Sharp MX-M310 / MX-M310N (serv.man11) User Manual / Operation Manual ▷ View online
27
COPY FUNCTIONS
2
BYPASS FEED (special paper)
The bypass tray must be used to feed special papers such as transparency film and labels. The bypass tray can also
be used to feed standard copy paper.
be used to feed standard copy paper.
1
Place the original(s). (p.23, p.24)
2
Insert the paper (print face down) all
the way into the bypass tray.
the way into the bypass tray.
For paper that can be
used in the bypass tray,
see "PAPER" (p.16).
To load paper, see
"Loading paper in the
bypass tray" (p.19).
used in the bypass tray,
see "PAPER" (p.16).
To load paper, see
"Loading paper in the
bypass tray" (p.19).
3
Touch the [PAPER SELECT] key or
the tray in the image of the machine in
the touch panel, and select the bypass
tray.
the tray in the image of the machine in
the touch panel, and select the bypass
tray.
Set the type of paper that
you loaded in the bypass
tray. (p.21)
you loaded in the bypass
tray. (p.21)
4
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
Shifting the starting position of copying
When copying on a special size of paper in the bypass tray, the starting position of printing can be shifted vertically
for fine adjustment of the image position. To adjust the starting position of printing, follow the steps below. This
function can only be used when feeding special sizes of paper from the bypass tray.
for fine adjustment of the image position. To adjust the starting position of printing, follow the steps below. This
function can only be used when feeding special sizes of paper from the bypass tray.
1 Touch the [PAPER SELECT] key and then touch the [EXTRA
IMAGE ADJUST] key on the bypass tray.
2 Use the
key or
key to adjust the printing position, and
then touch the [OK] key.
• The position can be adjusted from -10 mm to +10 mm in 0.5 mm
(-0.5 inch to +0.5 inch in 0.02 inch) increments.
• When a setting from -10 mm to -0.5 mm (-0.5 inch to -0.02 inch) is
selected, the starting position of printing is moved to front from the
standard position. When a setting from +0.5 mm to +10 mm (+0.02
inch to +0.5 inch) is selected, the starting position of printing is moved to rear.
standard position. When a setting from +0.5 mm to +10 mm (+0.02
inch to +0.5 inch) is selected, the starting position of printing is moved to rear.
EXPOSURE
AUTO A4
PAPER SELECT
100%
UT
LOGOUT
READY TO COPY.
EXTRA IMAGE ADJUST
TO FRONT TO REAR
OK
0
(-10 10)
mm
mm
0.0
MX-M310.book 27 ページ 2009年8月7日 金曜日 午後1時10分
28
AUTOMATIC TWO-SIDED COPYING
Two originals can be automatically copied onto both sides of a single sheet of paper. When the RSPF is used,
two-sided copies of two-sided originals can easily be made.
two-sided copies of two-sided originals can easily be made.
USING THE DOCUMENT GLASS
1
Place the original on the document
glass. (p.23)
glass. (p.23)
2
Touch the [2-SIDED COPY] key.
3
Touch the [One-sided to two-sided
copy] key.
copy] key.
4
Touch the [OK] key.
Original
→ Paper
Document glass
One-sided original
→
Two sides (
)
RSPF
One-sided original
→
Two sides
(
)
Two-sided original
→
Two sides
(
)
Two-sided original
→
One side
(
)
• Paper sizes that can be used are A5, B5, B5R, A4, A4R, B4, and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
8-1/2" x 14" and 11" x 17").
• When making two-sided copies on letterhead paper, place the side with the letterhead face down if using a
tray, or face up if using the bypass tray (This is the opposite of normal.).
• Automatic two-sided copying is not possible on thick paper, thin paper, labels, transparency film, envelopes, and
other special types of paper.
• Automatic two-sided copying can be disabled in the administrator settings. (See "6. SYSTEM SETTINGS
(ADMINISTRATOR)".)
• When dual page copy (p.44) is selected, two-sided original to two sides or two-sided original to one side cannot be used.
Note
OUTPUT
2-SIDED COPY
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE]
After [BINDING CHANGE]
Touch the [BINDING CHANGE] key when making the tablet
binding, or when making automatic two-sided copies of a
one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size portrait
original, touch the [BINDING CHANGE] key.
binding, or when making automatic two-sided copies of a
one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size portrait
original, touch the [BINDING CHANGE] key.
