DOWNLOAD Sharp MX-M182 / MX-M182D (serv.man4) Service Manual ↓ Size: 4.28 MB | Pages: 40 in PDF or view online for FREE

Model
MX-M182 MX-M182D (serv.man4)
Pages
40
Size
4.28 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual Updated December 2013.
File
mx-m182-mx-m182d-sm4.pdf
Date

Sharp MX-M182 / MX-M182D (serv.man4) Service Manual ▷ View online

INSTALLATION MANUAL
Parts marked with “
“ are important for maintaining the safety of the set. 
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
MX-M232D
MX-M202D
MX-M182D
MX-M182
(With optional SPF/RSPF installed)
(With optional SPF/RSPF installed)
DIGITAL MULTIFUNCTIONAL 
SYSTEM
    MX-M182
    MX-M182D
    MX-M202D
    MX-M232D
CODE : 00ZMXM182/I2E
MODEL
[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 2 ] CONFIGURATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[ 3 ] MX-M232D/MX-M202D/MX-M182D/MX-M182 . . . . . . . . . . . . . . 3-1
[ 4 ] AR-SP10/AR-RP10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[ 5 ] AR-D36/AR-D37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[ 6 ] MX-FX13/MX-XB17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[ 7 ] MX-NB12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[ 8 ] MX-TR10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[ 9 ] MX-EB14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] MX-PK10 PS3 EXPANSION KIT . . . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] CHANGING THE COPY PAPER SIZE IN THE TRAY. . . . . . . .  11-1
[12] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
CONTENTS
Disconnect the AC cord before servicing the unit.
LASER WAVE - LENGTH : 785
15mm
Pulse times : 10.34
Ǵsr0.1Ǵs/7mm㧧MX-M182,MX-M182D,MX-M202D
8.665
Ǵsr0.1Ǵs/7mm㧧MX-M232D
Out put power : Max.0.3mW
MX-M232D  (GENERAL) 1 - 1
[1] GENERAL
1. Note for servicing
Pictogram
The label (
 
) in the fusing area of the machine indicates the 
following:
 : Caution, risk of danger
 : Caution, hot surface
A. Warning for servicing
•The fusing area is hot. Exercise care in this area when removing misfed 
paper.
•Do not disassemble the laser unit. Do not insert a reflective material 
such as a  screwdriver in the laser beam path.
 
It may damage eyes by reflection of laser beams.
B. Cautions for servicing
•Do not switch the machine rapidly on and off. After turning the machine 
off, wait 10 to 15 seconds before turning it back on.
•Machine power must be turned off before installing any supplies.
•Place the machine on a firm, level surface.
•Do not install the machine in a humid or dusty location.
•When the machine is not used for a long time, for example, during 
prolonged holidays, turn the power switch off and remove the power 
cord from the outlet.
•When moving the machine, be sure to turn the power switch off and 
remove the power cord from the outlet.
•Do not cover the machine with a dust cover, cloth or plastic film while 
the power is on. Doing so may prevent heat dissipation, damaging the 
machine.
•Use of controls or adjustments or performance of procedures other than 
those specified herein may result in hazardous laser radiation 
exposure.
•The socket-outlet shall be installed near the machine and shall be easily 
accessible.
C. Note for installation place
Improper installation may damage the machine. Please note the 
following during initial installation and whenever the machine is moved.
Caution : If the machine is moved from a cool place to a warm place, 
condensation may form inside the machine. Operation in this 
condition will cause poor copy quality and malfunctions. Leave 
the machine at room temperature for at least 2 hours before 
use.
Do not install your machine in areas that are:
•damp, humid, or very dusty
•poorly ventilated
•exposed to direct sunlight
•subject to extreme temperature or humidity changes, e.g., near an air 
conditioner or heater.
The machine should be installed near an accessible power outlet for 
easy connection and disconnection.
Be sure to connect the power cord only to a power outlet that meets the 
specified voltage and current requirements. Also make certain the outlet 
is properly grounded.
Note : Connect the machine to a power outlet which is not used for other 
electric appliances. If a lighting fixture is connected to the same 
outlet, the light may flicker.
Be sure to allow the required space around the machine for servicing 
and proper ventilation.
20 cm 
(8")
20 cm 
(8")
20 cm (8")
MX-M232D (GENERAL) 1 - 2
D. Note for handling PWB and electronic parts
When handling the PWB and the electronic parts, be sure to observe the 
following precautions in order to prevent against damage by static 
electricity.
1) When in transit or storing, put the parts in an anti-static bag or an anti-
static case and do not touch them with bare hands.
2) When and after removing the parts from an anti-static bag (case), use 
an earth band as shown below:
• Put an earth band to your arm, and connect it to the machine.
3) When repairing or replacing an electronic part, perform the procedure 
on an anti-static mat.
Page of 40
Display

Sharp MX-M182 / MX-M182D (serv.man4) Service Manual ▷ Download

  • DOWNLOAD Sharp MX-M182 / MX-M182D (serv.man4) Service Manual ↓ Size: 4.28 MB | Pages: 40 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp MX-M182 / MX-M182D (serv.man4) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-M182 / MX-M182D (serv.man4) Copying Equipment. Information contained in Sharp MX-M182 / MX-M182D (serv.man4) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.