Sharp MX-M310 / MX-M310N (serv.man11) User Manual / Operation Manual ▷ View online
39
CONVENIENT COPY FUNCTIONS
3
1
Place the original(s). (p.23, p.24)
2
Touch the [OUTPUT] key.
3
Touch the [STAPLE SORT] key.
When the [STAPLE
SORT] key is selected,
the offset tray is
automatically selected as
the output tray. The top
tray and centre tray
cannot be used.
SORT] key is selected,
the offset tray is
automatically selected as
the output tray. The top
tray and centre tray
cannot be used.
4
Touch the [OK] key.
5
Select the number of copies and other
copy settings, and then press the
[START] key (
copy settings, and then press the
[START] key (
).
6
[When using the RSPF:]
Copying will start after all originals have been
scanned.
scanned.
[When using the document glass:]
Replace the original with the next original and
press the [START] key ( ). Repeat this step until
all originals have been scanned, and then touch
the [READ-END] key.
press the [START] key ( ). Repeat this step until
all originals have been scanned, and then touch
the [READ-END] key.
If the memory becomes full while scanning the
originals, "MEMORY IS FULL. PRESS [START] TO
BEGIN COPYING OR [CA] TO CANCEL." will appear.
To copy only the originals that have been scanned,
press the [START] key ( ). To cancel the job, press
the [CLEAR ALL] key ( ).
originals, "MEMORY IS FULL. PRESS [START] TO
BEGIN COPYING OR [CA] TO CANCEL." will appear.
To copy only the originals that have been scanned,
press the [START] key ( ). To cancel the job, press
the [CLEAR ALL] key ( ).
2-SIDED COPY
OUTPUT
The number of originals that can be scanned
into memory can be increased by increasing
the memory allocation in the administrator
settings, or by installing more memory. (See
"6. SYSTEM SETTINGS (ADMINISTRATOR).)
into memory can be increased by increasing
the memory allocation in the administrator
settings, or by installing more memory. (See
"6. SYSTEM SETTINGS (ADMINISTRATOR).)
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
Note
MX-M310.book 39 ページ ２００９年８月７日 金曜日 午後１時１０分
40
SPECIAL MODES
When the [SPECIAL MODES] key in the main screen of copy mode is touched, the special modes screen will
appear. This screen contains the following special function keys.
appear. This screen contains the following special function keys.
[MARGIN SHIFT] key (p.42)
Use this to shift the image on the copy paper to
create binding margins.
Use this to shift the image on the copy paper to
create binding margins.
[ERASE] key (p.43)
Use this to erase peripheral shadows that occur
when making copies of books and other thick
originals.
Use this to erase peripheral shadows that occur
when making copies of books and other thick
originals.
[DUAL PAGE COPY] key (p.44)
Use this to make separate copies of the left and
right pages of bound documents.
Use this to make separate copies of the left and
right pages of bound documents.
[PAMPHLET COPY] key (p.45)
The pamphlet copy function is used to arrange
copies in the proper order for centre-stapling and
folding into a booklet. Two original pages are
copied onto each side of the paper, such that a
total of four pages are copied onto one sheet.
The pamphlet copy function is used to arrange
copies in the proper order for centre-stapling and
folding into a booklet. Two original pages are
copied onto each side of the paper, such that a
total of four pages are copied onto one sheet.
[JOB BUILD] key (p.46)
Use this when you need to copy more originals
than can be placed in the RSPF at once. This
allows you to divide the originals into sets and
scan them sequentially in the RSPF.
Use this when you need to copy more originals
than can be placed in the RSPF at once. This
allows you to divide the originals into sets and
scan them sequentially in the RSPF.
[MULTI SHOT] key (p.47)
The multi shot copy function is used to copy two or
four originals onto one sheet of copy paper in any
of four layout patterns.
The multi shot copy function is used to copy two or
four originals onto one sheet of copy paper in any
of four layout patterns.
(
) key, (
) key
Use these to change pages in the special functions
screen.
screen.
[ORIGINAL SIZE] key (p.48)
Use to manually select the original size. When the
original size is selected, the auto ratio select
function will automatically select an appropriate
ratio based on the paper size.
Use to manually select the original size. When the
original size is selected, the auto ratio select
function will automatically select an appropriate
ratio based on the paper size.
