Sharp XG-P10XE (serv.man12) User Manual / Operation Manual ▷ View online
12
Starting and Quitting
Opening Modes
Before starting the software, make sure that the projector and the PC
are correctly setup
are correctly setup
(page 6)
. There are three ways to start up the software.
Starting from the “Sharp Advanced Presentation Software”
icon in the Windows task tray
icon in the Windows task tray
This icon appears when “Auto-Launch ON” is selected.
See page 14
for “Auto-Launch” setting.
1
Start up the projector.
Make sure to turn the projector on first. The computer should always
be turned on last.
be turned on last.
2
Start up the PC. Click the “Sharp Advanced Presentation
Software” icon in the Windows task tray.
Software” icon in the Windows task tray.
w The “Sharp Advanced Presentation Software” window will
open.
3
Select the mode you require from the “Mode” menu. Or
you can use the shortcut buttons below the menu bar.
you can use the shortcut buttons below the menu bar.
Gamma
Correction
Correction
RS-232C
Control
Control
Presentation
Transfer
Transfer
Capture &
Transfer
Transfer
w The mode dialog box will open.
13
Basic
Operations
Starting from the Windows “Start” button
1
Start up the projector.
Make sure to turn the projector on first. The computer should always
be turned on last.
be turned on last.
2
Start up the PC. Click the “Start” button, set the pointer
to “Programs” and then “Sharp Advanced Presentation
Software”, and then select the mode you require.
to “Programs” and then “Sharp Advanced Presentation
Software”, and then select the mode you require.
w The mode dialog box will open.
Starting from the “Sharp Advanced Presentation Software”
shortcut icon on the Windows desktop
shortcut icon on the Windows desktop
1
Start up the projector.
Make sure to turn the projector on first. The computer should always
be turn on last.
be turn on last.
2
Double click the “Sharp Advanced Presentation Software”
shortcut icon on the Windows desktop, and then select
the mode you require.
shortcut icon on the Windows desktop, and then select
the mode you require.
w The mode dialog box will open.
14
Changing Auto-Launch Setting
The default “Auto-Launch” setting is “ON”, which launches this
software automatically when the PC starts up. You can change the setting
as follows.
software automatically when the PC starts up. You can change the setting
as follows.
1
Click the “Option” menu, select “Auto-Launch ON/OFF”.
2
Select the setting as required.
When “Auto-Launch ON” is selected
● The “Sharp Advanced Presentation Software” icon is resident in
the Windows task tray.
● The software is automatically launched when the PC starts up.
When “Auto-Launch OFF” is selected
● The “Sharp Advanced Presentation Software” icon is removed
from the Windows task tray.
● In this case the software must be started from the “Start” menu or
the “Sharp Advanced Presentation Software” shortcut icon on the
Windows desktop.
Windows desktop.
Quitting
Click the “File” menu, and select “Exit”.
Or you can use the
Or you can use the
button.
15
Basic
Operations
Help
To view Help, click the “Help” menu. When the “Help” window opens,
click the desired item in the Help list.
click the desired item in the Help list.
To check the software version, select “About This Software...” from
the “Help” menu.
the “Help” menu.
Click on the first or last page to see other XG-P10XE (serv.man12) service manuals if exist.