Sharp MX-FXX1 (serv.man2) Service Manual ▷ View online
MX-FXX1 SPECIFICATIONS 2 – 2
2. Image send function
A. Image send function
(1) Mode
(2) System environment
(3) Image send function (Push send from the main
unit)
a. Support image
b. Image processing
c. Specification of Addresses
*1: Except for FTP, Desktop, SMB, USB memory, Broadcast.
*2: When disabled, the address registration is not allowed either.
*2: When disabled, the address registration is not allowed either.
d. Specification of Multiple Addresses
* Broadcast transmission is allowed. (Monochrome only)
Receive
function
function
Transfer function
Available
Number of registration: 1
item
Number of registration: 1
item
Specified receive function
Available
(Number of registration)
Rejection numbers: Max.50
items
(Number of registration)
Rejection numbers: Max.50
items
Receive data print condition
function
function
Available
Receive data staple setting/
Copy number setting
Copy number setting
Available
Rotation receive
Available
Output by clockwise rotation
of 90 degrees
Output by clockwise rotation
of 90 degrees
Divided receive
Available
Divided print is not made in
duplex mode.
Divided print is not made in
duplex mode.
Duplex receive
Available
F-code confidential receive
Available
Special
function
function
Print hold
Available
Document Admin
Available
Inbound Routing
Available
Sender registration function
Available
Sender print function
Available
On-hook dialing function
Available
Retransmit function
Available
Pause function
Available
Pause time is 1 – 15 sec.
Pause time is 1 – 15 sec.
Sound volume setting
function
function
Available
Tone pulse select function
Available (10PPS, 20PPS,
Tone, Auto)
Tone, Auto)
External phone connection
Available
Memory remaining capacity
check function
check function
Available
Only the integral part is
displayed.
Only the integral part is
displayed.
Back up
Available
Registered data read/write
function
function
Available
Report/List
Available
Destination check function
Available
Broadcasting destination
display function
display function
Available
Transmit job change function
Available
Save-energy function
Available
Line monitor display function
Available
FAST
Available
Facsimile Automated Service
Technology
Facsimile Automated Service
Technology
Time adjust function
Available
Summer time ON/OFF
Summer time ON/OFF
PC-FAX
Available
Color mode
Not available
Receive
function
function
Sender registration function
Available
Number of registration: 1 for
standard sender, Max. 200
for other users
Number of registration: 1 for
standard sender, Max. 200
for other users
Default destination setting
Not available
Unauthorized scan
prevention function
prevention function
Available
Filing-each-page function
Not available
Re-operation function
Available
User account function
Available
Max. 200 items additionally
to the default
Max. 200 items additionally
to the default
Counter function
Available
Simple ACR function
Available
FAX
FAX to e-mail/FTP
Copier memory
(Local memory)
Printer memory
(System Memory)
Data saving
destination
Fax
768MB
(Standard)
(Standard)
384MB (Standard)
(G model)
640MB (Standard)
(N model)
(G model)
640MB (Standard)
(N model)
8MB
Mode
FAX
Compression method
MH, MR, MMR, JBIG
Mode
FAX
Original scanning color
B/W
Halftone reproduction
Equivalent of 256 steps
Density adjustment
Auto + 5 steps
Selection of image quality
Half tone (Black-white only) ON/OFF
Resolution (depends on file
format/transmission method)
format/transmission method)
Standard character (203.2 x 97.8dpi)
(half tone not allowed)
Fine (203.2 x 195.6dpi)
Super fine (203.2 x 391dpi)
Ultra fine (406.4 x 391dpi)
(half tone not allowed)
Fine (203.2 x 195.6dpi)
Super fine (203.2 x 391dpi)
Ultra fine (406.4 x 391dpi)
Mode
FAX
Address specification
Specification by one-touch/group/
direct address entry.
Entry from soft keyboard. (Scanner/
Internet Fax)
Entry from 10-key. (Fax)
Selection from LDAP server
direct address entry.
