Sharp MX-PE10 FIERY (serv.man2) Service Manual ▷ View online
R
EPLACING
PARTS
32
F
IGURE
5:
Exploded view of components
21
1
12
13
8
10
15
17
16
5
22
23
14
7
3
2
4
6
9
11
18
19
20
24
Key
1 Top panel plug
2 Top panel
3 User interface board (UIB)
4 Component sled
5 Switch bank assembly
6 DVD drive
7 Front panel
8 Upper faceplate
9 UIB cable
10 Hard disk drive bracket
11 Hard disk drive
12 Side panel (left)
13 Hard disk drive data cables
14 DVD drive power/data combination cable
15 CPU cooling assembly
16 Printer interface board
17 DIMMs
18 Battery
19 CPU
20 Motherboard
21 Fan
22 Chassis
23 Power supply
24 Side panel (right)
N
OTE
:
UIB buttons, CPU fan cable, tie-wraps, cable clamps, dongle(s), and external cables are not shown.
R
EPLACING
PARTS
33
F
IGURE
6:
Power and data cable connections
Cable key
From
To
1. Power supply cable
Power supply
a. CPU power connector (PW1)
b. Motherboard power connector (PW2)
c. DVD drive power connector (combined with data)
d. Hard disk drive power connector
2. Front panel USB port cables
Front panel
Motherboard connectors J22, J35 (see detail above)
3. UIB cable
User interface board
Motherboard connector J38 (see detail above)
4. Power and reset cables
Front panel
Motherboard connector JP4 (see detail above)
5. Speaker cable
Front panel
Motherboard connector J40 (see detail above)
6. Front panel fan cable
Front panel fan
Motherboard connector FAN 4 (see detail above)
7. DVD drive power/data combo cable
DVD drive
Motherboard connector SATA 0 (see detail above)
8. Hard disk drive (HDD) data cable
Hard disk drive (HDD)
Motherboard connector SATA 1 (see detail above)
9. CPU fan cable
CPU fan
Motherboard connector FAN 1 (If present, keep the
cable cover on the CPU fan cable.)
cable cover on the CPU fan cable.)
1b
1c
9
5
N
OTE
:
Power supply, DIMMs, and
printer interface are not shown.
1a
8
7
6
1d
3
2
4
R
EPLACING
PARTS
34
Accessing internal components
Shut down and open the Fiery Server when you need to inspect or service internal
components.
components.
For more information on how to shut down the Fiery Server, see
page 26
.
Shutting down the system
You can shut down the Fiery Server from the Fiery Server control panel or the MFP touch
panel. When shutting down the Fiery Server, do the following:
panel. When shutting down the Fiery Server, do the following:
• Remove the power cable from the connector panel before removing or connecting
interface cables or accessing the internal components.
• Remember that when the Fiery Server is powered off, network access to the MFP is
interrupted. Always obtain permission from the network administrator before you take the
Fiery Server off the network.
Fiery Server off the network.
• If you are cycling power, wait at least 10 seconds before powering back on.
• If you are unable to shut down the Fiery Server through the control panel or the MFP
touch panel, power off by holding down the power button on the front of the Fiery Server
for up to eight seconds.
for up to eight seconds.
• Using the reset button may cause the system to operate unpredictably. Use the reset button
on the front of the Fiery Server only if the system is unresponsive to keyboard or mouse
actions.
actions.
R
EPLACING
PARTS
35
T
O
SHUT
DOWN
FROM
THE
F
IERY
S
ERVER
CONTROL
PANEL
N
OTE
:
Notify the network administrator before you remove the Fiery Server from
the network.
1 Make sure that the Fiery Server is not receiving, processing, or printing any jobs.
If Printing appears on the printer touch panel, the Fiery Server is processing. You must wait
until the system finishes and reaches Idle before restarting or shutting down.
until the system finishes and reaches Idle before restarting or shutting down.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
Idle before beginning the shutdown procedure.
2 If the logo screen is displayed, press the Menu button once to display the Functions menu.
3 Select Shut Down System.
N
OTE
:
Use the reset button on the front of the Fiery Server only if the system is unresponsive
to keyboard or mouse actions.
Allow the system to shut down and power off.
Before accessing internal components following a shutdown, make sure that all cables are
disconnected from the back of the Fiery Server.
disconnected from the back of the Fiery Server.
This logo screen indicates that the Fiery Server is Idle.
Server name
Menu button
Eject CD/DVD
IP Address
Restart Server
Shut Down System
IP Address
Restart Server
Shut Down System
Server name
Immediately shuts down
the Fiery Server
the Fiery Server
Click on the first or last page to see other MX-PE10 FIERY (serv.man2) service manuals if exist.