Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual ▷ View online
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 6
7) Remove the protection material and the caution label.
C. Included parts removal
1) Remove the included parts.
D. Included parts check
1)
Check to confirm that all the parts are provided.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Parts (key board) enclosed in the dot line are standard
parts for North America.
*They are optional parts for the other destinations.
parts for North America.
*They are optional parts for the other destinations.
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 7
4. Installation
A. Machine height and tilt adjustments
1)
Put the height adjuster plate (Packed items No.9 x4) under the
adjuster bolt at the bottom of the machine.
Turn the adjuster bolt to adjust the height and the tilt of the
machine.
adjuster bolt at the bottom of the machine.
Turn the adjuster bolt to adjust the height and the tilt of the
machine.
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
NOTE: Lower the height of the MX-CF11 to the lowest position
before adjusts the level between the MX-CF11 and the
main body.
Adjust the height of the top surface of main body refer-
ence to the top surface of the MX-CF11.
main body.
Adjust the height of the top surface of main body refer-
ence to the top surface of the MX-CF11.
B. Lock release
(1) Scanner (2/3 mirror unit) lock release
1)
Remove the scanner lock screw (a) and the caution label (b).
No.
Name
Quantity
1
Height adjuster plate
4
2
Panel arm
1
3
Arm cover A
1
4
Operation panel
1
5
Arm cover B
1
6
Upper arm cover B
1
7
Arm cover R
1
8
Upper arm cover
1
9
Screw cover
1
10
M4X8 S-Tight
22
11
Step screw
1
12
Operation manual
1
13
Panel support UN
1
14
Right cabinet rear middle
1
15
Right cabinet rear middle
1
16
Arm cover bottom
1
17
Upper left arm cover
1
18
Arm cover upper
1
19
Key board cushion
1
20
Key board support plate UN
1
21
Operation cover A
1
22
Hinge cover
1
23
Key board UN
1
24
Panel cover B
1
25
Hinge fixing cabinet
1
26
M3 x 8 P-Tite
1
27
M3 x 6 S-Tite
5
28
M4 x 8 S-Tite
9
Low
High
a
b
1
: ‘16/Mar.
1
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 8
(2) Tray rotation plate lock release
1) Pull out trays 1 and 2, and remove the rotating plate lock screw
(a) and the tray caution label (b).
2) Pull out trays 3 and 4, and remove the rotating plate fixing
material (a) and the tray caution label (b). Remove the blue
screw (c) from the tray 3 only.
screw (c) from the tray 3 only.
C. Label attachment
1) Attach the document scan section label to the top of the DSPF
unit.
2)
Attach the Power supply careful label to the back of cabinet
(* Only for Europe)
(* Only for Europe)
a
a
a
a
b
b
b
a
c
b
c
Type
Name
Language
A
Power supply careful label EU-A
Portuguese/Italian
B
Power supply careful label EU-B
Dutch/Swedish
C
Power supply careful label EU-C
Norwegian/Finnish
D
Power supply careful label EU-D
Danish/Icelandic
E
Power supply careful label EU-E
Czech/Polish
F
Power supply careful label EU-F
Hungarian/Greek
G
Power supply careful label EU-G
Turkish/Slovak
H
Power supply careful label EU-H
Latvian/Romanian
I
Power supply careful label EU-I
Slovene/Croatian
J
Power supply careful label EU-J
Estonian/Lithuanian
K
Power supply careful label EU-K
Bulgarian
1
: ‘16/Mar.
1
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 9
D. Installation of operation panel unit
(Attention: Instal keyboad unit before Instration of operation panel)
1) Remove the following 7pcs of screws and slide Upper Cabinet
1) Remove the following 7pcs of screws and slide Upper Cabinet
Right Upper. (It need not be removed completely.)
(Special Instruction)
If the keyboard is attached (standard for N.A. and option for
Europe), this procedure has already been implemented in the
keyboard installation procedure (previous sheet) which is per-
formed in advance.
(Special Instruction)
If the keyboard is attached (standard for N.A. and option for
Europe), this procedure has already been implemented in the
keyboard installation procedure (previous sheet) which is per-
formed in advance.
2) Fix Panel Support UN (item No,14) with 5pcs of screws. (item
No,10 M4×8 S-Tite)
Hook the pawl-shaped items on the holes. (2 posi-
tions)
3)
Fix Right Cabinet Rear Middle with 1pc of screw (Item No.10 /
M4×8 S-Tite).
M4×8 S-Tite).
Hook the pawl-shaped items on the holes. (6 posi-
tions)
*Slide the cabinet from below upward and hook the pawls to
assemble.
*Slide the cabinet from below upward and hook the pawls to
assemble.
Glass
fixer right
Upper Cabinet Right Upper
Upper Cabinet Right Upper
Click on the first or last page to see other MX-M1055 / MX-M1205 (serv.man2) service manuals if exist.