Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) Service Manual ▷ View online
MX-6070V MX-FN29 (SADDLE STITCH FINISHER) 12 – 6
F. Installation of the saddle stitch finisher
The basic installation procedure is the same as the finisher.
Only the installation method of the saddle tray is different.
1)
Lift the paper fixing arm, and install the saddle tray.
2)
Lower the paper fixing arm.
MX-6070V MX-PN15B/C/D (PUNCH MODULE) 13 – 1
MX-6070V
Service Manual
[13] MX-PN15B/C/D (PUNCH MODULE)
1. Unpacking
A. Removal of the punch unit
B. Packed items check
No.
Name
Quantity
1
Punch unit
1
2
Resist sensor
1
3
Guide plate
1
4
Hopper
1
5
Stay
1
6
Hopper
1
7
Stepping motor
1
8
Harness
1
9
Screw
15
MX-6070V MX-PN15B/C/D (PUNCH MODULE) 13 – 2
2. Installation
NOTE: Be sure to install the punch unit before installing the finisher to
the main unit. In the case of installing the punch unit afterward,
remove the finisher from the main unit once.
remove the finisher from the main unit once.
NOTE: Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the
power outlet. Make double sure that the data lamp on the
operation panel does not light up or blink when performing
installation.
power outlet. Make double sure that the data lamp on the
operation panel does not light up or blink when performing
installation.
A. Installation of the punch unit
1)
Remove the rear cover of the finisher.
2)
Incline the upper part of the rear cover, and remove the rear cover
while lifting the pawls of the rear cover.
while lifting the pawls of the rear cover.
3)
Open the front cover of the finisher.
4)
Remove the knob.
For MX-FN29 (Saddle finisher), remove the knob.
5)
Remove the inner cover.
Lift the pawls.
MX-6070V MX-PN15B/C/D (PUNCH MODULE) 13 – 3
6)
For MX-FN29 (Saddle finisher), disconnect the interface connec-
tor connected to the inner cover.
tor connected to the inner cover.
7)
Open the upper cover, and remove the resign ring.
8)
Remove the screw and the guide plate.
9)
Remove the screw and the guide plate.
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man4) service manuals if exist.