Sharp MX-FXX1 (serv.man2) Service Manual ▷ View online
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 4
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button is
pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items G are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item G after settlement of values>
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to F, the data are saved to EEPROM
and RAM and set to item G at the same time.
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to F, the data are saved to EEPROM
and RAM and set to item G at the same time.
46-42
Purpose
: Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Fine text). (Only when FAX is
installed)
installed)
Section
: MFP/FAX
Item
: Image quality
Operation/Procedure
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
Item
Display item &
Detail of display
Content
Set
range
Default
value
A
AUTO
Auto
1 to 99
50
B
EXPOSURE1
Exposure 1
1 to 99
50
C
EXPOSURE2
Exposure 2
1 to 99
50
D
EXPOSURE3
Exposure 3
1 to 99
50
E
EXPOSURE4
Exposure 4
1 to 99
50
F
EXPOSURE5
Exposure 5
1 to 99
50
G
EXECUTE
MODE
MODE
AUTO
Print
mode
mode
Auto
1
1 (AUTO)
EXP1
Exposure 1
2
EXP2
Exposure 2
3
EXP3
Exposure 3
4
EXP4
Exposure 4
5
EXP5
Exposure 5
6
0
A:
A㧦 50
㧧
AUTO
B㧦 50
㧧
EXPOSURE1
SIMULATION NO.46-41
EXPOSURE ADJUSTMENT(FAX㧦NORMAL)
50
㨇
1㨪 99㨉
OK
TEST
EXECUTE
CLOSE
C㧦 50
㧧
EXPOSURE2
D㧦 50
㧧
EXPOSURE3
Item
Display item & Detail of display
Content
Set range
Default value
A
AUTO
Fine/Auto
1 to 99
50
B
EXPOSURE1
Fine/Exposure 1
1 to 99
50
C
EXPOSURE2
Fine/Exposure 2
1 to 99
50
D
EXPOSURE3
Fine/Exposure 3
1 to 99
50
E
EXPOSURE4
Fine/Exposure 4
1 to 99
50
F
EXPOSURE5
Fine/Exposure 5
1 to 99
50
G
AUTO H_TONE
Fine/Auto/Half tone
1 to 99
50
H
EXPOSURE1 H_TONE
Fine/Exposure 1/Half tone
1 to 99
50
I
EXPOSURE2 H_TONE
Fine/Exposure 2/Half tone
1 to 99
50
J
EXPOSURE3 H_TONE
Fine/Exposure 3/Half tone
1 to 99
50
K
EXPOSURE4 H_TONE
Fine/Exposure 4/Half tone
1 to 99
50
L
EXPOSURE5 H_TONE
Fine/Exposure 5/Half tone
1 to 99
50
M
EXECUTE MODE
AUTO
Print mode
Fine/Auto
1 to 12
1
1 (AUTO)
EXP1
Fine/Exposure 1
2
EXP2
Fine/Exposure 2
3
EXP3 Fine/Exposure
3
4
EXP4 Fine/Exposure
4
5
EXP5
Fine/Exposure 5
6
AUTO H_TONE
Fine/Auto/Half tone
7
EXP1 H_TONE
Fine/Exposure 1/Half tone
8
EXP2 H_TONE
Fine/Exposure 2/Half tone
9
EXP3 H_TONE
Fine/Exposure 3/Half tone
10
EXP4 H_TONE
Fine/Exposure 4/Half tone
11
EXP5 H_TONE
Fine/Exposure 5/Half tone
12
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 5
* Items M are displayed as "Display item : Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of the values>
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
46-43
Purpose
: Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Super Fine). (Only when FAX is
installed)
installed)
Section
: MFP/FAX
Item
: Image quality
Operation/Procedure
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of the values>
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
46-44
Purpose
: Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Ultra Fine). (Only when FAX is
installed)
installed)
Section
: MFP/FAX
Item
: Image quality
Operation/Procedure
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
played in the setting area.
