DOWNLOAD Sharp MX-FXX1 (serv.man2) Service Manual ↓ Size: 4.79 MB | Pages: 80 in PDF or view online for FREE

MX-FXX1  SIMULATIONS, FAX SOFTWARE SWITCH  5 – 24

17

4

Rotated transmission 
selection (A5R 

→ A5)

Rotated transmission or not depending on orientation of the document.
When transmitting A5R document, this setting determines whether to 
transmit as A4 width (A5R) or to rotate the read image and transmit as 
A4 width (A5).
"0": Rotate
"1": Do not rotate

0

Rotate

FAX 
transmission 
setting

5

Rotated transmission 
selection 
(8.5 x 11 

→ 8.5 x 11R) 

Rotated transmission or not depending on orientation of the document.
When transmitting 8.5 x 11 (LTR) document, this setting determines 
whether to transmit as A3 width (8.5 x 11) or to rotate the read image 
and transmit as A4 width (8.5 x 11R).
"0": Rotate
"1": Do not rotate

0

Rotate

FAX 
transmission 
setting

6

Rotated transmission 
selection 
(16K 

→ 16KR) 

Rotated transmission or not depending on orientation of the document 
(16K

A4). 

When transmitting 16K document, this setting determines whether to 
transmit as A3 width (16K) or to rotate the read image and transmit as 
A4 width (16KR).
"0": Rotate
"1": Do not rotate

0

Rotate

FAX 
transmission 
setting

7

Rotated transmission 
selection (5.5 x 8.5R 

→ 

5.5 x 8.5)

Rotated transmission or not depending on orientation of the document 
(INVOICE

A5).

When transmitting 5.5 x 8.5R (INVOICE-R) document, this setting 
determines whether to transmit as A4 width (5.5 x 8.5R) or to rotate the 
read image and transmit as A4 width (5.5 x 8.5).
"0": Rotate
"1": Do not rotate

0

Rotate

FAX 
transmission 
setting

8

M Page number printing

Setting to determine whether or not to apply the page number (page 
number/total pages in cases of memory transmission) in the area for 
printing date and source.
"0": Apply
"1": Do not apply

0

Apply

FAX 
transmission 
setting

18

1

M Designation of date 

and source printing 
position

Set the position for applying the date and transmission source on the 
top of the document when transmitting it.
"0": Outside the document
"1": Within the document

0

Outside the document

FAX 
transmission 
setting

2

Quick online/Memory 
transmission 
changeover (quick 
online transmission)

Setting to determine whether to put transmission into the quick online 
transmission mode or the memory transmission mode.
"0": Quick online transmission
"1": Memory transmission

0

Quick online 
transmission

FAX 
transmission 
setting

3

Designation of date 
and source printing

Set whether or not to apply the date and transmission source on the top 
of the document when transmitting it.
"0": Apply
"1": Not apply
Not functionable in North America (always applied).

0

Apply

FAX 
transmission 
setting

4

Re-call permitted when 
busy

Set to re-call when the other party of a transmission is busy or does not 
call in.
"0": Prohibited
"1": Permitted

1

Permitted

FAX 
transmission 
setting

5-8

Number of re-calls 
when busy

Set the number of re-calls to be made when the other party of a 
transmission is busy or does not call in.
This can be set from 1 to 14 times by binary inputting. If 0 is set, the 
initial value of 2 times is adopted.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is 
set.

0

2  times

FAX 
transmission 
setting

0
1
0

MX-FXX1  SIMULATIONS, FAX SOFTWARE SWITCH  5 – 25

19

1-4

Interval between re-
calls when busy

Set the interval until the next re-call when the line is busy during 
transmission.
This can be set from 0 to 15 minutes in 1-minute increments by binary 
inputting. If 0 is set, the initial value of 3 minutes is adopted.
Re-call interval: Set value x 1 minute
The initial value is reverted to if a value outside of the setting range is 
set.

0

3 minutes (North 
America/Australia/
U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/China/
Singapore/Thailand/
Malaysia/India/
Philippine/Hong Kong/
Middle East/Slovakia/
Other3/Rusia/South 
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)

FAX 
transmission 
setting

0
1
1

0

4 minutes (Indonesia/
Taiwan)

1
0
0

5-8

Number of re-calls at 
times of 
communication error

Set the number of re-calls to be made when a communication error 
occurs during transmission.
This can be set from 1 time by binary inputting. If 0 is set, the initial 
value of 1 time is adopted.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is 
set.

