Sharp MX-FXX1 (serv.man2) Service Manual ▷ View online
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 28
25
1-2
M Volume setting of call
sound (medium)
This sets the medium (system setting) volume level of the call sound
outputted from the speaker. This includes volume of BZ-related
(communication completion sound, communication error sound) and
on-hook sounds.
"00": Volume level 3
"01": Volume level 5
"10": Volume level 7
"11": Volume level 9
outputted from the speaker. This includes volume of BZ-related
(communication completion sound, communication error sound) and
on-hook sounds.
"00": Volume level 3
"01": Volume level 5
"10": Volume level 7
"11": Volume level 9
0
Volume level 5
1
3-4
M Volume setting of call
sound (small)
This sets the small (system setting) volume level of the call sound
outputted from the speaker. This includes volume of BZ-related
(communication completion sound, communication error sound) and
on-hook sounds.
"00": Volume level 0 (no sound)
"01": Volume level 1
"10": Volume level 2
"11": Volume level 3
outputted from the speaker. This includes volume of BZ-related
(communication completion sound, communication error sound) and
on-hook sounds.
"00": Volume level 0 (no sound)
"01": Volume level 1
"10": Volume level 2
"11": Volume level 3
1
Volume level 2
0
5-6
M Volume setting of line
monitor sound (large)
This sets the large (system setting) volume level of the line monitor
sound outputted from the speaker.
"00": Volume level 9
"01": Volume level 11
"10": Volume level 13
"11": Volume level 15
sound outputted from the speaker.
"00": Volume level 9
"01": Volume level 11
"10": Volume level 13
"11": Volume level 15
1
Volume level 15
1
7-8
M Volume setting of line
monitor sound
(medium)
(medium)
This sets the medium (system setting) volume level of the line monitor
sound outputted from the speaker.
"00": Volume level 5
"01": Volume level 7
"10": Volume level 9
"11": Volume level11
sound outputted from the speaker.
"00": Volume level 5
"01": Volume level 7
"10": Volume level 9
"11": Volume level11
1
Volume level 11
1
26
1-2
M Volume setting of line
monitor sound (small)
This sets the small (system setting) volume level of the line monitor
sound outputted from the speaker.
"00": Volume level 1
"01": Volume level 3
"10": Volume level 5
"11": Volume level 7
sound outputted from the speaker.
"00": Volume level 1
"01": Volume level 3
"10": Volume level 5
"11": Volume level 7
1
Volume level 7
1
3
M External telephone
notification at times of
remote changeover
remote changeover
Setting to determine whether or not to send alarm notification to an
external telephone when remote changeover from the external
telephone is performed.
"0": Notify
"1": Do not notify
external telephone when remote changeover from the external
telephone is performed.
"0": Notify
"1": Do not notify
0
Notify.
4
M Remote changeover
permitted
Setting to determine whether to make only call arrival by remote
changeover from an external telephone valid or to make both call
transmission and arrival valid.
"0": Only call arrival
"1": Call transmission and arrival
changeover from an external telephone valid or to make both call
transmission and arrival valid.
"0": Only call arrival
"1": Call transmission and arrival
0
Only call arrival
5-7
M Setting of call time (TO
timer setting) in
automatic transmission
automatic transmission
Setting to determine how many seconds to call when the other party
doesn’t respond at times of automatic transmission.
Setting can be made over the range of 30 seconds to 60 seconds in 15-
second increments by binary inputting N ((15 seconds x N) + 30
seconds).
The initial value is reverted to if a value outside of the setting range is
set.
doesn’t respond at times of automatic transmission.
Setting can be made over the range of 30 seconds to 60 seconds in 15-
second increments by binary inputting N ((15 seconds x N) + 30
seconds).
The initial value is reverted to if a value outside of the setting range is
set.
0
45 seconds
0
1
1
8
M External telephone
setting when no sound
is set
is set
Setting to determine whether or not to use external telephone when no
sound is set.
When the no sound priority setting is made, reception operation is
soundless but communications cannot be sent to and from an external
telephone.
When the external telephone priority setting is made, communications
can be sent to and from an external telephone, but reception operation
sounds once.
