Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) Service Manual ▷ View online
MX-6070V MX-PN16B/C/D (PUNCH MODULE) 16 – 4
2)
Connect the connector on punch waste full sensor unit (Packed
item No.2) to the punch unit.
item No.2) to the punch unit.
F. Wiring and connecting a harness
1)
Wire the harness as shown in the photo below.
G. Attachment of Punch cushion A
1)
Attach the Punch cushion A (Packed item No.8) to the inner cover
along the reference face.
along the reference face.
H. Installation of punch waste tray
1)
Install the punch waste tray (Packed item No.4) as shown in the
photo below.
photo below.
I.
Attachment of top cover and rear cover
1)
Attach the top cover by moving toward the direction of an arrow 1.
Then slide the top cover in the direction of an arrow 2.
Then slide the top cover in the direction of an arrow 2.
2)
Close the top cover.
3)
Close the front cover of the finisher.
+DUQHVV
Reference face:
Touch inner cover with left side surface of Punch cushion A.
Touch Punch inner cover with back side of Punch cushion A.
Inner cover
Punch inner cover
Attach the cushion A.
Attach the cushion A.
3XQFKZDVWHWUD\
MX-6070V MX-PN16B/C/D (PUNCH MODULE) 16 – 5
4)
Incline upper part of the rear cover, hook the pawls of the rear
cover to the main unit and attach the rear cover.
cover to the main unit and attach the rear cover.
5)
Fasten 2 screws to rear cover of the finisher.
J. Labelling
1)
Attach the punch position label (for scanner).
2)
Attach the punch position label (for RSPF/DSPF).
K. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet, and
turn ON the main power switch and the operation panel power
switch.
turn ON the main power switch and the operation panel power
switch.
Position of the pawls of the rear cover
and insertion slot on the finisher unit
and insertion slot on the finisher unit
Rear cover
Finisher unit
Use 2 screws for attachment.
)LWZLWKWKHFRUQHU5
/DEHODWWDFKPHQWUHIHUHQFH
&RUQHURIWKHXSSHU
FDELQHWERWWRP
)LWZLWKWKHFRUQHU5
DSPF
RSPF
R2.5 connection line
Edge line R 2.5
CAUTION
Cleaning of the document scan section
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Document scan section
MX-6070V MX-TR19 N (EXIT TRAY UNIT) 17 – 1
MX-6070V
Service Manual
[17] MX-TR19 N (EXIT TRAY UNIT)
1. Unpacking
A. Packed items check
2. Installation
Before installation, be sure to turn both the operation and main power
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
A. Right delivery unit dummy removal
1)
Open the right door.
2)
Remove the screws and the right upper cover.
3)
Remove the screws and ADU paper guide.
B. Right delivery unit installation
1)
Attach the right delivery unit lower to the original positions. Fix the
right delivery unit lower with the screws (4 pcs.)
right delivery unit lower with the screws (4 pcs.)
No.
Name
Quantity
1
Exit tray unit
1
2
paper exit tray
1
3
Full detection actuator
1
4
screw M4×6S-tight
2
5
screw M4×10P-tight
1
6
Harness
(Not used)
1
3
4
5
1
2
6
Ĭ
Ĭ
Ĭ
ĭ
Ĭ
Ĭ
Ĭ
Ĭ
ĭ
ĭ
ĭ
ĭ
ĭ
Ĭ
Packed item No.4
Packed item No.4
MX-6070V MX-TR19 N (EXIT TRAY UNIT) 17 – 2
2)
Connect the harness. Insert the snap band.
3)
Connect the harness with the right delivery unit upper.
4)
Install the exit tray unit (Packed item No.1) with screw.
C. Paper exit tray attachment
1)
Attach the full-detection actuator (Packed item No.3).
2)
Attach the paper exit tray (Packed item No.2).
3)
Close the right door.
D. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet, and
turn ON the main power switch and the operation panel power
switch.
turn ON the main power switch and the operation panel power
switch.
E. Tray setting
1)
Enter Sim26-1 to set RIGHT PAPER EXIT TRAY to 0.
ĭ
ĭ
ĭ
ĭ
ĭ
ĭ
Ĭ
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) service manuals if exist.