Sharp MX-BM50 (serv.man2) Service Manual ▷ View online
11 Feb 2013
Replacement Adjustment
COVERS
BM-3-9
COVERS
REP 3.3.2 LOWER AND UPPER INFEED COVER, CONTINUED
Upper Infeed Cover
1. Remove screws ( x4) [C] and remove Upper Infeed Cover .
1. Remove screws ( x4) [C] and remove Upper Infeed Cover .
Replacement
1. Reverse the removal procedure.
1. Reverse the removal procedure.
[C]
[C]
11 Feb 2013
BM-3-10
COVERS
REP 3.3.3 INFEEDER
1. Disconnect connectors [A] (
x2).
2. Remove upper and lower infeed cover (
REP 3.3.2).
3. Loosen screws [B] ( x4 ).
4. Remove Infeeder .
4. Remove Infeeder .
[A]
[B]
11 Feb 2013
Replacement Adjustment
COVERS
BM-3-11
COVERS
REP 3.3.4 OUTFEED COVER
[A]
1. Set the machine to paper size 12x18”.
2. If present, remove stacker module (
2. If present, remove stacker module (
REP 3.3.2).
3. Remove front and rear cover (
REP 3.3.1).
4. Remove screws [A] ( x4 ).
5. Remove screws [B] ( x2 ).
6. Loosen screws [C] ( x2 ).
7. Pull out lower end of the Outfeed Cover and lift it up enough to clear the Outfeed Sensor [D].
8. Pull out upper end of the Outfeed Cover and lower it until it touches the Fold Gate.
5. Remove screws [B] ( x2 ).
6. Loosen screws [C] ( x2 ).
7. Pull out lower end of the Outfeed Cover and lift it up enough to clear the Outfeed Sensor [D].
8. Pull out upper end of the Outfeed Cover and lower it until it touches the Fold Gate.
[B]
[D]
[C]
11 Feb 2013
BM-3-12
COVERS
REP 3.3.5 TOP COVER
1. Remove screws [A] ( x 4.
2. Remove screws [B] ( x 2).
3. Remove screws [C] ( x 3).
4. Remove screws [D] ( x 2).
5. Remove top cover [E].
2. Remove screws [B] ( x 2).
3. Remove screws [C] ( x 3).
4. Remove screws [D] ( x 2).
5. Remove top cover [E].
[B]
[A]
[C]
[E]
[D]
Click on the first or last page to see other MX-BM50 (serv.man2) service manuals if exist.