Sharp XG-V10XE (serv.man32) User Manual / Operation Manual ▷ View online
12
10
Click “Next>”.
w
The “Choose Destination Location” dialogue box will open.
11
The folder under which the software will be installed is
displayed in “Destination Folder”.
displayed in “Destination Folder”.
To select another folder, click “Browse...”.
12
Click “Next>”.
w
“Auto-Launch Setup”
dialogue box will open.
13
Installing/
Uninstalling
13
Click “ON” under “Auto-Launch” to automatically launch
the software every time you start your PC. (Recommended)
the software every time you start your PC. (Recommended)
If you set “Auto-Launch ON”, a “Sharp Advanced Presentation
Software Professional Edition”
Software Professional Edition”
icon will reside in the Windows
task tray. If not, use the “Sharp Advanced Presentation
Software Professional Edition”
Software Professional Edition”
shortcut icon on the desktop or
the Windows “Start” menu.
14
Click “Install>”.
w
Installation will start.
w
When the installation is completed, the “Setup Complete”
dialogue box will open. To use the programme immediately,
please restart your computer.
dialogue box will open. To use the programme immediately,
please restart your computer.
15
Click “Finish”.
14
Setting up your PC for Infrared Communications (IrCOM)
If you use the NV5/6/7, image transfer can be performed using infrared
communications (IrCOM).
To use infrared communications, set the PC’s port for infrared
communications according to the following steps.
communications (IrCOM).
To use infrared communications, set the PC’s port for infrared
communications according to the following steps.
Infrared communications (IrCOM) cannot be used with Windows NT.
1
Click “Start”, and then click “Settings”, then select
“Control Panel”.
“Control Panel”.
w
The “Control Panel” window will open.
2
Double click the “Infrared Monitor” icon.
w
The “Infrared Monitor” window will open.
For Windows 95 users:
If an “Infrared Monitor” icon is not displayed, a Microsoft IrDA 2.0
(Infrared Driver) is not installed on the computer.
You can obtain it from the Microsoft’s site on the Internet.
If an “Infrared Monitor” icon is not displayed, a Microsoft IrDA 2.0
(Infrared Driver) is not installed on the computer.
You can obtain it from the Microsoft’s site on the Internet.
15
Installing/
Uninstalling
3
Click the “Options” tab.
w
The “Options” sheet will open.
4
Check the “Enable infrared communication” check box.
Select the port used for infrared communications.
Select the port used for infrared communications.
Refer to the PC’s instruction manual for the appropriate port settings.
Do not check the “Search for and provide status for devices within
range” and “Limit connection speed to” check box.
Do not check the “Search for and provide status for devices within
range” and “Limit connection speed to” check box.
Click on the first or last page to see other XG-V10XE (serv.man32) service manuals if exist.