Entry from soft keyboard. (Scanner/
Internet Fax)
Entry from 10-key. (Fax)
Selection from LDAP server
Number of One-touch address key
registration
registration
Total (number of key): Maximum 999
Number of Group (1 key) address
registtation
registtation
Number of Group (1 key) address
registration : maximum 500
Number of Group key registration :
5000 (Total address number included
in /999 key)
registration : maximum 500
Number of Group key registration :
5000 (Total address number included
in /999 key)
Program
48
Direct entry of addresses
Entry by 10-key, # key
Chain dial
Yes (pause key)
Resend
Call up nearest 8 addresses. *1
Shortcut for address selection
(quick key)
(quick key)
Use the 10-key to call up registered
numbers of addresses.
numbers of addresses.
Sender name
---
(Selection from the list of default + 18
addresses as sender name)
(Selection from the list of default + 18
addresses as sender name)
Disable direct entry transmission
*2
*2
Yes
Disable PC- Fax sending
Yes
Disable Internet Fax sending
Yes
Mode
FAX
Broadcast
Yes (500 destinations)
Request of serial transmission
Yes
MX-FXX1 SPECIFICATIONS 2 – 3
e. Transmission function
f. Reception function
*1: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.)
Setting only on the reciver side.
Setting only on the reciver side.
g. Report/list function
h. Other Functions
* This function means that e-mail address setteing on F code relay
broadcast allowed.
FAX
Memory transmission
94 destinations in all
On-hook
Yes
Quick online transmission
Yes
Direct transmission
Yes
(Switching: Memory transmission
(Switching: Memory transmission
↔
Direct transmission)
Automatically-reduced
transmission
transmission
Yes
Rotated transmission
Yes
Scaled transmission
Yes
Enlargement/reduction is allowed
only from a fixed size to another.
Reduction may be done on the
receiver side with Fax/Internet Fax
sending.
Enlargement/reduction is allowed
only from a fixed size to another.
Reduction may be done on the
receiver side with Fax/Internet Fax
sending.
Recall mode
Error
Yes
Busy
Yes
Number/time to be set up through
system setup
Number/time to be set up through
system setup
Long original transmission
Yes
Maximum of 800mm (single side
only/black-white 2 values only)
Maximum of 800mm (single side
only/black-white 2 values only)
Confidential transmission (Sharp
mode)
mode)
No
Relay broadcast transmission
(Sharp mode)
(Sharp mode)
No
Large capacity original mode
Yes
Scanning of thin paper
Yes
Mixed originals feeder
Yes (Random + MIX)
Default date sender transmission
Yes (ON only)
FAX
Automatic reception
Yes
Manual reception
No
Switching from manual reception to
automatic reception. (Allowed only
for SEF and Japan)
Switching from manual reception to
automatic reception. (Allowed only
for SEF and Japan)
Memory reception
Yes
Fixed size reduced reception
Yes
Specified size scaled reception
No
Rotated reception
Yes
Setting of received data print
condition
condition
Equal size print (partition not
allowed)
Equal size print (partition allowed)
Equal or reduced size print
allowed)
Equal size print (partition allowed)
Equal or reduced size print
2-sided reception
Condition setting through system
setting
setting
2-in-1 reception
No
Automatic reduction setting upon
receiving A3
receiving A3
Yes
Automatic reduction setting upon
receiving letter
receiving letter
Yes
Reception from a specific number
not allowed. (To be rejected)
not allowed. (To be rejected)
Specified numbers only (50 numbers
/20 digits)
/20 digits)
External phone connection
remote
remote
Yes
Confidential reception (Sharp
mode)
mode)
No
Received data bypass output
Yes
Index printing
No
Transfer function upon disabling
of output.
of output.
Yes (1 receiver (of transfer)
registration)
registration)
Internet Fax/Fax to e-mail
(Transfer of Internet Fax/Fax
reception data to e-mail, inbound
routing)
(Transfer of Internet Fax/Fax
reception data to e-mail, inbound
routing)
Yes
Exit tray setting
Yes
Insertion of job separator sheet
No
Staple function of received data
Yes
Auto wake up print
Yes
Received data print hold *1
Yes
Color toner print when black toner
runs out.
runs out.