"0": External telephone priority
"1": No sound priority
sound is set.
When the no sound priority setting is made, reception operation is
soundless but communications cannot be sent to and from an external
telephone.
When the external telephone priority setting is made, communications
can be sent to and from an external telephone, but reception operation
sounds once.
"0": External telephone priority
"1": No sound priority
0
External telephone
priority
priority
27
1-8
M External telephone off-
hook detection time
Set the time for detecting and confirming external telephone off-hook.
Setting can be made over the range of 0ms to 2550ms in 10ms
increments by binary inputting.
Setting can be made over the range of 0ms to 2550ms in 10ms
increments by binary inputting.
0
300ms
0
0
1
1
1
1
0
0
1
1
1
1
0
28
1-8
Not used
0
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 29
29
1-8
M Not used
0
1
0
1
1
0
1
0
1
0
1
1
0
1
0
30
1-3
M CNG signal detection
time (during automatic
changeover between
TEL/FAX)
changeover between
TEL/FAX)
When automatic changeover between TEL/FAX is valid, set the time for
detecting the CNG signal from the other party’s machine within the set
time from completion of audio response transmission to sounding of the
simulated ring.
Setting can be made over the range of 0 to 15 seconds in 1-second
increments by binary inputting.
Operation is activated at the set value + 2 seconds. However, if the
setting is 0, operation is activated at 0 second.
Care is required when setting long times because the calling side will
experience an extended spell without any sound.
detecting the CNG signal from the other party’s machine within the set
time from completion of audio response transmission to sounding of the
simulated ring.
Setting can be made over the range of 0 to 15 seconds in 1-second
increments by binary inputting.
Operation is activated at the set value + 2 seconds. However, if the
setting is 0, operation is activated at 0 second.
Care is required when setting long times because the calling side will
experience an extended spell without any sound.
0
0 second
0
0
0
4-7
M Not used
0
0
0
1
0
0
1
8
0
31
1-4
Not used
"0000": North America/Australia/U.K./Sweden/Finland/Norway/
Denmark/Netherlands/Italy/Switcherland/Austria/New Zealand/China/
Singapore/Indonesia/Thailand/Malaysia/India/Philippine/Hong Kong/
Taiwan/Middle East/Slovakia/Other3/Rusia/South Africa/Spain/
Portuguese/Luxemburg/Belgium/Czech/Hungary/Greece/Poland
"1100": France/Germany
Denmark/Netherlands/Italy/Switcherland/Austria/New Zealand/China/
Singapore/Indonesia/Thailand/Malaysia/India/Philippine/Hong Kong/
Taiwan/Middle East/Slovakia/Other3/Rusia/South Africa/Spain/
Portuguese/Luxemburg/Belgium/Czech/Hungary/Greece/Poland
"1100": France/Germany
0
0
0
0
0
0
0
5
Document content print
when sending (PC-Fax
(Internet Fax) report
table)
when sending (PC-Fax
(Internet Fax) report
table)
Setting to print images or not on the report table when sending PC-Fax
(Internet Fax).
"0": Not print
"1": Print
When the system setting is set so that images are added in the
communication report table, if the destination is a PC-Fax (Internet
Fax), the document contents are printed by this setting.
(Internet Fax).
"0": Not print
"1": Print
When the system setting is set so that images are added in the
communication report table, if the destination is a PC-Fax (Internet
Fax), the document contents are printed by this setting.
0
Not print
6-8
M Ringback tone send
level correction
When sending the ringback tone, this sets the corrected value from the
signal send level.
Setting can be made over the range of 0 (0dBm) to 7 (-7.0dBm) in
increments of -1dBm by binary inputting.
signal send level.
Setting can be made over the range of 0 (0dBm) to 7 (-7.0dBm) in
increments of -1dBm by binary inputting.
1
-5.0dBm
0
1
1
32
1-4
M T1 timer setting
Setting to determine how many seconds the line is connected when the
other party’s machine doesn’t respond to FAX communication.
Setting can be made over the range of 30 to 105 seconds in 5-second
increments by binary inputting ((5 seconds x N) + 30 seconds).