0
A:
A : 50
AUTO
B : 50
EXPOSURE1
SIMULATION NO.46-42
EXPOSURE ADJUSTMENT(FAX : FFINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
EXPOSURE2
D : 50
EXPOSURE3
Item
Display item & Detail of display
Content
Set range
Default value
A
AUTO
Super Fine/Auto
1 to 99
50
B
EXPOSURE1
Super Fine/Exposure 1
1 to 99
50
C
EXPOSURE2
Super Fine/Exposure 2
1 to 99
50
D
EXPOSURE3
Super Fine/Exposure 3
1 to 99
50
E
EXPOSURE4
Super Fine/Exposure 4
1 to 99
50
F
EXPOSURE5
Super Fine/Exposure 5
1 to 99
50
G
AUTO H_TONE
Super Fine/Auto/Half tone
1 to 99
50
H
EXPOSURE1 H_TONE
Super Fine/Exposure 1/Half tone
1 to 99
50
I
EXPOSURE2 H_TONE
Super Fine/Exposure 2/Half tone
1 to 99
50
J
EXPOSURE3 H_TONE
Super Fine/Exposure 3/Half tone
1 to 99
50
K
EXPOSURE4 H_TONE
Super Fine/Exposure 4/Half tone
1 to 99
50
L
EXPOSURE5 H_TONE
Super Fine/Exposure 5/Half tone
1 to 99
50
M
EXE-CUTE MODE
AUTO
Print mode
Super Fine/Auto
1 to 12
1
1 (AUTO)
EXP1
Super Fine/Exposure 1
2
EXP2
Super Fine/Exposure 2
3
EXP3
Super Fine/Exposure 3
4
EXP4
Super Fine/Exposure 4
5
EXP5
Super Fine/Exposure 5
6
AUTO H_TONE
Super Fine/Auto/Half tone
7
EXP1 H_TONE
Super Fine/Exposure 1/Half tone
8
EXP2 H_TONE
Super Fine/Exposure 2/Half tone
9
EXP3 H_TONE
Super Fine/Exposure 3/Half tone
10
EXP4 H_TONE
Super Fine/Exposure 4/Half tone
11
EXP5 H_TONE
Super Fine/Exposure 5/Half tone
12
0
A:
A : 50
;
AUTO
B : 50
;
EXPOSURE1
SIMULATION NO.46-43
EXPOSURE ADJUSTMENT(FAX : SUPER FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
;
EXPOSURE2
D : 50
;
EXPOSURE3
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 6
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of values>
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
46-45
Purpose
: Adjustment
Function (Purpose) : Used to execute the FAX exposure level
adjustment and the individual setting
(600DPI). (Only when FAX is installed)
(600DPI). (Only when FAX is installed)
Section
: FAX
Item
: Image quality
Operation/Procedure
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is pressed,
the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button
is pressed during printing, the operation is interrupted.
Item
Display item & Detail of display
Content
Default value
Default value
Writing
A
AUTO
Ultra Fine/Auto
1 to 99
50
YES
B
EXPOSURE1
Ultra Fine/Exposure 1
1 to 99
50
YES
C
EXPOSURE2
Ultra Fine/Exposure 2
1 to 99
50
YES
D
EXPOSURE3
Ultra Fine/Exposure 3
1 to 99
50
YES
E
EXPOSURE4
Ultra Fine/Exposure 4
1 to 99
50
YES
F
EXPOSURE5
Ultra Fine/Exposure 5
1 to 99
50
YES
G
AUTO H_TONE
Ultra Fine/Auto/Half tone
1 to 99
50
YES
H
EXPOSURE1 H_TONE
Ultra Fine/Exposure 1/Half tone
1 to 99
50
YES
I
EXPOSURE2 H_TONE
Ultra Fine/Exposure 2/Half tone
1 to 99
50
YES
J
EXPOSURE3 H_TONE
Ultra Fine/Exposure 3/Half tone
1 to 99
50
YES
K
EXPOSURE4 H_TONE
Ultra Fine/Exposure 4/Half tone
1 to 99
50
YES
L
EXPOSURE5 H_TONE
Ultra Fine/Exposure 5/Half tone
1 to 99
50
YES
M
EXECUTE MODE
AUTO
Print mode
Ultra Fine/Auto
1 to 12
1
1 (AUTO)
NO
EXP1
Ultra Fine/Exposure 1
2
EXP2
Ultra Fine/Exposure 2
3
EXP3
Ultra Fine/Exposure 3
4
EXP4
Ultra Fine/Exposure 4
5
EXP5
Ultra Fine/Exposure 5
6
AUTO H_TONE
Ultra Fine/Auto/Half tone
7
EXP1 H_TONE
Ultra Fine/Exposure 1/Half tone
8
EXP2 H_TONE
Ultra Fine/Exposure 2/Half tone
9
EXP3 H_TONE
Ultra Fine/Exposure 3/Half tone
10
EXP4 H_TONE
Ultra Fine/Exposure 4/Half tone
11
EXP5 H_TONE
Ultra Fine/Exposure 5/Half tone
12
0
A:
A : 50
;
AUTO
B : 50
;
EXPOSURE1
SIMULATION NO.46-44
EXPOSURE ADJUSTMENT(FAX : ULTRA FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
;
EXPOSURE2
D : 50
;
EXPOSURE3
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 7
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
50
50-27
Purpose
: Adjustment
Function (Purpose) : Used to adjust the image loss of scanned
image in the FAX/Scanner mode.