BINDING
CHANGE
OK
MX-M310.book 28 ページ 2009年8月7日 金曜日 午後1時10分
29
COPY FUNCTIONS
2
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
The original for the front
side is scanned.
side is scanned.
7
Remove the first original and then place
the original for the back side on the
document glass. Close the RSPF and
then press the [START] key (
the original for the back side on the
document glass. Close the RSPF and
then press the [START] key (
).
To cancel automatic
two-sided copying, press
the [CLEAR] key ( ).
two-sided copying, press
the [CLEAR] key ( ).
USING THE RSPF
1
Place the original(s) in the document
feeder tray. (p.24)
feeder tray. (p.24)
2
Touch the [2-SIDED COPY] key.
3
Touch the desired copy mode.
4
Touch the [OK] key.
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
EXPOSURE
AUTO A4
PAPER SELECT
100%
UT
LOGOUT
When making two-sided copies of an odd
number of originals, touch the [READ-END]
key after scanning the last original.
number of originals, touch the [READ-END]
key after scanning the last original.
Note
OUTPUT
2-SIDED COPY
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE]
After [BINDING CHANGE]
Touch the [BINDING CHANGE] key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
BINDING
CHANGE
OK
EXPOSURE
AUTO A4
PAPER SELECT
100%
UT
LOGOUT
MX-M310.book 29 ページ 2009年8月7日 金曜日 午後1時10分
30
EXPOSURE ADJUSTMENT
SELECTING THE ORIGINAL IMAGE TYPE AND
MANUALLY ADJUSTING THE EXPOSURE
MANUALLY ADJUSTING THE EXPOSURE
[AUTO] is selected by default for automatic adjustment of the exposure according to the original. If you wish to
specify the original image type or manually adjust the exposure, place the original in the RSPF or on the document
glass, check the paper size, and then perform the following steps.
specify the original image type or manually adjust the exposure, place the original in the RSPF or on the document
glass, check the paper size, and then perform the following steps.
1
Touch the [EXPOSURE] key.
2
Select [TEXT], [TEXT/PHOTO], or
[PHOTO] as appropriate for the
original.
[PHOTO] as appropriate for the
original.
Selecting the original image type
• Three original image type selections are available.
• Automatic exposure adjustment can only be selected
when [TEXT] is selected for the original image type.
3
Manually adjust the copy exposure.
If [TEXT] was selected
for the original image
type, touch the [AUTO
for the original image
type, touch the [AUTO
MANUAL] key to
select [MANUAL] and
then adjust the copy
exposure.
then adjust the copy
exposure.
Touch the
key to make darker copies.
Touch the
key to make lighter copies.
To change back to automatic exposure adjustment,
follow these steps:
1 Touch the [EXPOSURE] key.
2 Touch the [TEXT] key.
follow these steps:
1 Touch the [EXPOSURE] key.
2 Touch the [TEXT] key.
The [AUTO
MANUAL] key appears when [TEXT]
is selected.
3 Touch the [AUTO
MANUAL] key so that
[AUTO] is highlighted.
4 Touch the [OK] key.
4
Touch the [OK] key.
You will return to the main screen of copy mode.
5
Check the paper size, select the
number of copies and any other
desired copy settings, and then press
the [START] key (
number of copies and any other
desired copy settings, and then press
the [START] key (
).
6
TEXT
Use for regular text, blueprints,
and light pencil writing.
and light pencil writing.
TEXT/PHOTO
Use for mixed text/photo originals
and printed photos.
and printed photos.
PHOTO
Use for photos and when you
desire clearer halftones.
desire clearer halftones.
AUTO
EXPOSURE
AUTO A4
0
AUTO
ORIGINAL IMAGE TYPE
PHOTO
TEXT/PHOTO
TEXT
1
3
Exposure value guidelines
1 - 2 Dark originals like newspapers
3
3
Normal originals
4 - 5 Light coloured text or text written in
pencil
AUTO
MANUAL
1
3
5
Note
UT
LOGOUT
MX-M310.book 30 ページ 2009年8月7日 金曜日 午後1時10分
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man11) service manuals if exist.