Sharp MX-BM50 (serv.man2) Service Manual ▷ View online
BM-1-28
11 Feb 2013
Cover Feeder Installation
COVER FEEDER INSTALLATION
1. Install the Feed roller assembly [A] by pressing it to the front side and lifting it
into position according to arrows [B].
2. Make sure that the Feed roller locks into position [C].
[B]
[A]
[C]
BM-1-29
11 Feb 2013
COVER FEEDER INSTALLATION
Removal of Booklet Maker Top Cover
1. Remove screws [A] ( x 4.
2. Remove screws [B] ( x 2).
3. Remove screws [C] ( x 3).
4. Remove screws [D] ( x 2).
5. Remove top cover [E].
2. Remove screws [B] ( x 2).
3. Remove screws [C] ( x 3).
4. Remove screws [D] ( x 2).
5. Remove top cover [E].
[B]
[A]
[C]
[E]
[D]
BM-1-30
11 Feb 2013
Cover Feeder Installation
COVER FEEDER INSTALLATION
[B]
[A]
1. Remove screws [A]( x 2).
2. Remove the Cover Feeder dummy [B].
2. Remove the Cover Feeder dummy [B].
Cover Feeder Dummy
BM-1-31
11 Feb 2013
COVER FEEDER INSTALLATION
Installing the Cover Feeder
1. Install the Cover Feeder in the exact same position as the Cover Feeder dummy was installed.
Fasten with screws ( x 2).
Click on the first or last page to see other MX-BM50 (serv.man2) service manuals if exist.