Section
: FAX/Scanner
Item
: Image quality
Operation/Procedure
1)
Use [FAX] button and [SCANNER] button to select the mode.
2)
Select the set item with [
↑] and [↓] buttons.
The highlighted section of the set value is switched and dis-
played on the set setting area.
* If there is any item over [
played on the set setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
3)
Enter the set value with 10-key.
* Press [C] key to clear the entered values.
* Press [C] key to clear the entered values.
4)
When [OK] button is pressed, the current entered value is
saved to EEPROM and RAM.
* When [
saved to EEPROM and RAM.
* When [
↑], [↓] button, [COLOR], or [BLACK] key is pressed,
the data are saved to EEPROM and RAM.
* When [CLOSE] button is pressed, the display is shifted to the
copy basic screen of simulation.
* Copying can be performed also by pressing [COLOR]/[BLACK]
key.
<Set range and default value of each setup>
Item
Display item & Detail of display
Content
Set range
Default value
Writing
A
AUTO
600dpi/Auto
1 to 99
50
YES
B
EXPOSURE1
600dpi/Exposure 1
1 to 99
50
YES
C
EXPOSURE2
600dpi/Exposure 2
1 to 99
50
YES
D
EXPOSURE3
600dpi/Exposure 3
1 to 99
50
YES
E
EXPOSURE4
600dpi/Exposure 4
1 to 99
50
YES
F
EXPOSURE5
600dpi/Exposure 5
1 to 99
50
YES
G
AUTO H_TONE
600dpi/Auto/Half tone
1 to 99
50
YES
H
EXPOSURE1 H_TONE
600dpi/Exposure 1/Half tone
1 to 99
50
YES
I
EXPOSURE2 H_TONE
600dpi/Exposure 2/Half tone
1 to 99
50
YES
J
EXPOSURE3 H_TONE
600dpi/Exposure 3/Half tone
1 to 99
50
YES
K
EXPOSURE4 H_TONE
600dpi/Exposure 4/Half tone
1 to 99
50
YES
L
EXPOSURE5 H_TONE
600dpi/Exposure 5/Half tone
1 to 99
50
YES
M
EXECUTE MODE
AUTO
Print mode
600dpi/Auto
1 to 12
1
1 (AUTO)
NO
EXP1
600dpi/Exposure 1
2
EXP2
600dpi/Exposure 2
3
EXP3
600dpi/Exposure 3
4
EXP4
600dpi/Exposure 4
5
EXP5
600dpi/Exposure 5
6
AUTO H_TONE
600dpi/Auto/Half tone
7
EXP1 H_TONE
600dpi/Exposure 1/Half tone
8
EXP2 H_TONE
600dpi/Exposure 2/Half tone
9
EXP3 H_TONE
600dpi/Exposure 3/Half tone
10
EXP4 H_TONE
600dpi/Exposure 4/Half tone
11
EXP5 H_TONE
600dpi/Exposure 5/Half tone
12
0
A:
A㧦 50
㧧
AUTO
B㧦 50
㧧
EXPOSURE1
SIMULATION NO.46-45
EXPOSURE ADJUSTMENT(FAX㧦600DPI)
50
㨇
1㨪 99㨉
OK
TEST
EXECUTE
CLOSE
C㧦 50
㧧
EXPOSURE2
D㧦 50
㧧
EXPOSURE3
Item
Display item
Description
Set range
Default value
FAX send
A
Image loss
setting OC
setting OC
LEAD_EDGE (OC)
OC lead edge image loss setting
0 to 100
30 (3mm)
B
FRONT_REAR (OC)
OC side image loss setting
0 to 100
20 (2mm)
C
TRAIL_EDGE (OC)
OC rear edge image loss setting
0 to 100
20 (2mm)
D
Image loss
setting SPF
SIDE1
setting SPF
SIDE1
LEAD_EDGE (SPF_SIDE1)
Front surface lead edge image loss setting
0 to 100
20 (2mm)
E
FRONT_REAR (SPF_SIDE1)
Front surface side image loss setting
0 to 100
20 (2mm)
F
TRAIL_EDGE (SPF_SIDE1)
Front surface rear edge image loss setting
0 to 100
30 (3mm)
G
Image loss
setting SPF
SIDE2
setting SPF
SIDE2
LEAD_EDGE (SPF_SIDE2)
Back surface lead edge image loss setting
0 to 100
20 (2mm)
H
FRONT_REAR (SPF_SIDE2)
Back surface side image loss setting
0 to 100
20 (2mm)
I
TRAIL_EDGE (SPF_SIDE2)
Back surface rear edge image loss setting
0 to 100
30 (3mm)
Click on the first or last page to see other MX-FXX1 (serv.man2) service manuals if exist.