Sharp MX-M310 / MX-M310N (serv.man11) User Manual / Operation Manual ▷ View online
51
CONVENIENT COPY FUNCTIONS
3
B/W REVERSE COPY
The B/W REVERSE feature is used to reverse black and white in a copy to create a negative image.
• When the B/W reverse function is selected, the
exposure mode will be automatically set to TEXT
mode. Other exposure modes cannot be selected. If
B/W reverse is cancelled, TEXT mode will not
automatically be cancelled.
mode. Other exposure modes cannot be selected. If
B/W reverse is cancelled, TEXT mode will not
automatically be cancelled.
1
Touch the
key and then touch the
[B/W REVERSE] key in the special
modes menu screen.
modes menu screen.
The [B/W REVERSE]
key is highlighted.
The B/W reverse icon
(
key is highlighted.
The B/W reverse icon
(
) will also appear in
the screen to indicate
that the function is
enabled.
that the function is
enabled.
2
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
original
B/W reverse copy
About the steps that follow
If the document glass is being used, see page 23.
If the RSPF is being used, see page 24.
If the document glass is being used, see page 23.
If the RSPF is being used, see page 24.
To cancel the B/W reverse copy function,
touch the [B/W REVERSE] key in the special
modes screen. (The key will no longer be
highlighted.) (See the screen of step 1.)
touch the [B/W REVERSE] key in the special
modes screen. (The key will no longer be
highlighted.) (See the screen of step 1.)
OVER
B/W
REVERSE
Note
MX-M310.book 51 ページ ２００９年８月７日 金曜日 午後１時１０分
52
CONVENIENT COPY FUNCTIONS
CARD SHOT
The front and back of a card can be copied onto one sheet of paper.
This function is convenient for making copies for certification purposes and helps save paper.
This function is convenient for making copies for certification purposes and helps save paper.
• Copying is only possible on standard size paper.
• The image cannot be rotated when using this
• The image cannot be rotated when using this
function.
1
Make sure that a suitable paper size is
selected, or select another size using
the [PAPER SELECT] key.
selected, or select another size using
the [PAPER SELECT] key.
2
Touch the
key and then touch the
[CARD SHOT] key in the special
modes screen.
modes screen.
The CARD SHOT setting
screen will appear. A
card shot icon (
screen will appear. A
card shot icon (
) will
also appear in the upper
left corner of the screen
to indicate that the
function is turned on.
left corner of the screen
to indicate that the
function is turned on.
3
Enter the X dimension (width) and Y
dimension (length) of the original card
with the
dimension (length) of the original card
with the
keys.
• X (width) is initially selected. Enter X dimension
and then touch the Y (
) key to enter Y
dimension.
• To change the X or Y value back to the default
value, touch the [SIZE RESET] key. The default
values can be changed in the administrator
settings. (See "6. SYSTEM SETTINGS
(ADMINISTRATOR).)
values can be changed in the administrator
settings. (See "6. SYSTEM SETTINGS
(ADMINISTRATOR).)
• To have the images enlarged or reduced by a
suitable ratio based on the entered original size
so that the front and back sides fit into the
selected paper size, touch the [FIT TO PAGE]
key.
so that the front and back sides fit into the
selected paper size, touch the [FIT TO PAGE]
key.
4
Touch the outer [OK] key.
You will return to the
main screen of copy
mode.
main screen of copy
mode.
Original
Example:
Portrait
A4 (8-1/2" x 11")
size
Portrait
A4 (8-1/2" x 11")
size
Example:
Landscape
A4 (8-1/2" x 11")
size
Landscape
A4 (8-1/2" x 11")
size
Copy
Back of
card
Front of
card
CARD
CARD
CARD
EXPOSURE
AUTO A4
PAPER SELECT
100%
COVER
ORIGINAL
SIZE
CARD SHOT
SIZE RESET
CANCEL
OK
FIT TO
PAGE
SIZE RESET
CANCEL
OK
OK
FIT TO
PAGE
MX-M310.book 52 ページ ２００９年８月７日 金曜日 午後１時１０分
53
CONVENIENT COPY FUNCTIONS
3
5
Place the original on the document
glass.
glass.
Place the front side of the
original face down and
close the document
cover/RSPF.
original face down and
close the document
cover/RSPF.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
The front side of the card
is scanned.
is scanned.
7
Place the back side of the original
face down on the document glass.
face down on the document glass.
8
Press the [START] key (
).
The back side of the card
is scanned and copying
begins.
is scanned and copying
begins.
• The original must be placed on the
document glass. The RSPF cannot be
used.
used.
• Even when [FIT TO PAGE] is selected,
you can touch the [COPY RATIO] key in
the main screen of copy mode to manually
select the ratio.
the main screen of copy mode to manually
select the ratio.
• To cancel the card shot function, touch the
[CANCEL] key in the card shot setting
screen (the screen of step 4).
screen (the screen of step 4).
UT
LOGOUT
Note
MX-M310.book 53 ページ ２００９年８月７日 金曜日 午後１時１０分
54
4
Chapter 4
NETWORK SCANNER FUNCTION
INTRODUCTION
The network scanner expansion kit enables the machine to be used as a network scanner.
* Memory can be added by installing a commercially available 128 MB or 256 MB memory module (144-pin SDRAM
SODIMM). For more information, consult your dealer.
• To enable the network scanner function of this machine, a product key (password) must be entered using a
administrator setting. This is only required once. Use the "PRODUCT KEY" program to enter the product key. If
you do not know your product key, please ask your dealer. (For information on using administrator settings, refer
to "6. SYSTEM SETTINGS (ADMINISTRATOR)".)
you do not know your product key, please ask your dealer. (For information on using administrator settings, refer
to "6. SYSTEM SETTINGS (ADMINISTRATOR)".)
• The printer expansion kit (MX-PB12) and at least 128 MB of memory* are required to use the network scanner
function.
• For the procedures for using the software programs, see the user's guides on the CD-ROM.
MX-M310.book 54 ページ ２００９年８月７日 金曜日 午後１時１０分
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man11) service manuals if exist.