Sharp MX-M182 / MX-M182D (serv.man4) Service Manual ▷ View online
MX-M232D (AR-D36/D37) 5 - 3
• The machine (1-tray model) + 2x250-sheet paper feed unit
• The machine (2-tray model) + 2x250-sheet paper feed unit
7) Remove the connection gear lock.
Remove the connection gear lock (with the red tug) after setting.
8) Connect the connector
Connect the optional relay harness contained in the 1-tray model (2-tray
model) paper feed unit to the PWB of the machine.
model) paper feed unit to the PWB of the machine.
• Optional relay harness
• The machine (1-tray model) + 250-sheet paper feed unit
MX-M232D (AR-D36/D37) 5 - 4
• The machine (2-tray model) + 250-sheet paper feed unit
• The machine (1-tray model) + 2x250-sheet paper feed unit
• The machine (2-tray model) + 2x250-sheet paper feed unit
Note: When connecting the harness, tighten the earth wire together.
9) Remove the cassette packing fixtures.
Pull the cassette until it stops.
Turn and remove the packing lock fixture which is fixing the paper pres-
sure plate inside the cassette in the direction of arrow.
sure plate inside the cassette in the direction of arrow.
MX-M232D (MX-FX13/XB17) 6 - 1
[6] MX-FX13/MX-XB17
1. Unpacking
<Before installation>
• For improvement of workability, some description in this manual as
well as components and accessories may change without prior notice.
In this case, refer to the service manual.
A. MX-FX13
B. MX-XB17
2. Installation (MX-FX13 and MX-XB17)
1) Remove the rear cabinet.
Remove screws. Remove the rear cabinet and the rear cabinet cover.
Remove screws. Remove the rear cabinet and the rear cabinet cover.
2) Connect the bundled AC harness to the power PWB of the
machine.
Note: Connect the connector with the insulation tube of the AC harness
to the power PWB of the machine.
Parts included
FAX Expansion Unit: 1
line cable: 1
FAX keyboard: 1
Screws (S tight): 4
Writing label:4
Line Adapter: 1
(Australia/
New Zealand only)
(Australia/
New Zealand only)
FCC label: 1
(USA/Canada only)
A-TICK label: 1
(Australia/
New Zealand only)
(USA/Canada only)
A-TICK label: 1
(Australia/
New Zealand only)
Screws (S tight): 6
(Taiwan/Brazil/
South Africa only)
(Taiwan/Brazil/
South Africa only)
FAX power harness: 1
Ferrite Core: 2
(Taiwan/Brazil/
South Africa only)
(Taiwan/Brazil/
South Africa only)
Parts included
FAX Mounting Unit: 1
USB holder: 1
Rear cabinet cover: 1
USB Expansion harness: 1
Screws (S tight): 4
AC harness: 1
(Taiwan/Brazil/
South Africa only)
(Taiwan/Brazil/
South Africa only)
AC harness: 1
Turn off the main switch of the machine and then remove the power
plug of the machine from the outlet.
plug of the machine from the outlet.
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(3)
(4)
MX-M232D (MX-FX13/XB17) 6 - 2
3) Remove the USB devise connector PWB.
<1>Remove one screw.
<2>Remove the USB device connector PWB Unit.
<3>Remove the screw and remove the USB devise connector PWB.
<1>Remove one screw.
<2>Remove the USB device connector PWB Unit.
<3>Remove the screw and remove the USB devise connector PWB.
4) Attach the USB device connector PWB to USB holder, which is
included FAX Mounting kit, using the removed screw.
5) Install FAX Mounting Unit.
<1>Hook the attaching parts of FAX Mounting Unit onto the machine
<1>Hook the attaching parts of FAX Mounting Unit onto the machine
frame.
<2>Secure the unit onto the machine using 4 screws.
<3>Connect the AC harness, which is connected to the power PWB in
<3>Connect the AC harness, which is connected to the power PWB in
the machine, to the FAX mounting Unit. Connect USB expansion
harnesses to MCU PWB.
harnesses to MCU PWB.
6) Connect the FAX power harness.
7) Attach the USB holder.
<1>Slide up the USB holder and secure the unit using a screw.
<2>Connect the USB Expansion harness, fix the FAX mounting Unit.
<1>Slide up the USB holder and secure the unit using a screw.
<2>Connect the USB Expansion harness, fix the FAX mounting Unit.
(3)
(2)
(1)
(1)
(2)
(2)
(2)
(3)
(4)
(2)
(2)
(1)
Click on the first or last page to see other MX-M182 / MX-M182D (serv.man4) service manuals if exist.