0

1 time (North 
America/Australia/
U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/Middle 
East/Slovakia/Other3/
Rusia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)

FAX 
transmission 
setting

0
0
1

0

2 times (China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong 
Kong/Taiwan)

0
1
0

20

1-4

Re-call interval at 
times of 
communication error

Set the interval until the next re-call when communication error occurs.
This can be set from 1 to 15 minutes in 1-minute increments by binary 
inputting.
Number of recalls: Setting x once
The setting is from 1 to 15.
The initial value is reverted to if a value outside of the setting range is 
set.

0

"0011": 3 minutes 
(North America/
Australia/New 
Zealand)
"0001": 1 minute 
(U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
China/Singapore/
Thailand/Malaysia/
India/Philippine/Hong 
Kong/Taiwan/Middle 
East/Slovakia/Other3/
Rusia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"0100": 4 minutes 
(Indonesia)

FAX 
transmission 
setting

0
1
1

5

Re-call permitted at 
times of 
communication error

Set whether or not to re-call when a communication error occurs during 
transmission.
"0": Prohibited
"1": Permitted

1

Permitted

FAX 
transmission 
setting

MX-FXX1  SIMULATIONS, FAX SOFTWARE SWITCH  5 – 26

20

6

Automatic reduced 
printing to fixed sizes

If a size in excess of the valid printing area is received, this setting 
determines whether or not to automatically reduce size. If size is not 
reduced, the excessive area is discarded without being printed.
"0": Reduce
"1": Do not reduce (discard)
The reduction factor is set using the separate SW (Automatic reduction 
factor setting).

0

Reduction

FAX 
reception 
setting

7

Setting to reduce and 
discard when printing 
A3-11 x 17 (reduced 
printing setting when 
receiving A3)

Setting to determine whether to reduce to 11 x 17 inch size sheet or to 
print without reducing in cases of receiving A3 wide document when 11 
x 17 inch size sheet is set.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
When set to "Reduce," the overall data are reduced to 94%.

1

Do not reduce 
(discard)

FAX 
reception 
setting

8

Reduced print setting 
when receiving letters.

Setting to determine whether to reduce to A4 size sheet or to print 
without reducing in cases of receiving 8.5 x 11 (LTR) when A4 size 
sheet is set.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
When set to "Reduce," the overall data are reduced to 94%.

1

Do not reduce 
(discard)

FAX 
reception 
setting

21

1-4

M Setting of the number 

of automatic reception 
calls

 Set the number of call sounds until the start of receiving (holding of the 
line) when automatic reception is set.
This can be set from 0 to 15 times by binary inputting.
If 0 is set, the call sound will not be sounded. (However, this does not 
include the nighttime FAX mode.)

0

2  times

FAX 
reception 
setting

0
1
0

5

Double-faced printing 
of received data 
(double-faced 
reception setting)

Setting to determine whether received data are printed on both sides.
"1": Double-faced printing permitted
"0": Double-faced printing prohibited

0

Double-faced printing 
prohibited

FAX 
reception 
setting

6-7

Setting of received 
data print conditions

Setting for selecting the optimum sheet when printing data received by 
FAX.
"00": Equal magnification/Reduction permitted
"01": Equal magnification (division/reduction prohibited)
"10": Equal magnification/Division permitted
The initial value is reverted to if a value outside of the setting range is 
set.
Setting for selecting the optimum sheet when printing data received.

0

Equal magnification/
Reduction permitted

FAX 
reception 
setting

0

8

Designated number 
reception refusal 
setting (FAX)

Setting to determine whether or not to validate refusal of reception from 
designated numbers (FAX). However, only valid during automatic 
reception.
"0": Receipt of designated number is not refused (invalid)
"1": Receipt of designated number is refused (valid)
However, implement using a separate SW (setting to refuse reception 
at times of manual reception) when receiving manually.