T1 timer is the timer used from the point where the other party’s
machine recognizes (CED or DCS) as FAX following line connection.
35±5 seconds according to the ITU-T standard.
other party’s machine doesn’t respond to FAX communication.
Setting can be made over the range of 30 to 105 seconds in 5-second
increments by binary inputting ((5 seconds x N) + 30 seconds).
T1 timer is the timer used from the point where the other party’s
machine recognizes (CED or DCS) as FAX following line connection.
35±5 seconds according to the ITU-T standard.
0
40 seconds
0
1
0
1
0
5-8
Not used
0
0
0
0
0
0
0
33
1-2
M T4 timer setting
Timer during automatic
operation (+1.5
seconds at times of
manual operation)
operation (+1.5
seconds at times of
manual operation)
This sets the timer for up until reception of the response.
+1.5 seconds at times of manual operation
"00": 3 seconds
"01": 4 seconds
"10": 5 seconds
"11": 6 seconds
This is the timer for up until reception of the response to the DCS
signal, etc. 3 seconds ±15% under the ITU-T standard.
+1.5 seconds at times of manual operation
"00": 3 seconds
"01": 4 seconds
"10": 5 seconds
"11": 6 seconds
This is the timer for up until reception of the response to the DCS
signal, etc. 3 seconds ±15% under the ITU-T standard.
0
3 seconds
0
3
Not used
0
4
M Selection of date and
transmission source
print language
<Format>
print language
<Format>
Setting to determine the format of the date and transmission source
attached when transmitting FAX.
"0": Date format
"1": North American format
attached when transmitting FAX.
"0": Date format
"1": North American format
0
Date format
5
M EOL detection timer
Setting to determine how many seconds to set the detection timer for
EOL (EndOfLine) during Phase-C reception in G3.
"1": Setting to 25 seconds
"0": Setting to 13 seconds
When error occurs in EOL detection, treat as non-detection of EOL.
EOL (EndOfLine) during Phase-C reception in G3.
"1": Setting to 25 seconds
"0": Setting to 13 seconds
When error occurs in EOL detection, treat as non-detection of EOL.
0
13 seconds
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 30
33
6-8
Not used
"010": North America
"001": Australia/U.K./France/Germany/Sweden/Finland/Norway/
Denmark/Netherlands/Italy/Switcherland/Austria/New Zealand/China/
Singapore/Indonesia/Malaysia/India/Philippine/Hong Kong/Middle East/
Slovakia/Other3/Spain/Portuguese/Luxemburg/Belgium/Czech/
Hungary/Greece/Poland
"011": Taiwan
"100": Thailand/Rusia/South Africa
"001": Australia/U.K./France/Germany/Sweden/Finland/Norway/
Denmark/Netherlands/Italy/Switcherland/Austria/New Zealand/China/
Singapore/Indonesia/Malaysia/India/Philippine/Hong Kong/Middle East/
Slovakia/Other3/Spain/Portuguese/Luxemburg/Belgium/Czech/
Hungary/Greece/Poland
"011": Taiwan
"100": Thailand/Rusia/South Africa
0
1
0
1
0
34
1-2
Not used
0
0
0
3-6
M Modem transmission
speed (Other than
V.34) (DCS)
V.34) (DCS)
This sets the initial speed (upper limit) in transmission of other than
V.34. Reflect in DCS.
When the default setting is made, V.17 14400bps is notified to the other
party’s machine.
Communication does not always happen at this speed.
V.34. Reflect in DCS.
When the default setting is made, V.17 14400bps is notified to the other
party’s machine.
Communication does not always happen at this speed.
1
V.17 14400bps
0
0
0
0
0
7-8
M Fixing of modem
speed during reception
(Other than V.34) (DIS)
(Other than V.34) (DIS)
This sets the initial speed (upper limit) in transmission of other than
V.34.
When the default setting is made, V.17 14400bps is notified to the other
party’s machine.
Communication does not always happen at this speed.
"00": Not fixed
"01": V.29-9600bps
"10": V.27ter-4800bps
"11": V.17-14400bps
V.34.
