Sharp MX-FXX1 (serv.man2) Service Manual ▷ View online
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 40
58
1-4
M Make time (20PPS)
setting
Setting of make time when dialing at 20PPS.
Make time can be set from 9 to 24ms by binary inputting N over the
range of 0 to 15 (N + 9ms).
Functions only in China and Thailand.
Make time can be set from 9 to 24ms by binary inputting N over the
range of 0 to 15 (N + 9ms).
Functions only in China and Thailand.
1
"1000": 17ms
(North America/
Australia/U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/
Singapore/Indonesia/
Malaysia/India/
Philippine/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1010": 19ms (China/
Thailand/Hong Kong)
(North America/
Australia/U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/
Singapore/Indonesia/
Malaysia/India/
Philippine/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1010": 19ms (China/
Thailand/Hong Kong)
Adjustment
value
value
0
0
0
0
0
5-8
M Break time setting
(20PPS)
Setting of break time when dialing at 20PPS.
Break time can be set from 26 to 41ms by binary inputting N over the
range of 0 to 15 (N + 26ms).
Functions only in China and Thailand.
Break time can be set from 26 to 41ms by binary inputting N over the
range of 0 to 15 (N + 26ms).
Functions only in China and Thailand.
0
"0111": 33ms (North
America/Australia/
U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/
Singapore/Indonesia/
Malaysia/India/
Philippine/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"0101": 31ms (China/
Thailand/Hong Kong)
America/Australia/
U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/
Singapore/Indonesia/
Malaysia/India/
Philippine/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"0101": 31ms (China/
Thailand/Hong Kong)
Adjustment
value
value
1
1
1
1
1
59
1-4
M Setting of DTMF send
level (high group)
This sets the send level of high area and low area DTMF signals in
units of 1dB.
Setting can be made over the range of 0dB to 15dB in 1dB increments
by binary inputting.
units of 1dB.
Setting can be made over the range of 0dB to 15dB in 1dB increments
by binary inputting.
0
"0101": 5dB (North
America/Slovakia/
Rusia/South Africa)
"0011": 3dB
(Middle East/Other3)
"0110": 6dB
(New Zealand/China/
Singapore/Thailand/
Philippine/Hong
Kong)
"0111": 7dB (U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/
Malaysia/Taiwan/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1000": 8dB
(Australia/Indonesia)
"1001": 9dB (India)
America/Slovakia/
Rusia/South Africa)
"0011": 3dB
(Middle East/Other3)
"0110": 6dB
(New Zealand/China/
Singapore/Thailand/
Philippine/Hong
Kong)
"0111": 7dB (U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/
Malaysia/Taiwan/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1000": 8dB
(Australia/Indonesia)
"1001": 9dB (India)
Adjustment
value
value
1
0
1
0
1
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 41
59
5-8
M Setting of DTMF send
level (low group)
High group - Low
group: level difference
High group - Low
group: level difference
This sets the difference between the DTMF signal high area level and
low area level in units of 0.5dB.
Setting can be made over the range of -2.0dB to 5.5dB in 0.5dB
increments by binary inputting.
High group - Low group
"0 0 0 0": -2.0dB
low area level in units of 0.5dB.
Setting can be made over the range of -2.0dB to 5.5dB in 0.5dB
increments by binary inputting.
High group - Low group
"0 0 0 0": -2.0dB
"1 0 0 0": 2.0dB
"0 0 0 1": -1.5dB
"1 0 0 1": 2.5dB
"0 0 1 0": -1.0dB
"1 0 1 0": 3.0dB
"0 0 1 1": -0.5dB
"1 0 1 1": 3.5dB
"0 1 0 0": 0.0dB
"1 1 0 0": 4.0dB
"0 1 0 1": 0.5dB
"1 1 0 1": 4.5dB
"0 1 1 0": 1.0dB
"1 1 1 0": 5.0dB
"0 1 1 1": 1.5dB
"1 1 1 1": 5.5dB
1
"1001": 2.5dB
(North America/
Slovakia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1000": 2.0dB
(New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3/Rusia)
"1010": 3.0dB
(Australia/U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria)
(North America/
Slovakia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1000": 2.0dB
(New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3/Rusia)
"1010": 3.0dB
(Australia/U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria)
Adjustment
value
value
0
0
1
0
1
60
1-8
Not used
0
61
1-8
M Setting of DTMF
minimum pause time
This sets the minimum pause time between DTMF signals when
sending DTMF signals.
Minimum pause time can be set by binary inputting N over the range of
0 to 255 (1ms x N).
Setting can be made over the range of 50ms to 255ms in 1ms
increments by binary inputting.
The initial value is reverted to if a value outside of the setting range is
set.
sending DTMF signals.
