

01

0A

00

01

0E

00

01

8E

00

4

4

15

14

C6 (NTSC), F8 (PAL)

90 (NTSC), 3E (PAL)

17) When the IC1701 (D1) 

→

 IC3501 (INDI) recording system is

normal, following data will be displayed in page: 4, address:
16 and 17.

18) When the IC1901 (A1) 

→

 IC1701 (D1) recording system is

normal, following data will be displayed in page: 4, address:
18 and 19.

19) When the IC1701 (D1) 

→

 IC6101 (DX) recording system is

normal, following data will be displayed in page: 4, address:
1A and 1B.

20) Only for AEP and UK model, select page: D, address: 14, and

set the data memorized at step 5) .

21) Select page: D, address: 15, and set the data memorized at step

6).

22) Press the PAUSE button of the adjustment remote commander.
23) Select page: 0, address: 01, and set data: 00.

4

4

17

16

19 (NTSC), 2A (PAL)

AA (NTSC), AE (PAL)

4

4

19

18

76 (NTSC), CE (PAL)

B9 (NTSC), E7 (PAL)

4

4

1B

1A

98 (NTSC), DC (PAL)

E6 (NTSC), 85 (PAL)

5-57

Adjust using a IR receiver jig (J-6082-383-A).

Switch setting:
LASER LINK ................................................ ON (Red LED is lit)

Mode

Camera standby

Subject

Arbitrary

Measurement Point

Pin 5 of CN003 of IR receiver jig
(RF) (Or Pin !§ of IC8401)

Measuring Instrument

Frequency counter

Adjustment Page

D

Adjustment Address

90

Specified Value

f = 11.85 ± 0.05 MHz

Connection of Equipment
Connect the measuring device as shown in the following figure,
and adjust.

Fig. 5-3-18

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 2, address: 12, set data: 10, and press the PAUSE
button of the adjusting remote commander.

3)

Select page: D, address: 90, change the data, and set the video
carrier frequency (f) to the specified value.

4)

Press the PAUSE button of the adjusting remote commander.

5)

Select page: 2, address: 12, set data: 00, and press the PAUSE
button of the adjusting remote commander.

6)

Select page: 0, address: 01, and set data: 00.

Main unit

IR receiver jig

CN003
pin 

5

Frequency counter

Mode

VTR playback

Signal

Alignment tape:

For audio operation check
(XH5-3 (NTSC))
(XH5-3P (PAL))

Measurement Point

VIDEO OUT terminal of IR receiver
jig (Terminated at 75 

Ω

)

Measuring Instrument

Oscilloscope

Adjustment Page

D

Adjustment Address

91

Specified Value

A = 1.00 ± 0.05 V

Connection of Equipment:
Connect the measuring device as shown in the following figure,
and adjust.

Fig. 5-3-19

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: D, address: 91, and change the data, set the video
signal amplitude (A) to the specified value.

3)

Press the PAUSE button of the adjusting remote commander.

4)

Select page: 0, address: 01, and set data: 00.

Fig. 5-3-20

Main unit

IR receiver jig

VIDEO 
OUT

75 

Ω

 

75 

Ω

 (1-247-804-11)

Oscilloscope

White (100%)

A

H

White (100%)

A

H