Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) Service Manual ▷ View online
MX-6070V MX-TU16 (EXIT TRAY CABINET) 18 – 1
MX-6070V
Service Manual
[18] MX-TU16 (EXIT TRAY CABINET)
1. Unpacking
A. Packed items check
2. Installation
Before installation, be sure to turn both the operation and main power
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
A. Exit tray cabinet attachment
1)
Open the front cover.
2)
Remove the front cover upper. (Screw x3)
3)
Remove the paper exit unit. (Screw x1, Connector x2)
4)
Remove the locking screw.
No.
Name
Quantity
1
Exit tray cabinet
1
2
Full detection actuator
1
3
Reverse gate tray
1
4
Paper fixture
1
5
Shift motor unit
1
6
Screw M4x8 P-tight
4
7
Screw M4x8 S-tight
2
8
Screw M3x6 S-tight
2
9
Earth strap
(Not used)
1
1
3
4
2
5
6
7
8
9
Ĭ
Ĭ
ĭ
Ĭ
ĭ
Į
į
MX-6070V MX-TU16 (EXIT TRAY CABINET) 18 – 2
5)
Move the shifter lower PG, and align the center of the hole on the
shifter lower PG with the center of the hole on the delivery lower
PG.
shifter lower PG with the center of the hole on the delivery lower
PG.
6)
Align the hole position with the boss, and then mount the shift
motor unit (Packed item No.5).
motor unit (Packed item No.5).
7)
Fix it with the screw (Packed item No.6) and connect the connec-
tor.
tor.
8)
Connect the two connectors.
9)
Attach the paper exit unit.
10) Attach the front cover upper.
Ĭ
ĭ
Į
ĭ
ĭ
Ĭ
MX-6070V MX-TU16 (EXIT TRAY CABINET) 18 – 3
11) Pull out the paper tray1.
12) Pull out the paper tray1, and remove the screw (x1) fixing the left
cover.
13) Open the front cover, and remove the screw (x1) fixing the left
cover.
14) Pull out the grip at the left side of the main unit, and remove the
left cover while sliding it to the front side.
15) Attach the exit tray cabinet (Packed item No.1), and fix it with the
screw.
Ĭ
ĭ
No.8 M3×6 S-tight
No.6 M4×8 P-tight
No.7 M4×8 S-tight
MX-6070V MX-TU16 (EXIT TRAY CABINET) 18 – 4
16) Mount the left cover, and fix it with the screws (x2).
17) Put the grip back to the original position.
18) Close the front cover of the main unit.
19) Close the paper tray1.
20) Attach the full detection actuator (Packed item No.2).
21) Attach the reverse gate tray (Packed item No.3).
22) Attach the paper fixture (Packed item No.4)
B. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet, and
turn ON the main power switch and the operation panel power
switch.
turn ON the main power switch and the operation panel power
switch.
Ĭ
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) service manuals if exist.