Sharp MX-PE10 FIERY (serv.man2) Service Manual ▷ View online
R
EPLACING
PARTS
40
T
O
REMOVE
AND
REPLACE
THE
TOP
PANEL
N
OTE
:
To remove the top panel, you must first remove the left, right, and front panels.
1 Remove the plug from the top panel.
From the cutout in left side of the top panel, access and loosen the locking bolt, and then
remove the plug.
remove the plug.
2 Loosen the top panel.
Slide the top panel a few inches toward the front of the chassis to disengage the hooks in the
panel from the slots in the top of the chassis.
panel from the slots in the top of the chassis.
N
OTE
:
You may need to tap the back edge of the panel toward the front of the chassis to
disengage the panel.
3 Detach the UIB cable from the motherboard.
4 Remove the panel from the chassis.
Carefully route the UIB cable out of the hole in the top of the chassis as you remove the top
panel.
panel.
F
IGURE
9:
Removing/replacing the top panel
Plug
Slot (1 of 4)
Cutout
UIB cable
R
EPLACING
PARTS
41
5 To replace the top panel, route the UIB cable through the hole in the top of the chassis and
attach it to motherboard connector J38.
6 Position the top panel on the top of the chassis.
Place the hooks on the underside of the panel into the slots in the top of the chassis, and then
slide the top panel toward the back of the chassis to engage the hooks.
slide the top panel toward the back of the chassis to engage the hooks.
N
OTE
:
You may need to tap the front edge of the panel toward the back of the chassis to
engage the panel completely.
7 Replace the plug on the top panel.
Correctly align the plug, and then place it into the receptacle on the top panel. Secure the
plug by replacing the locking bolt through the cutout in the left side of the top panel.
plug by replacing the locking bolt through the cutout in the left side of the top panel.
R
EPLACING
PARTS
42
Removing and replacing boards
This section includes procedures for removing and replacing the following boards:
• Printer interface board
• User interface board
• Motherboard
The Fiery Server is shipped from the factory with a standard board configuration. If optional
components have been installed, see the documentation that accompanies the particular
option kit.
components have been installed, see the documentation that accompanies the particular
option kit.
Printer interface board
The printer interface board provides the print interface between the Fiery Server and the
MFP. It is installed in motherboard connector PCIE x8. The printer interface board processes
the image data and sends it to the MFP through the MFP interface cable available on the
Fiery Server connector panel.
MFP. It is installed in motherboard connector PCIE x8. The printer interface board processes
the image data and sends it to the MFP through the MFP interface cable available on the
Fiery Server connector panel.
F
IGURE
10:
Diagram of the printer interface board
T
O
REMOVE
THE
PRINTER
INTERFACE
BOARD
1 Shut down and open the Fiery Server (see pages
34
and
37
).
To remove the printer interface board, you must remove the left panel.
2 Make sure that the printer interface cable is removed from the Fiery Server connector panel.
3 Remove the board mounting bracket screw that attaches the printer interface to the chassis.
4 Remove the printer interface board from the chassis.
Grasp the printer interface board at the front and back edges and gently pull the board
straight out of its motherboard connector.
straight out of its motherboard connector.
5 Place the printer interface board in an antistatic bag.
20-pin printer
interface connector
interface connector
PCIE x8 connector
R
EPLACING
PARTS
43
T
O
REPLACE
THE
PRINTER
INTERFACE
BOARD
1 Seat the printer interface board in the mother connector, and then secure it to the chassis
with the board mounting bracket screw that you removed earlier.
The printer interface board edge connector is keyed to fit in the motherboard connector only
when properly oriented.
when properly oriented.
2 Reassemble the Fiery Server and verify its functionality (see
page 80
).
Click on the first or last page to see other MX-PE10 FIERY (serv.man2) service manuals if exist.