When the default setting is made, V.17 14400bps is notified to the other
party’s machine.
Communication does not always happen at this speed.
"00": Not fixed
"01": V.29-9600bps
"10": V.27ter-4800bps
"11": V.17-14400bps
0
Not fixed
0
35
1-2
M [Line1] Coding
capacity during
transmission and
reception (V.34
communication)
(reflected in DIS/DCS/
DTC)
transmission and
reception (V.34
communication)
(reflected in DIS/DCS/
DTC)
This sets the coding capacity that is communicated to the other party’s
machine in V.34 communication.
"00": JBIG/MMR/MR/MH
"01": MMR/MR/MH
"10": MR/MH
"11": MH
machine in V.34 communication.
"00": JBIG/MMR/MR/MH
"01": MMR/MR/MH
"10": MR/MH
"11": MH
0
JBIG/MMR/MR/MH
0
3-4
M [Line1] Coding
capacity during
transmission and
reception (other than
V.34 communication)
(reflected in DIS/DCS/
DTC)
transmission and
reception (other than
V.34 communication)
(reflected in DIS/DCS/
DTC)
This sets the coding capacity that is communicated to the other party’s
machine in communication other than V.34.
"00": JBIG/MMR/MR/MH
"01": MMR/MR/MH
"10": MR/MH
"11": MH
machine in communication other than V.34.
"00": JBIG/MMR/MR/MH
"01": MMR/MR/MH
"10": MR/MH
"11": MH
0
JBIG/MMR/MR/MH
0
5-6
M Not used
0
0
0
7-8
M Image capacity when
polling (Reflected in
DTC)
DTC)
This sets the image capacity of the machine when polling.
Reflect in DTC.
"00": Very fine
"01": Fine
"10": Small letters
"11": Ordinary lettering
Control the image capacity when receiving by means of "Image
capacity when receiving."
For 600dpi, set by means of "600dpi resolution capacity setting
(reflected in DTC)."
Reflect in DTC.
"00": Very fine
"01": Fine
"10": Small letters
"11": Ordinary lettering
Control the image capacity when receiving by means of "Image
capacity when receiving."
For 600dpi, set by means of "600dpi resolution capacity setting
(reflected in DTC)."
0
Very fine
0
36
1-7
Not used
0
0
0
0
0
1
0
0
0
0
0
1
0
8
M Confirmation of DIS
reception when
sending
sending
Setting to determine how to confirm DIS reception when transmitting.
"0": Setting to confirm that reception occurs once when receiving NSF/
DIS and twice when there is no NSF.
"1": Setting to confirm DIS is always received twice.
Valid apart from V.34
"0": Setting to confirm that reception occurs once when receiving NSF/
DIS and twice when there is no NSF.
"1": Setting to confirm DIS is always received twice.
Valid apart from V.34
0
Confirm that reception
occurs once when
receiving NSF/DIS
and twice when there
is no NSF.
occurs once when
receiving NSF/DIS
and twice when there
is no NSF.
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
"0000": V.27ter 2400bps
"1000": V.17 14400bps
"0001": V.29
9600bps
"1001": V.17 9600bps
"0010": V.27ter 4800bps
"1010": V.17 12000bps
"0011": V.29
7200bps
"1011": V.17 7200bps
"0100": V.33
14400bps
"1100": V.17 14400bps
"0101": V.17
14400bps
"1101": V.17 14400bps
"0110": V.33
12000bps
"1110": V.17 14400bps
"0111": V.17
14400bps
"1111": V.17 14400bps
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 31
37
1-8
Not used
0
1
0
1
1
0
0
0
1
0
1
1
0
0
0
38
1-2
M Protocol monitor
Setting to determine whether or not the protocol monitor (recognized by
the FAX) for 1 communication is printed.
"00": No (do not print)
"01": No (do not print)
"10": Print (always)
"11": Only at times of error (print)
When a new communication occurs before the protocol monitor is
printed, delete the old protocol data (overwrite).
the FAX) for 1 communication is printed.
"00": No (do not print)
"01": No (do not print)
"10": Print (always)
"11": Only at times of error (print)
When a new communication occurs before the protocol monitor is
printed, delete the old protocol data (overwrite).
