Sharp MX-M310 / MX-M310N (serv.man11) User Manual / Operation Manual ▷ View online
43
CONVENIENT COPY FUNCTIONS
3
ERASE COPY
The erase function is used to erase the shadow lines on copies that are produced when copying thick originals or
books. The erase modes that can be selected are shown below. The erase width is initially set to 10 mm (1/2").
books. The erase modes that can be selected are shown below. The erase width is initially set to 10 mm (1/2").
EDGE ERASE
Eliminates shadow lines around the edges of copies
caused when heavy paper or a book is copied.
caused when heavy paper or a book is copied.
CENTRE ERASE
Eliminates shadow lines produced by the bindings of
bound documents.
bound documents.
EDGE + CENTRE ERASE
Eliminates both the shadow lines around the edges of
copies and the shadow at the centre.
copies and the shadow at the centre.
1
Touch the [ERASE] key in the special
modes screen.
modes screen.
The erase setting screen
will appear.
The erase icon (
will appear.
The erase icon (
, etc.)
will also appear in the
screen to indicate that
the function is turned on.
screen to indicate that
the function is turned on.
2
Select the desired erase mode.
Select one of the three
erase modes. The
selected key will be
highlighted.
erase modes. The
selected key will be
highlighted.
3
Adjust the erase width as needed and
touch the [OK] key.
touch the [OK] key.
Use the
and
keys
to adjust the erase width.
The erase width can be
set from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
The erase width can be
set from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
4
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
MU
ERASE
FT
PY
JOB
BUILD
ERASE
CENTRE
ERASE
EDGE+CENTRE
ERASE
EDGE
ERASE
EDGE
CANCEL
OK
10
(0 20)
mm
mm
About the steps that follow
If the document glass is being used, see page 23.
If the RSPF is being used, see page 24.
If the document glass is being used, see page 23.
If the RSPF is being used, see page 24.
• This feature cannot be used with
non-standard size originals.
• This feature cannot be selected when
mixed feeding (p.26) is used.
• To cancel the erase copy function, touch the
[CANCEL] key in the erase setting screen.
(See the screen of step 3.)
(See the screen of step 3.)
Note
MX-M310.book 43 ページ 2009年8月7日 金曜日 午後1時10分
44
CONVENIENT COPY FUNCTIONS
DUAL PAGE COPY
The dual page copy function produces separate copies of two adjoining pages on the document glass. It is
especially useful when copying books and other bound documents.
especially useful when copying books and other bound documents.
[Example] Copying the right and left pages of a book
1
Touch the [DUAL PAGE COPY] key in
the special modes screen.
the special modes screen.
The [DUAL PAGE
COPY] key is highlighted
to indicate that the
function is enabled, and
the dual page copy icon
(
COPY] key is highlighted
to indicate that the
function is enabled, and
the dual page copy icon
(
) will appear in the
screen.
2
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the
main screen of copy
mode.
main screen of copy
mode.
3
Place the originals on the document
glass. (p.23)
glass. (p.23)
When copying book originals:
When copying a thick book, press down gently on the
book to flatten it against the document glass.
When copying a thick book, press down gently on the
book to flatten it against the document glass.
4
Make sure that B5 or A4 (8-1/2" x 11")
size paper is selected.
size paper is selected.
If B5 or A4 (8-1/2" x 11")
paper is not selected,
touch the [PAPER
SELECT] key to select
B5 or A4 (8-1/2" x 11")
paper.
paper is not selected,
touch the [PAPER
SELECT] key to select
B5 or A4 (8-1/2" x 11")
paper.
5
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
• A reduction setting can be selected when using
the dual page copy function, however, an
enlargement setting cannot be selected.
enlargement setting cannot be selected.
• The dual page copy function can only be used
when copying from the document glass. The
RSPF cannot be used.
RSPF cannot be used.
• B5 or A4 (8-1/2" x 11") paper can be used.
Book original
Dual page copy
MULTI SHOT
1/2
DUAL PAGE
COPY
0
1/2
OK
DUAL PAGE
COPY
Centre line of
original
original
This page
is copied
first.
is copied
first.
Index B5, A4
(8
1
/
2
x11 )
• To cancel the dual page copy function,
touch the [DUAL PAGE COPY] key in the
special modes screen. (The key will no
longer be highlighted.) (See the screen of
step 1.)
special modes screen. (The key will no
longer be highlighted.) (See the screen of
step 1.)
• To erase shadows caused by the document
binding, use the edge erase function (p.43).
(Centre Erase and Edge + Centre Erase
cannot be used with the dual page copy
function.)
(Centre Erase and Edge + Centre Erase
cannot be used with the dual page copy
function.)
PAPER SELECT
AUTO A4
100%
COPY RATIO
UT
LOGOUT
Note
MX-M310.book 44 ページ 2009年8月7日 金曜日 午後1時10分
45
CONVENIENT COPY FUNCTIONS
3
PAMPHLET COPY
The pamphlet copy function is used to arrange copies in the proper order for centre-stapling and folding into a
booklet. Two original pages are copied onto each side of the copy paper, such that a total of four pages are copied
onto each sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
booklet. Two original pages are copied onto each side of the copy paper, such that a total of four pages are copied
onto each sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example]: Copying 8 originals with pamphlet copy
• Scan the originals in order from the first page to the
last page. The order of copying will be automatically
adjusted by the machine.
adjusted by the machine.
• Either left binding (opening from right to left) or right
binding (opening from left to right) can be selected.
• Four originals will be copied onto one sheet. Blank
pages may be automatically added at the end,
depending on the number of the originals.
depending on the number of the originals.
1
Touch the [PAMPHLET COPY] key in
the special modes menu screen.
the special modes menu screen.