0

Receipt of designated 
number is not refused 
(invalid)

FAX 
reception 
setting

22

1

FAX delivery tray 
setting 

Set the delivery tray at the destination of FAX data output.
"1": Right tray (without finisher attached) 
"0": Center tray (without finisher attached)
"1": Right tray (with finisher attached)
"0": Finisher tray (with finisher attached)

0

Center tray (without 
finisher attached)

FAX 
reception 
setting

Finisher tray (with 
finisher attached)

2

Not used

0

3

Staple setting

Set to determine whether or not to staple when outputting received FAX 
data.
"0": No
"1": Yes

0

No

Device 
setting

4-5

Staple position setting

With the finisher attached, set the staple position for when conducting 
stable output of FAX printed data.
"00": Rear 1 point
"01": Front 1 point
"10": Center 2 points
"11": Same action as initial value
The initial value is reverted to if a value outside of the setting range is 
set.

0

Rear 1 point

Device 
setting

0

6-7

Selection of delivered 
sheet size

Sheet size setting when conducting stable output of FAX/Internet FAX 
printed data with the finisher attached.
"00": A4 or A3 (8.5 x 11 or 11 x 17)
"01": B5 or B4 (8.5 x 11 or 8.5 x 14)
"10": A4 (8.5 x 11)
"11": A4R (8.5 x 11R)

0

A4  or  A3 
(8.5 x 11 or 11 x 17)

FAX 
reception 
setting

0

MX-FXX1  SIMULATIONS, FAX SOFTWARE SWITCH  5 – 27

22

8

Valid/Invalid setting of 
FAX A4, 8.5 x 11 
threshold

When printing received FAX data with A4 and 8.5 x 11 paper in the tray, 
this setting determines whether to make threshold values in paper 
selection valid or invalid. If made valid, it becomes easier to select 
letters.
"0": Valid
"1": Invalid
When printing received Internet FAX data, conduct setting using the 
separate SW (Valid/Invalid setting of Internet FAX A4, 8.5 x 11 
threshold).

0

Valid

23

1

M Setting for changing 

over to automatic 
reception during 
manual reception

Setting to determine whether or not to initiate automatic reception after 
the ringer sounds a certain number of times when manual reception is 
set.
"0": Prohibited (do not changeover)
"1": Permitted (changeover)

0

Prohibited

FAX 
reception 
setting

2-6

M Setting of the number 

of calls for changing 
over from manual to 
automatic reception

Set the number of calls before changing over to automatic reception 
when in the manual reception mode.
This functions when the "Setting for changing over to automatic 
reception during manual reception" (SW23-1) is valid.
Setting can be made over the range of 1 to 32 times by binary inputting.

0

9  times

FAX 
reception 
setting

1
0
0
0

7

Polling protection

Set to determine whether or not to execute protection when the other 
party requests polling.
"0": Protect
"1": Do not protect
When the protection setting is selected and a request for polling is 
received from the other party’s machine, bulletin board transmission is 
conducted if the source number of the other party coincides with the 
number permitted for polling.
When the setting not to protect is selected, bulletin board transmission 
is executed regardless of the source number of the other party.

0

Protect

Polling 
protection 
setting

8

Switch to sorting in 
order of numbers on 
the address list

Set to choose between the registered order or the search number order 
when neither upward nor downward selection is selected on the 
address book screen and address list.
"0": Search number order
"1": Registered number order

0

Search number order

24

1

M External telephone off-

hook warning

This sets whether or not to alarm the external telephone off-hook at  the 
end of a transmission.
"0": No alarm
"1": Alarm
This switch does not function in North America.
Hand-set always makes the off-hook alarm.
Functions of external telephone depends on TEL/LIU.

0

No alarm (North 
America/Australia/
New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong 
Kong/Taiwan/Middle 
East/Other3/Rusia)

1

Alarm (U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
Slovakia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)

2-3

Not used

1
0

4

M

0

5

0

6

M Scope of line sound 

monitor

Setting to determine the scope of monitoring when the line monitor 
function is used
When "Until NSF signal send/receive" is set, monitoring is conducted 
until the DCS or NSF signal is received. When "All" is set, everything is 
monitored until the line is disconnected.
"0": Until NSF signal send/receive
"1": All
Setting of line monitor sound ON/OFF is done by a separate SW.

0

Until NSF signal send/
receive

7-8

M Volume setting of call 

sound (large)

This sets the large (system setting) volume level of the call sound 
outputted from the speaker. This includes volume of BZ-related sounds 
(communication completion sound, communication error sound).
"00": Volume level 9
"01": Volume level 11
"10": Volume level 13
"11": Volume level 15

1

Volume level 13

0