Sharp MX-PE10 FIERY (serv.man2) Service Manual ▷ View online
U
SING
THE
F
IERY
S
ERVER
24
Buttons
Activity light
The activity light on the Fiery Server control panel indicates current Fiery Server activity.
If the light is:
If the light is:
Line selection
buttons
buttons
Use the four line selection buttons on the right side of the control panel to
select the command displayed on the corresponding line of the LCD
display.
select the command displayed on the corresponding line of the LCD
display.
Up and Down
buttons
buttons
Use to scroll to different screens in multi-screen lists or prompts.
Menu button
Press to view the
Eject
CD/DVD
, IP Address,
Restart Server
,
Shut
Down
System, and Reboot System options
.
Flashing amber
The Fiery Server is starting up and the BIOS has established
communication with the User Interface Board (UIB).
communication with the User Interface Board (UIB).
Flashing green
The Fiery Server is continuing startup and the Windows operating
system has established communication with the UIB.
system has established communication with the UIB.
Solid green
The Fiery Server is powered on and is in the Idle state.
Solid amber
The Fiery Server is powered off, but the printer interface cable is plugged
into the power source. The control panel LCD continues to draw power
when the Fiery Server is off.
into the power source. The control panel LCD continues to draw power
when the Fiery Server is off.
Flashing or
solid red
solid red
An error has caused printing to be disabled.
No light
The Fiery Server is powered off and the printer interface cable is not
connected to a power source.
connected to a power source.
U
SING
THE
F
IERY
S
ERVER
25
Fiery Server control panel Functions menu
The following options are available from the Fiery Server Functions menu:
•
MB Replacement:
Allows you to transfer any options stored in the hard disk drive of the
Fiery Server into a new motherboard.
N
OTE
:
The MB Replacement option appears only when you insert the motherboard
replacement dongle into a USB port.
•
Eject CD/DVD:
Allows you to eject media from the DVD drive. Media is also automatically
ejected whenever the Fiery Server is restarted, shut down, or rebooted. A hardware eject
button is also located below the disc slot.
button is also located below the disc slot.
•
IP Address:
Displays the current IP address of the Fiery Server.
•
Restart Server:
Includes options to Restart (soft reset) or Reboot (hard reset) the Fiery
Server. Selecting Restart resets the Fiery Server server software, but does not reboot the
entire system. Selecting Reboot shuts down all Fiery Server activity and reboots the system.
When you select Restart or Reboot, network access to the Fiery Server is temporarily
interrupted and all currently processing jobs are aborted and may be lost.
entire system. Selecting Reboot shuts down all Fiery Server activity and reboots the system.
When you select Restart or Reboot, network access to the Fiery Server is temporarily
interrupted and all currently processing jobs are aborted and may be lost.
•
Shut Down Server:
Shuts down all Fiery Server server software and powers off the system.
Always select this option to power off the system.
N
OTE
:
Avoid using the reset button on the front panel, as doing so may cause the system to
operate unpredictably. Use the reset button on the front of the Fiery Server only if the system
is unresponsive to keyboard or mouse actions.
is unresponsive to keyboard or mouse actions.
Network status LEDs
Two LEDs next to the Ethernet connector indicate the network speed. When a data transfer
occurs between the Fiery Server and the network, the appropriate LED(s) blink to indicate
network activity. For additional network information, see Configuration and Setup, which is
part of the user documentation set.
occurs between the Fiery Server and the network, the appropriate LED(s) blink to indicate
network activity. For additional network information, see Configuration and Setup, which is
part of the user documentation set.
N
OTE
:
Network connectivity is supported only through the upper RJ-45 port on the Fiery
Server connector panel. The lower port is the scan interface. The network and scan cables
look similar, but are not interchangeable. Make sure not to swap the cables. (For the correct
connections, see
look similar, but are not interchangeable. Make sure not to swap the cables. (For the correct
connections, see
page 29
).
Network link speed
LED 1
LED 2
10 Megabits/second
Off
Green
100 Megabits/second
Green
Green
1000 Megabits/second
Amber
Green
LED 2
LED 1
Ethernet network port
(Upper RJ-45)
(Upper RJ-45)
U
SING
THE
F
IERY
S
ERVER
26
Starting, shutting down, restarting, and rebooting
The customer will generally leave the Fiery Server on all of the time. Remember that when the
Fiery Server is powered off, network access to the MFP is interrupted. Power off the Fiery
Server when you need to service it and before you remove or attach any cables to it.
Fiery Server is powered off, network access to the MFP is interrupted. Power off the Fiery
Server when you need to service it and before you remove or attach any cables to it.
N
OTE
:
Use the reset button on the front of the Fiery Server only if the system is unresponsive
to keyboard or mouse actions.
T
O
START
THE
F
IERY
S
ERVER
1 Make sure that the power cable is attached and that the power switch is in the ON position.
2 Press the power button on the front panel.
3 Check the Activity light on the control panel.
The power supply automatically senses the correct voltage. Allow startup to proceed without
interruption. Do not press any buttons on the control panel while the system is starting.
interruption. Do not press any buttons on the control panel while the system is starting.
U
SING
THE
F
IERY
S
ERVER
27
T
O
SHUT
DOWN
,
RESTART
,
OR
REBOOT
FROM
THE
F
IERY
S
ERVER
CONTROL
PANEL
N
OTE
:
Notify the network administrator before you remove the Fiery Server from
the network.
1 Make sure that the Fiery Server is not receiving, processing, or printing any jobs.
If Printing appears on the control panel, the Fiery Server is processing. You must wait until
the system finishes and reaches Idle before restarting or shutting down.
the system finishes and reaches Idle before restarting or shutting down.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
Idle before beginning the shutdown procedure.
2 If the logo screen is displayed, press the Menu button once to display the Functions menu.
3 Make a selection:
• To restart or reboot the Fiery Server, select Restart Server. A submenu displays allowing
you to select Restart Server, Reboot System, or Cancel.
• To shut down the Fiery Server immediately, select Shut Down System.
N
OTE
:
Use the reset button on the front of the Fiery Server only if the system is unresponsive
to keyboard or mouse actions.
Allow the system to shut down and power off or restart.
If you selected Restart Server, you may need to wait 1 minute or more for the server software
to restart.
to restart.
Before accessing internal components following a shutdown, make sure that all cables are
disconnected from the back of the Fiery Server.
disconnected from the back of the Fiery Server.
Server name
This logo screen indicates that the Fiery Server is Idle.
Menu button
Eject CD/DVD
IP Address
Restart Server
Shut Down System
IP Address
Restart Server
Shut Down System
Server name
Restart Server
Reboot System
Cancel
Cancel
Server Name
Immediately shuts down
the Fiery Server
the Fiery Server
Displays a submenu
Click on the first or last page to see other MX-PE10 FIERY (serv.man2) service manuals if exist.