[COVER] key (p.49)
Press this to use a different type of paper for front
and back covers (When the RSPF is used.).
Press this to use a different type of paper for front
and back covers (When the RSPF is used.).
[B/W REVERSE] key (p.51)
Use to reverse black and white areas.
Use to reverse black and white areas.
[CARD SHOT] key (p.52)
The front and reverse sides of a card can be
copied onto one sheet of paper.
The front and reverse sides of a card can be
copied onto one sheet of paper.
[OK] key
Touch to return to the main screen of the copy
mode.
Touch to return to the main screen of the copy
mode.
A4
A4
A4
A4
A3
• The displayed menu will vary
depending on the country and
regions.
regions.
• The displayed menu will vary
depending on the equipment
installed.
installed.
1
2
3
4
5
6
Some functions cannot be used in
combination with each other. If a prohibited
combination of functions has been selected, a
message will appear in the touch panel.
combination with each other. If a prohibited
combination of functions has been selected, a
message will appear in the touch panel.
7
8
9
10
11
12
Note
MX-M310.book 40 ページ ２００９年８月７日 金曜日 午後１時１０分
41
CONVENIENT COPY FUNCTIONS
3
GENERAL PROCEDURE FOR USING THE SPECIAL
FUNCTIONS
FUNCTIONS
1
Touch the [SPECIAL MODES] key.
2
Touch the key of the desired special
mode.
mode.
Example:
Selecting the margin shift
function
Selecting the margin shift
function
Procedures for modes that require further settings
are explained starting on the next page.
are explained starting on the next page.
SPECIAL MODES
2-SIDED COPY
MARGIN SHIFT
PAMPHLET COPY
MX-M310.book 41 ページ ２００９年８月７日 金曜日 午後１時１０分
42
CONVENIENT COPY FUNCTIONS
MARGIN SHIFT COPY
The margin shift function is used to automatically shift the text or image on the copy paper approximately 10 mm
(1/2") in its initial setting.
(1/2") in its initial setting.
1
Touch the [MARGIN SHIFT] key in the
special modes screen.
special modes screen.
The margin shift setting
screen will appear.
The margin shift icon
(
screen will appear.
The margin shift icon
(
, etc.) will also
appear in the screen to
indicate that the function
is turned on.
indicate that the function
is turned on.
2
Select the shift direction.
Touch the [RIGHT],
[LEFT], or [DOWN] key.
The selected key will be
highlighted.
[LEFT], or [DOWN] key.
The selected key will be
highlighted.
3
Adjust the shift width as needed and
touch the [OK] key.
touch the [OK] key.
Use the
and
keys
to set the shift width. The
shift amount can be set
from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
shift amount can be set
from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
4
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
Image shifted
to the right
to the right
Image shifted
to the left
to the left
Image shifted
down
down
Margin
Margin
Margin
Margin
One-sided copying
Two-sided copying
Image shifted
to the right
to the right
Margin
Image shifted
to the left
to the left
Margin
Image shifted
down
down
Or
• Right, left or down can be
selected for the shift direction
as shown in the illustration.
as shown in the illustration.
• The shift width (margin) can
be set from 0 mm to 20 mm
increments of 1 mm (0" to 1"
in increments of 1/8").
increments of 1 mm (0" to 1"
in increments of 1/8").
• If [DOWN] key is selected, set
the original(s) so that the
margin to be increased is set
to the rear side of the RSPF
or the document glass.
margin to be increased is set
to the rear side of the RSPF
or the document glass.
MARGIN SHIFT
PAMPHLET COPY
RIGHT
LEFT
DOWN
About the steps that follow
If you are using the document glass, see page 23.
If you are using the RSPF, see page 24.
If you are using the document glass, see page 23.
If you are using the RSPF, see page 24.
• When margin shift is selected, rotation
copying will not function.
• This feature cannot be used with paper that
is not a standard size.
• To cancel the margin shift function, touch
the [CANCEL] key in the margin shift
setting screen. (See the screen of step 3.)
setting screen. (See the screen of step 3.)
SIDE 1
(0 20)
mm
mm
(0 20)
mm
mm
SIDE 2
OK
CANCEL
OK
10
10
Note
MX-M310.book 42 ページ ２００９年８月７日 金曜日 午後１時１０分
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man11) service manuals if exist.