Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual ▷ View online
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 10
4) Fix Arm Cover Bottom (item No,16) with 1pc of screw. (Item
No.10 / M4×8 S-Tite).
Hook the pawl-shaped items on the metal plate of
the opponent side. (3 positions)
*Slide the cabinet from upper downward and hook the pawls to
assemble.
*Slide the cabinet from upper downward and hook the pawls to
assemble.
5) Fix Upper Cabinet Right Upper with 4pcs of screws. (Use the
screw (1) M4x8 S-Tite which is originally fixed)
6)
Fix Glass Fixer Right with 2pcs of screws. (Use the screw (2)
M4x6: XBTS740P06000 which is originally fixed)
M4x6: XBTS740P06000 which is originally fixed)
7)
Fix Right Cabinet Rear Middle (item No,15) with 1pc of screw.
(Item No.10 / M4×8 S-Tite)
(Item No.10 / M4×8 S-Tite)
Hook the pawl-shaped items on the holes of the
opponent side. (4 positions)
*Slide the cabinet from upper downward and hook to assem-
ble.
*Slide the cabinet from upper downward and hook to assem-
ble.
Ĭ
Ĭ
Ĭ
Ĭ
ĭ
ĭ
Glass
fixer right
Upper Cabinet Right Upper
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 11
Attach the operation panel
1) Install the Panel arm (Packed item No.2) by fixing the screws
(2: Packed item No.11, 3: Packed item No.10).
2) Put the Arm cover (Packed item No.3) temporarily as the figure
below.
3) Install the Panel (Packed item No.4) by fixing the screws
(Packed item No.10).
4)
Arrange the wire and fix the screw as the figure below.
Handle the connectors with care not to make dam-
age to the connector when connecting.
Connect the connectors vertically to the PWB.
When arranging the cable, never twist it.
Handle the connectors with care not to make dam-
age to the connector by snagging them when wiring.
Attach the bands of the harness of Operation Panel on the arm
(3 positions)
(3 positions)
ĭ
Į
Take out the harness for Operation Panel
from the packing.
from the packing.
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 12
Attach the bands of the harness for Operation Panel to the
arm. (2 positions)
arm. (2 positions)
5) Install the Arm cover (Packed item No.5) by fixing the screws
(Packed item No.10).
6)
Install the Upper arm cover (Packed item No.7) by fixing the
screws (Packed item No.14).
screws (Packed item No.14).
7)
Install the Arm cover by fixing the screws (Packed item No.14).
8)
Turn the operation panel to make the cabinet line straight and
Install the Arm cover R (Packed item No.7) as the figure below.
Install the Arm cover R (Packed item No.7) as the figure below.
Fasten with earth terminal.
Fasten the earth line with screws.
Attach the bands of the harness for
Operation Panel to the arm. (2 positions)
Operation Panel to the arm. (2 positions)
Put the harness for Operation Panel
through the hole.
through the hole.
Connect the connectors.
(4 positions)
(4 positions)
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 13
9) Install the Upper arm cover (Packed item No.8) by fixing the
screw (Packed item No.10) and attach the screw cover
(Packed item No.9).
(Packed item No.9).
10) Install the Arm lower cover F (Packed item No.17) as the figure
below.
Hook the pawl-shaped items on the holes of the
opponent side. (2 positions)
11) Install the Arm lower cover R (Packed item No.18) by fixing the
screw (Packed item No.10).
Fit the rib-shaped item to the groove of the opponent
side. (2 positions)
12) Attach Upper Cabinet Front Right with 5pcs of screws.
((1) 2pcs of M3x6 machine screws, (2) 1pc of M3x10 P-Tite
screw, (3) 2pcs of M4x8 machine screw (black) which are fixed
originally.)
screw, (3) 2pcs of M4x8 machine screw (black) which are fixed
originally.)
Ĭ
Ĭ
ĭ
Į
Į
Click on the first or last page to see other MX-M1055 / MX-M1205 (serv.man2) service manuals if exist.