The pamphlet copy
setting screen will
appear. The pamphlet
copy icon (
setting screen will
appear. The pamphlet
copy icon (
, etc.) will
also appear in the upper
left corner of the screen
to indicate that the
function is enabled.
left corner of the screen
to indicate that the
function is enabled.
2
Specify whether 1-sided or 2-sided
originals will be copied.
originals will be copied.
3
Select the binding position ([LEFT
BINDING] or [RIGHT BINDING]) and
then touch the [OK] key in the
pamphlet copy setting screen.
BINDING] or [RIGHT BINDING]) and
then touch the [OK] key in the
pamphlet copy setting screen.
You will return to the
special modes menu
screen.
special modes menu
screen.
4
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
5
Place the original(s). (p.23, p.24)
6
Make sure that a suitable paper size
has been automatically selected.
has been automatically selected.
If the desired copy paper
size is not selected, use
the [PAPER SELECT] key
to select the paper size.
After the paper size is
selected, touch the [AUTO
IMAGE] key. A suitable
ratio will be automatically
selected.
size is not selected, use
the [PAPER SELECT] key
to select the paper size.
After the paper size is
selected, touch the [AUTO
IMAGE] key. A suitable
ratio will be automatically
selected.
7
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
8
[When using the RSPF:]
Copying will start after all originals have been
scanned.
scanned.
9
[When using the document glass:]
Replace the original with the next original and
press the [START] key ( ). Repeat this step until
all originals have been scanned, and then touch
the [READ-END] key.
press the [START] key ( ). Repeat this step until
all originals have been scanned, and then touch
the [READ-END] key.
1
2
3
4
5
6
7
8
7
8
5
6
3
4
1
2
Originals (two-sided)
Originals (one-sided)
First page
First page
The finished copies
can be folded.
can be folded.
MARGIN SHIFT
PAMPHLET COPY
CANCEL
OK
PAMPHLET COPY
ORIGINAL
2-SIDED
1-SIDED
RIGHT
BINDING
LEFT
BINDING
CANCEL
OK
D
RIGHT
BINDING
LEFT
BINDING
When the pamphlet copy function is selected,
two-sided copying will be automatically enabled.
two-sided copying will be automatically enabled.
To cancel the pamphlet copy function, touch
the [CANCEL] key in the pamphlet copy
setting screen. (See the screen of step 2.)
the [CANCEL] key in the pamphlet copy
setting screen. (See the screen of step 2.)
PAPER SELECT
AUTO A4
100%
Note
MX-M310.book 45 ページ 2009年8月7日 金曜日 午後1時10分
46
CONVENIENT COPY FUNCTIONS
JOB BUILD MODE
Use this function when you need to copy more originals than can be placed in the RSPF at once. (The maximum
number of originals that can be placed in the RSPF at once is 100.)
number of originals that can be placed in the RSPF at once is 100.)
Example: Copying 130 sheets (A4 (8-1/2" x 11") size originals)
1
Touch the [JOB BUILD] key in the
special modes menu screen.
special modes menu screen.
The [JOB BUILD] key is
highlighted.
The job build copy icon
(
highlighted.
The job build copy icon
(
) will also appear in
the screen to indicate
that the function is
enabled.
that the function is
enabled.
2
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the
main screen of copy
mode.
main screen of copy
mode.
3
Place the original(s) in the RSPF.
(p.24)
(p.24)
4
Make sure that a suitable paper size is
selected, select the number of copies
and any other desired copy settings,
and then press the [START] key (
selected, select the number of copies
and any other desired copy settings,
and then press the [START] key (
) .
Scanning begins. When
scanning of the first set
of originals (A in the
above example) is
finished, insert the
second set and press the
[START] key ( ).
scanning of the first set
of originals (A in the
above example) is
finished, insert the
second set and press the
[START] key ( ).
Repeat this step until all the remaining originals (B in
the above example) have been scanned.
Remove each scanned set of originals before inserting
the next set.
the above example) have been scanned.
Remove each scanned set of originals before inserting
the next set.
5
Touch the [READ-END] key.
Copying begins.
• If the memory becomes full while scanning the originals, "MEMORY IS FULL. PRESS [START] TO BEGIN
COPYING OR [CA] TO CANCEL." will appear. To copy only the originals that have been scanned, press the
[START] key (
[START] key (
) . To cancel the job, press the [CLEAR ALL] key (
).
• Depending on the content of the originals, the memory may become full before 100 originals have been scanned. In
this case, press the [START] key (
) to copy the originals that have been scanned, and then place the originals that
weren’t scanned in the RSPF once again and repeat the copy procedure.
• To increase the number of originals that can be scanned, install more memory or increase the memory
allocation in the administrator settings. (See "6. SYSTEM SETTINGS (ADMINISTRATOR)".)
Note
Originals
*
Divide the originals into sets so that each set is no more than
100 pages. Scan the sets in order beginning from the first
page of set A.
100 pages. Scan the sets in order beginning from the first
page of set A.
100 sheets
30 sheets
page 1
page 101
ERASE
T
Y
MUL
ERASE
JOB
BUILD
D
JOB
BUILD
MULTI SHOT
ERASE
1/2
OK
JOB
BUILD
DUAL PAGE
COPY
To cancel the job build mode function, touch
the [JOB BUILD] key in the special modes
screen so that it is no longer highlighted.
(See the screen of step 1.)
the [JOB BUILD] key in the special modes
screen so that it is no longer highlighted.
(See the screen of step 1.)
UT
LOGOUT
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
Note
MX-M310.book 46 ページ 2009年8月7日 金曜日 午後1時10分
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man11) service manuals if exist.