Minimum pause time can be set by binary inputting N over the range of
0 to 255 (1ms x N).
Setting can be made over the range of 50ms to 255ms in 1ms
increments by binary inputting.
The initial value is reverted to if a value outside of the setting range is
set.
0
"01111000": 120ms
(Other country)
"01100100": 100ms
(India)
(Other country)
"01100100": 100ms
(India)
Adjustment
value
value
1
1
1
1
0
0
0
1
1
1
0
0
0
62
1-5
M DTMF signal send time
This sets the time that DTMF signals are sent when sending DTMF
signals.
Send time can be set over the rage of 70 to 310ms in 10ms increments
by binary inputting N from 0 to 31 (110ms x N).
The initial value is reverted to if a value outside of the setting range is
set.
signals.
Send time can be set over the rage of 70 to 310ms in 10ms increments
by binary inputting N from 0 to 31 (110ms x N).
The initial value is reverted to if a value outside of the setting range is
set.
0
110ms
1
0
1
1
0
1
1
6
Not used
"0": North America/Australia/China/Singapore/Indonesia/Thailand/
Malaysia/India/Philippine/Hong Kong/Taiwan/Middle East/Other3/Rusia
"1": U.K./France/Germany/Sweden/Finland/Norway/Denmark/
Netherlands/Italy/Switcherland/Austria/New Zealand/Slovakia/South
Africa/Spain/Portuguese/Luxemburg/Belgium/Czech/Hungary/Greece/
Poland
Malaysia/India/Philippine/Hong Kong/Taiwan/Middle East/Other3/Rusia
"1": U.K./France/Germany/Sweden/Finland/Norway/Denmark/
Netherlands/Italy/Switcherland/Austria/New Zealand/Slovakia/South
Africa/Spain/Portuguese/Luxemburg/Belgium/Czech/Hungary/Greece/
Poland
0
7
M DPMUTE control
This sets whether or not to control the ports when sending the dial
pulse.
If the dial pulse dialing meets the difficulties, the setting must be
changed.
Functions only in Australia, New Zealand, U.K., France, Germany,
Sweden.
"0": OFF
"1": ON
pulse.
If the dial pulse dialing meets the difficulties, the setting must be
changed.
Functions only in Australia, New Zealand, U.K., France, Germany,
Sweden.
"0": OFF
"1": ON
0
OFF
8
M Busy tone OFF non-
detection time
This sets the non-detection time on the busy tone OFF section.
Change the setting in cases where noise, etc. on the busy tone ON
section adversely affects the ON section.
"0": 100ms
"1": 300ms
* Make shorter than the "busy tone OFF detection time."
Change the setting in cases where noise, etc. on the busy tone ON
section adversely affects the ON section.
"0": 100ms
"1": 300ms
* Make shorter than the "busy tone OFF detection time."
0
100ms
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 42
63
1-2
M Lower limit of busy
tone ON detection time
This sets the lower limit time of the ON section when detecting
frequency of the busy tone signal.
If busy tone signals are not detected in excess of this time, do not count
as 1 pulse.
"00": 250ms
"01": 140ms
"10": 450ms
"11": 350ms
frequency of the busy tone signal.
If busy tone signals are not detected in excess of this time, do not count
as 1 pulse.
"00": 250ms
"01": 140ms
"10": 450ms
"11": 350ms
0
250ms (North
America/Australia/
New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3)
America/Australia/
New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3)
0
0
140ms (U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
Slovakia/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
Slovakia/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
1
3-4
M Upper limit of busy
tone ON detection time
This sets the upper limit time of the ON section when detecting
frequency of the busy tone signal.
If busy tone signal is detected in excess of this time, do not count as 1
pulse.
"00": 750ms
"01": 650ms
"10": 1000ms
"11": 2850ms
frequency of the busy tone signal.
If busy tone signal is detected in excess of this time, do not count as 1
pulse.
"00": 750ms
"01": 650ms
"10": 1000ms
"11": 2850ms
0
750ms
(North America/U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/China/
Indonesia/Thailand/
Malaysia/Philippine/
Hong Kong/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
(North America/U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/China/
Indonesia/Thailand/
Malaysia/Philippine/
Hong Kong/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
0
1
1000ms (Australia/
Singapore/India)
Singapore/India)
0
5-6
M Lower limit of busy
tone OFF detection
time
time
This sets the lower limit time of the OFF section when detecting
frequency of the busy tone signal.
If busy tone OFF signals are not detected in excess of this time, do not
count as 1 pulse.
"00": 250ms
"01": 140ms
"10": 450ms
"11": 350ms
frequency of the busy tone signal.
If busy tone OFF signals are not detected in excess of this time, do not
count as 1 pulse.
