DOWNLOAD Sharp MX-M310 / MX-M310N (serv.man11) Service Manual ↓ Size: 10.39 MB | Pages: 127 in PDF or view online for FREE

The multi shot copy function is used to copy two or four originals onto one sheet of copy paper in a specified order.

Example: Copying four originals onto one sheet of paper
 (Page number: 4 in 1 (

), layout: (

)) 

• When using the multi shot copy function, place the 

originals, select the desired paper size, and select 
the copy mode before selecting the multi shot copy 
function in the special modes screen.

• When using the multi shot copy function, the 

appropriate copy ratio will be automatically set based 
on the original size, paper size, and the number of 
originals to be copied onto one sheet. The minimum 
reduction ratio is 25%. (The minimum ratio is 50% when 
the RSPF is used.) Depending on the original size, 
paper size, and the number of originals to be copied 
onto one sheet, portions of original images may be cut 
off.

The multi shot copy 
setting screen will 
appear. The multi shot 
copy icon (

, etc.) will 

also appear in the screen 
to indicate that the 
function is enabled.

Select the order in which 
the originals will appear 
on the copy.

Select [

], [

], or 

[

].

You will return to the special modes menu screen.

You will return to the main screen of copy mode.

Copying will start after all originals have been 
scanned. 

Replace the original with the next original and 
press the [START] key ( ). Repeat this step until 
all originals have been scanned, and then touch 
the [READ-END] key if necessary.

One-sided copy of 
one-sided original

Copy

One-sided copy of 
two-sided original

MULTI SHOT

1/2

DUAL PAGE

COPY

SPECIAL MODES

MULTI SHOT

OK

OK

CANCEL

LAYOUT

2in1

4in1

BORDER

OK

CANCEL

LAYOUT

BORDER

• The images may be rotated depending on 

the number of originals and the orientation 
of the originals and copy paper.

• To cancel the multi shot copy function, 

touch the [CANCEL] key in the multi shot 
setting screen  (the screen of step 2) .

OK

CANCEL

LAYOUT

BORDER

MX-M310.book  47 ページ  ２００９年８月７日　金曜日　午後１時１０分

If you wish to use the paper other than the automatically selected original size, original size setting is specified by 
the special modes. The mix feeding setting (p.26) is also selected here.

The original size setting 
screen will appear.

[MANUAL] key is highlighted and the selected paper 
size is displayed.

You will return to the special modes menu 
screen.

You will return to the main screen of the copy 
mode.

To select an inch size original, touch the 
[AB

INCH] key. Inch sizes will appear.

ORIGINAL

SIZE

CARD SHOT

COV

AL MODES

MANUAL

GINAL SIZE

AUTO

MIX SIZE ORIGINAL FEEDING MOD

OK

INCH

AB

OK

AUTO

MANUAL

ORIGINAL SIZE

A5

A4

A4R

B4

A3

To select mixed feeding, select the "MIX SIZE 
ORIGINAL FEEDING MODE" checkbox. 
Mixed feeding is explained on page 26.

03.fm  48 ページ  ２００９年８月７日　金曜日　午後３時４９分

Cover copy mode is used to add a cover to the front or back, or both the front and back, of a multipage document.
To use cover copy mode, the RSPF must be used.

One-sided originals

Back cover 
(no copying)

Front cover 
(can copy onto front side)

One-sided copies 
(copying onto a cover)

Two-sided originals

SHARP

SHARP

Cover original

1

2

3

4

1

2

3

4

3

4

5

1

2

Cover original

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side)

SHARP

1

2

3

4

5

One-sided originals

Two-sided copies 
(copying onto a cover)

Two-sided originals

2

3

4

1

Cover original

SHARP

1

2

3

4

SHARP

Cover original

2

3

4

1

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side) 
(Back side of cover is blank.)

• A front cover, back cover, or both a front and a 

back cover can be selected.

• You can specify whether or not the front cover is 

copied on.

• Copying is not possible on either side of a back 

cover.

2

3

4

1

Back cover

Front cover 

(not copying onto a cover)

One-sided originals

Two-sided originals

1

2

3

4

1

2

3

4

4

1

2

3

Front cover 

One-sided originals

Two-sided originals

1

2

3

4

4

1

2

3

Back cover

One-sided copies 
(not copying onto a cover)

One-sided copies 
(not copying onto a cover)

• A front cover, back cover, or both a front and a 

back cover can be selected.

MX-M310.book  49 ページ  ２００９年８月７日　金曜日　午後１時１０分

The cover  setting screen 
will appear.
The cover icon (

, etc.) 

will also appear in the 
screen to indicate that 
the function is turned on.

To add only a front cover, touch the [FRONT] key. To 
add only a back cover, touch the [BACK] key. To add 
both a front and back cover, touch the 
[FRONT+BACK] key.

Select [YES] or [NO] in 

the touch panel. If 
[YES] is selected, the 
first page of the 
document will be 
copied onto the front 
cover sheet.

Return to the special modes screen.

You will return to the main screen of copy mode.

Load the same size of 
paper as the paper to 
be used for the copy 
job.

OT

L

COVER

COVER

SPECIAL MODES

FRONT

BACK

FRONT+BACK

PRINT ON FRONT COVER?

YES

NO

OK

CANCEL

OK

CK

PRINT ON FRONT COVER?

YES

NO

OK

CANCEL

About the steps that follow
See page 24.

• It is not possible to copy on the inside of a 

front cover, nor on either side of a back 
cover.

• Be sure to place the originals in the RSPF. 

The document glass cannot be used for this 
function.

• During cover copying, stream feeding mode 

will not function even if enabled in the 
administrator settings. (See "6. SYSTEM 
SETTINGS (ADMINISTRATOR)".) 

• To cancel the cover copy function, select 

the cover copy function again and touch the 
[CANCEL] key. (See the screen of step 2.) 

MX-M310.book  50 ページ  ２００９年８月７日　金曜日　午後１時１０分