No
Fax response lamp
Yes
FAX
Image sending activity report
Yes
Time-specified output
Output with memory full
* Maximum of 200 times including
Time-specified output
Output with memory full
* Maximum of 200 times including
both transmission and reception
Transaction report
Yes
Address/phone number table
Yes
Group table
Yes
Program table
Yes
Memory box table (F code)
Yes
Communication original contents
print
Always print/Upon error/no print
List of rejected reception numbers
Yes
Table of control record for each
account
account
No
FAX
Time specification
Yes
Polling reception
Yes
Bulletin board transmission
Yes
Up to 100 registrations allowed with
bulletin board, confidential and relay
broadcast all combined. (Free area :
1 registration)
Setting of the number of
transmission: 1/no limit.
Up to 100 registrations allowed with
bulletin board, confidential and relay
broadcast all combined. (Free area :
1 registration)
Setting of the number of
transmission: 1/no limit.
Cover sheet function
No
Transmission message
No
Sender print
Yes
Sender selection
Yes
Page number print
Yes
Date print
Yes (Date can be expressed
alternatively)
alternatively)
Polling protection function
Yes
Page partition transmission
Yes
Page connection
No
Confidential (receiver unit)
Yes (F code method)
Relay broadcast instructions
Yes (F code method)
Fax to e-mail (F code) *
Yes
Edge erase
Yes
Center erase
Yes
2 in 1
Yes
Card shot
Yes (Equivalent or enlargement up to
the paper width. The maximum
enlargement is not allowed to exceed
400%)
the paper width. The maximum
enlargement is not allowed to exceed
400%)
Forward data transmission/
reception (Document Admin)
reception (Document Admin)
Yes
Data transmission by PC-Fax/PC-
Internet Fax is allowed, too.
Data transmission by PC-Fax/PC-
Internet Fax is allowed, too.
FAX
MX-FXX1 SPECIFICATIONS 2 – 4
i. Transmission Method
j. Record Size
k. F code communication
l. Registration-related settings
*1: Since scan/Internet Fax/Fax uses the common address book,
the number of addresses allowed for registration is the sum
total of all modes.
total of all modes.
*2: Quick key is the function to select an address based on the
registered number of each address within the book for address
selection. Users should be able to select a quick key number.
selection. Users should be able to select a quick key number.
m. Telephone functions
n. Sound settings
*1: Large/middle/small. Setup by system setting.
*2: Large/middle/small/no sound. Setup by system setting.
*3: PATTERN 1/2/3/4. Setup by system setting. Different sound
*2: Large/middle/small/no sound. Setup by system setting.
*3: PATTERN 1/2/3/4. Setup by system setting. Different sound
should be selectable for each of reception/transmission
success/transmission and reception error.
*4: Setup by system setting. 5 steps of 2.0 – 4.0 seconds.
*5: Setup by system setting. 2-steps setting for every 0.3 or
*5: Setup by system setting. 2-steps setting for every 0.3 or
0.7 second.
o. Others
Mode
FAX
Transmission time
2 seconds level (super G3/JBIG), 6
seconds level (G3 ECM)
seconds level (G3 ECM)
Modem speed
Automatic fall-back : 33.6kbps
→
2.4kbps
Intercommunication
Super G3/G3
Communication line
General membership telephone line
(PSTN), independent business line
(PBX), F net.
(R-key for PBX setting: SEGA/SEF)
(PSTN), independent business line
(PBX), F net.
(R-key for PBX setting: SEGA/SEF)
ECM
Yes
Mode
FAX
Maximum record width
293mm
Record size
A3 – A5/11 x 17 – 5.5 x 8.5
Mode
FAX
Sub-address
Yes (20 digits)
Password
Yes (20 digits)
Mode
FAX
One-touch/group *1
E-mail
FTP
Desktop
SMB
FAX
FTP
Desktop
SMB
FAX
999 destinations
Use of LDAP allowed
Up to 500 registered addresses for
each group dial.
Registered name in 18 full-size
character (36 half-size characters)
One-touch dial receiver number
registration: within 64 digits for
receiver number + sub-address +
passcode (including "/").
Use of LDAP allowed
Up to 500 registered addresses for
each group dial.
Registered name in 18 full-size
character (36 half-size characters)
One-touch dial receiver number
registration: within 64 digits for
receiver number + sub-address +
passcode (including "/").
Program
Registration of addresses (groups),
settings (density, image quality) and
special functions in one set is
allowed. (48 of them)
settings (density, image quality) and
special functions in one set is
allowed. (48 of them)
Number of memory boxes
Registration of bulletin board/
confidential/relay broadcast is
allowed up to 100.