"00": 250ms
"01": 140ms
"10": 450ms
"11": 350ms
0
250ms (North
America/Australia/
New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3)
America/Australia/
New Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3)
0
0
140ms (U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
Slovakia/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
Slovakia/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
1
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 43
63
7-8
M Upper limit of busy
tone OFF detection
time
time
This sets the upper limit time of the OFF section when detecting
frequency of the busy tone signal.
If busy tone signal is detected in excess of this time, do not count as 1
pulse.
"00": 750ms
"01": 650ms
"10": 1000ms
"11": 2850ms
frequency of the busy tone signal.
If busy tone signal is detected in excess of this time, do not count as 1
pulse.
"00": 750ms
"01": 650ms
"10": 1000ms
"11": 2850ms
0
750ms
(North America/
Australia/U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/China/
Indonesia/Thailand/
Malaysia/Philippine/
Hong Kong/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
(North America/
Australia/U.K./France/
Germany/Sweden/
Finland/Norway/
Denmark/
Netherlands/Italy/
Switcherland/Austria/
New Zealand/China/
Indonesia/Thailand/
Malaysia/Philippine/
Hong Kong/Taiwan/
Middle East/Slovakia/
Other3/Rusia/South
Africa/Spain/
Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
0
1
1000ms
(Singapore/India)
(Singapore/India)
0
64
1-4
Not used
0
0
0
0
0
0
0
5-8
M Call signal OFF non-
detection time
This sets the time for ignoring OFF signals and regarding ON time to be
continuous following ON detection of the call signal (CI).
This is intended to treat the PBX call signal "ring-ring" as a single call
signal.
Setting can be made over the range of 0ms to 1500ms in 100ms
increments by binary inputting.
continuous following ON detection of the call signal (CI).
This is intended to treat the PBX call signal "ring-ring" as a single call
signal.
Setting can be made over the range of 0ms to 1500ms in 100ms
increments by binary inputting.
0
"0110": 600ms (North
America/Australia/
Taiwan/Middle East/
Other3/Rusia)
"0100": 400ms (U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/
China/Singapore/
Indonesia/Thailand/
Malaysia/India/
Philippine/Hong Kong/
Slovakia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1010": 1000ms
(New Zealand)
America/Australia/
Taiwan/Middle East/
Other3/Rusia)
"0100": 400ms (U.K./
France/Germany/
Sweden/Finland/
Norway/Denmark/
Netherlands/Italy/
Switcherland/Austria/
China/Singapore/
Indonesia/Thailand/
Malaysia/India/
Philippine/Hong Kong/
Slovakia/South Africa/
Spain/Portuguese/
Luxemburg/Belgium/
Czech/Hungary/
Greece/Poland)
"1010": 1000ms
(New Zealand)
1
1
0
1
0
65
1-4
M Lower limit of call
signal ON time
This sets the minimum ON time for detecting call signal (CI) pulses
(number of pulses). 1 pulse is counted if the CI signal remains ON for
the set ON time or longer.
Setting can be made over the range of 150ms to 300ms in 10ms
increments by binary inputting.
(number of pulses). 1 pulse is counted if the CI signal remains ON for
the set ON time or longer.
Setting can be made over the range of 150ms to 300ms in 10ms
increments by binary inputting.
0
"0000": 150ms
(Other country)
"0010": 170ms
(Australia)
(Other country)
"0010": 170ms
(Australia)
0
0
0
0
0
5-8
M Upper limit of call
signal ON time
This sets the maximum ON time for detecting call signal (CI) pulses
(number of pulses). Disregard and do not count as 1 pulse if the CI
signal remains ON for the set ON time or longer.
Setting can be made over the range of 3000ms to 4500ms in 100ms
increments by binary inputting.
(number of pulses). Disregard and do not count as 1 pulse if the CI
signal remains ON for the set ON time or longer.
Setting can be made over the range of 3000ms to 4500ms in 100ms
increments by binary inputting.
0
3000ms
0
0
0
0
0
66
1-4
M Lower limit of call
signal OFF time
This sets the minimum OFF time for detecting call signal (CI) pulses
(number of pulses). 1 pulse is counted if the CI signal remains OFF for
the set OFF time or longer.
Setting can be made over the range of 100ms to 1500ms in 100ms
increments by binary inputting.
Setting range
When 0 is set, initial value 700ms operation takes place.
(number of pulses). 1 pulse is counted if the CI signal remains OFF for
the set OFF time or longer.
Setting can be made over the range of 100ms to 1500ms in 100ms
increments by binary inputting.
Setting range
When 0 is set, initial value 700ms operation takes place.
0
700ms
1
1
1
1
1
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
Click on the first or last page to see other MX-FXX1 (serv.man2) service manuals if exist.