Sharp MX-BM50 (serv.man2) Service Manual ▷ View online
11 Feb 2013
AREA
A
BM-3-21
AREA A
REP 3.4.3 INFEED TRANSPORT MODULE
1. Remove connectors [A] (
x2 ).
2. Cut three cable ties [B].
3. Remove E-clip [B] ( x1 ).
4. Remove pin [D] to remove Infeed transport module.
3. Remove E-clip [B] ( x1 ).
4. Remove pin [D] to remove Infeed transport module.
[A]
[B]
[C]
[D]
picture shows infeed module removed for clarity
11 Feb 2013
BM-3-22
AREA A
REP 3.4.4 INFEED TRANSPORT WHEEL
1. Remove nuts [A] ( x3 ).
2. Remove E-clip [B] ( x1 ).
2. Remove E-clip [B] ( x1 ).
NOTE: Be careful not to drop the plastic bushings on both ends of the Infeed
wheel shaft after removing the E-clip.
Removing the Infeed transport module(
REP 3.4.1 ) facilitates replace-
ment of the Infeed transport wheel.
[A]
[B]
picture shows infeed mod-
ule removed for clarity
11 Feb 2013
AREA
A
BM-3-23
AREA A
REP 3.4.5 INFEED MOTOR M1 & SENSOR Q2
1. Remove nuts [A] ( x3 ).
2. Disconnect the conntectors [B] (
2. Disconnect the conntectors [B] (
x2 ).
3. Remove the screws [C] and remove the motor.
NOTE: The pulley [D] is slided on the motor shaft. Be careful not to drop the
plastic bushing [E] and the washers [F] when removing the motor.
Removing the Infeed transport module (
REP 3.4.1 ) facilitates replace-
ment of the Infeed motor.
[A]
[B]
[C]
[F]
[D]
[E]
picture shows infeed mod-
ule removed for clarity
11 Feb 2013
BM-3-24
AREA A
REP 3.4.6 SIDE GUIDES
Removal
1. Remove screws [A] and remove the side guide [B] ( x2 ).
1. Remove screws [A] and remove the side guide [B] ( x2 ).
NOTE: Be careful not to drop the screws in the machine.
2. Procedure is the same on the other side guide.
Replacement
1. Reverse the removal procedure.
1. Reverse the removal procedure.
NOTE: Make sure that you are using the correct screws (M4 x 8mm) when
reinstalling the side guides. If you are using longer screws, you may damage
the side guide shaft.
Adjustment
1. Adjust Side guide parallelism (
1. Adjust Side guide parallelism (
REP 3.9.2).
[B]
[A]
Click on the first or last page to see other MX-BM50 (serv.man2) service manuals if exist.