Registration name: 18 characters
confidential/relay broadcast is
allowed up to 100.
Registration name: 18 characters
Number of sender registration
Line 1: 1 (default) with 20 characters
Line 2: 1 (default) with 20 characters
Line 2: 1 (default) with 20 characters
Number of sender selection
registration
registration
Total: 18 registrations (20 characters)
(Sender selection: In addition to
default, 18 registrations allowed)
(Sender selection: In addition to
default, 18 registrations allowed)
Registration of polling approval
number
number
10 numbers/20 digits
Registration of Fax system
number (Sharp mode)
number (Sharp mode)
No
Registration of Fax polling
approval ID number (Sharp
mode)
approval ID number (Sharp
mode)
No
Fax relay ID registration (Sharp
mode)
mode)
No
Quick key (short cut registration)
*2
*2
Yes (001 – 999)
Retrieving/scanning of registered
data to other model
data to other model
Yes (By address book conversion
utility)
utility)
Import/export of address book
Yes (By storage backup)
Black list (for SEF)
No
Mode
FAX
On-hook function
Yes
Hold
No
Setting of pause time
Yes (1 – 15 seconds)
Telephone transmission during
power outage
power outage
No (External telephone transmission
allowed)
allowed)
Tone pulse switching
Availability of setting (10/20/TONE/
auto detection) and their default
values are different depending on
destinations.
auto detection) and their default
values are different depending on
destinations.
Mode
Item
FAX
On-hook sound
Sound volume setting
Yes *1
Sound volume for calling
Sound volume setting
Yes *2
Line monitor sound
Sound volume setting
Reception sound
Sound volume setting
Sound pattern
Sound pattern
Yes *3
Transmission success sound
Sound volume setting
Yes *2
Sound pattern
Yes *3
Time setting for
communication ending
sound
communication ending
sound
Yes *4
Transmission and reception error
sound
sound
Sound volume setting
Yes *2
Sound pattern
Yes *3
Time setting for
communication ending
sound
communication ending
sound
Yes *5
Sound setting for end of original
reading (image send)
reading (image send)
Sound volume setting
Yes *1
Mode
FAX
PC-FAX
Yes
FAST
Yes (SEC only)
Network FAST
No
Distinctive ring detection
Setting for each destination
Forval 55 Fax
Yes
MX-FXX1 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 – 1
âºíuÇ´
Service Manual
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Operation panel
2. Touch panel of FAX mode
A. Base screen of FAX mode
This screen is used to select settings and operations in fax mode.
1
Touch panel
A message or a key is displayed on the LCD screen. Touch the displayed key with your finger to perform various
operations. When the displayed key is touched, a sound is generated and the selected item is highlighted to confirm.
operations. When the displayed key is touched, a sound is generated and the selected item is highlighted to confirm.
2
[IMAGE SEND] key
Press to switch to fax mode.
3
Numeric keys
Use to enter fax numbers and numerical settings.
4
[C] key (clear key)
Use to clear a mistake when entering fax numbers and numerical settings. One digit is cleared each time you press the key.
5
[
∗] key
This is used to produce tone signals when you are on a pulse dial line.
6
[CA] key (clear all key)
Use to cancel a transmission or programming operation. When this key is pressed, the operation is cancelled and you
return to the initial screen described on the following page.
This key is also used to cancel a resolution, paper size, or special function setting that was selected when sending a fax.
return to the initial screen described on the following page.
This key is also used to cancel a resolution, paper size, or special function setting that was selected when sending a fax.
7
[STOP] key
Press this key to stop scanning of an original.
8
[BLACK COPY START] key
Press to begin scanning an original for fax transmission.
DOCUMENT
FILING
IMAGE SEND
COPY
JOB STATUS
SYSTEM
SETTINGS
LOGOUT
PRINT
READY
DATA
DATA
LINE
DATA
DATA
5
3
4
2
1
6
8
7
Quick File
File
Special Modes
Sub Address
Speaker
Resend
Address
Book
Fax
Mode Switch
Image
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
Ready to send.
9
8
7
2
1
3
4
5
6
12
11
10
13
Click on the first or last page to see other MX-FXX1 (serv.man2) service manuals if exist.