0
No (do not print)
0
3
Line monitor display
Setting to determine whether or not the communication speed during
communication and reception level during reception are displayed on
the LCD.
"0": Do not display on LCD
"1": Display on LCD
communication and reception level during reception are displayed on
the LCD.
"0": Do not display on LCD
"1": Display on LCD
0
Do not display on LCD
4
M EEPROM access
prohibited
When access to EEPROM in the modem controller is poor (F6-01/F7-
01), since the FAX cannot be operated, this setting is put to "Prohibited"
in order to enable FAX operation.
EEPROM contains the modem controller adjustment value (part of the
soft switch) in its memory.
Setting to determine permission or prohibition of EEPROM access.
"0": EEPROM access permitted
"1": EEPROM access prohibited
01), since the FAX cannot be operated, this setting is put to "Prohibited"
in order to enable FAX operation.
EEPROM contains the modem controller adjustment value (part of the
soft switch) in its memory.
Setting to determine permission or prohibition of EEPROM access.
"0": EEPROM access permitted
"1": EEPROM access prohibited
0
Access permitted
5
Not used
0
6
M SDT signal detection
Setting to determine whether or not to detect the SDT signal, which is
the second dial tone when transmitting to the F-net.
When the SDT signal is not detected, ordinary dialling is conducted
even after 16X dialling.
"0": Do not detect
"1": Detect
the second dial tone when transmitting to the F-net.
When the SDT signal is not detected, ordinary dialling is conducted
even after 16X dialling.
"0": Do not detect
"1": Detect
0
Do not detect
7-8
M Timer setting (V.21-
FSK) between flag-
adrs
adrs
This sets the timer between Flag-adrs when receiving FSK signals in
communications of other than V.34.
Reception of V.34 FSK signals does not correspond to this soft switch.
"00": 6 seconds
"01": 20 seconds
"10": 30 seconds
"11": 120 seconds
Valid apart from V.34
communications of other than V.34.
Reception of V.34 FSK signals does not correspond to this soft switch.
"00": 6 seconds
"01": 20 seconds
"10": 30 seconds
"11": 120 seconds
Valid apart from V.34
0
20 seconds
1
39
1
M Echo countermeasure
(CED tone sending
interval) when
receiving
interval) when
receiving
Setting to determine how many seconds the interval is from sending
CED or ANSam to sending the DIS FSK signal.
"0": 75msec
"1": 500msec
CED or ANSam to sending the DIS FSK signal.
"0": 75msec
"1": 500msec
0
75msec
2
M Echo countermeasure
(setting of hold time
between DIS reception
and sending of signal)
when transmitting.
between DIS reception
and sending of signal)
when transmitting.
Setting to determine how many seconds the interval is from receiving
DIS to sending the DCS signal. This is only valid for communications of
other than V.34.
"0": 500msec
"1": 800msec
Valid apart from V.34
DIS to sending the DCS signal. This is only valid for communications of
other than V.34.
"0": 500msec
"1": 800msec
Valid apart from V.34
0
500msec
3-6
Not used
0
0
0
1
0
0
1
7-8
M RTN sending line error
rate
This sets the threshold value for determining RTN sending during V.17
reception. The threshold value is converted to STD. RTP sending is
deemed to occur at 1/2 of this value.
"00": 6line
"01": 12line
"10": 60line
"11": 120line
For example, at times of FINE reception, the threshold value is 2 times.
At times of SFINE and UFINE, the threshold value is 4 times.
Number of error lines in the STD standard
reception. The threshold value is converted to STD. RTP sending is
deemed to occur at 1/2 of this value.
"00": 6line
"01": 12line
"10": 60line
"11": 120line
For example, at times of FINE reception, the threshold value is 2 times.
At times of SFINE and UFINE, the threshold value is 4 times.
Number of error lines in the STD standard
1
60 line
0
SW
No.
No.
Bit
No.
Spe
ci
a
l
Item
SW selection and function
Initial value
System
settings
Click on the first or last page to see other MX-FXX1 (serv.man2) service manuals if exist.