Sharp XG-P10XE (serv.man12) User Manual / Operation Manual ▷ View online
16
18
19
20
19
21
22
Controlling the Projector’s Adjustment
RS-232C Control
This function enables you to control the following projector adjustments
from your PC.
Refer to the projector’s operation manual for details on each adjustment.
from your PC.
Refer to the projector’s operation manual for details on each adjustment.
Adjustment
Sheet
Page
Auto Sync
Black Screen
Digital Shift
Focus
Freeze
Input Select
Keystone
Power
PRJ Mode
Input1/2 Gamma
Input3 Gamma
Zoom
Input1 PICT/Input2 PICT
Input1 Resize/Input2 Resize
Input1 Signal Type/Input2 Signal Type
Input1 I/P Conversion/Input2 I/P Conversion
Auto Sync Display
Auto Sync Setup
Input Adjust
Settings
Special Modes
Input3 I/P Conversion
Input3 PICT
Input3 Resize
Audio Adjust
Mute
Volume
Auto Power Off
Background Image
Black Screen Display
OSD Display
Startup Image
Video System
Set Up
Input1 PICT/Input2 PICT
Fine Sync
Input3 PICT
Audio
Options
17
Adjusting and
Controlling
● Adjustments can still be made from the RS-232C Control utility
regardless of the difference in settings in the projector’s menu.
● If you move to RS-232C Control during Presentation Transfer,
Capture & Transfer or Gamma Correction, Sharp Advanced
Presentation Software automatically confirms the adjustments on
the projector and shows them in the “RS-232C Control” window as
default settings.
Presentation Software automatically confirms the adjustments on
the projector and shows them in the “RS-232C Control” window as
default settings.
● Also when you change the sheet of the “RS-232C Control” window
to proceed to the other projector adjustment, this confirmation is
performed. In this case, it will repeat at regular intervals afterwards
and the “RS-232C Control” window may show the settings on the
projector.
performed. In this case, it will repeat at regular intervals afterwards
and the “RS-232C Control” window may show the settings on the
projector.
● The Automatic Power Shutoff function will not operate when
performing RS-232C Control, although you turn “Auto Power Off”
ON in the
ON in the
“Options”
sheet. This function operates during
Presentation Transfer, Capture & Transfer, or Gamma Correction.
● To use RS-232C Control after transferring images in “Presentation
Transfer”,“Capture
&
Transfer” or “Quick Transfer”, switch
the input
in “Input Select”
(page 18)
.
Before Adjusting
Please connect a serial (RS-232C) cable to the projector and the PC
(page 6)
, select the correct COM Port on the PC, then proceed with
RS-232C Control.
1
Select the “RS-232C Control” mode.
See section “Opening Modes”
(page 12)
.
w The “RS-232C Control” window will open.
2
Click the tab of the sheet including your desired
adjustment controller.
adjustment controller.
18
“Set Up” Adjustment
1
Select the “Power” ON/OFF.
2
Select the “Input Select”.
3
To make “PRJ Mode” select
4
To make “Input1/2 Gamma” select
5
To make “Input3 Gamma” select
6
To make “Focus” adjustments
7
To make “Keystone” adjustments
Slide the bar to the desired location or simply type in the desired
value in the box.
value in the box.
8
To make “Digital Shift” adjustments
9
To make “Zoom” adjustments
0
Select the “Black Screen” ON/OFF.
q
To start “Auto Sync”
Press the “Auto Sync” button.
w
Select the “Freeze” ON/OFF.
e
To send all the adjustment data to the projector
Press the “Send” button to control all the adjustments on this
sheet.
sheet.
r
To receive data from the projector
Press the “Receive” button to confirm the adjustments on the
projector.
projector.
t
A “NOW TRANSMITTING...” message
is displayed during
transmission.
When using the PG-C30X, since operation is manual, the “Focus” and
“Zoom” adjustments cannot be performed.
“Zoom” adjustments cannot be performed.
1
2
3
4
5
0 q
w e
r
6
7
7
8
9
t
t
19
Adjusting and
Controlling
“Input1 PICT”/“Input2 PICT”/“Input3 PICT” Adjustment
●
For “Input1 PICT” adjustment, “Color”, “Tint” and “Sharp”
adjustments are available for component input signal only. (“Sharp”
adjusts DVD 480i signal only.)
adjustments are available for component input signal only. (“Sharp”
adjusts DVD 480i signal only.)
●
For “Input2 PICT” adjustment, “Color”, “Tint” and “Sharp”
adjustments are not available.
adjustments are not available.
1
to
8
: Slide the bar to the desired location or simply type in the desired
value in the box.
1
To make “Contrast” adjustment
2
To make “Bright” adjustment
3
To make “Red” adjustment
4
To make “Blue” adjustment
5
To make “Color Temp” adjustment
6
To make “Color” adjustment
7
To make “Tint” adjustment
8
To make “Sharp” adjustment
9
To reset the adjustments
1
to
8
Press the “Reset” button.
0
To make “Signal Type” select
q
To make “Resize” select
Select a size mode from the pull down menu. It will change the
pixel composition to resize the picture on the screen.
pixel composition to resize the picture on the screen.
w
To make “I/P Conversion” select
e
To send all the adjustment data to the projector
Press the “Send” button to control all the adjustments on this sheet.
r
To receive data from the projector
Press the “Receive” button to confirm the adjustments on the projector.
t
A “NOW TRANSMITTING...” message
is displayed during
transmission.
When using the PG-C30X, the “Sharp” adjustment cannot be performed.
1
2
3
4
5
0
2
3
4
5
0
q
w
e
r
6
7
8
7
8
9
t
Click on the first or last page to see other XG-P10XE (serv.man12) service manuals if exist.